kernel/linux.git/drivers/gpu/drm/vc4/Kconfig, branch v5.10.263

drm/vc4: Fix Kconfig indentation

2019-11-25T09:04:41+00:00

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20191121132919.29430-1-krzk@kernel.org

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

drm/vc4: add HDMI CEC support

2017-07-26T19:15:12+00:00

This patch adds support to VC4 for CEC. It is under a separate Kconfig option to keep everyone using VC4 from needing to pull in the CEC core. Thanks to Eric Anholt for providing me with the CEC register information. Signed-off-by: Hans Verkuil Signed-off-by: Eric Anholt Reviewed-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/20170716104804.48308-4-hverkuil@xs4all.nl

drm/vc4: Switch DSI to the panel-bridge layer, and support bridges.

2017-06-05T09:37:37+00:00

The newer version of the RPi panel driver is going to be a combination of a bridge and a panel, but we should also support panels without a bridge, so the panel-bridge layer lets us do that cleanly. v2: Drop "dev" argument. Signed-off-by: Eric Anholt Acked-by: Daniel Vetter Reviewed-by: Boris Brezillon Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/20170511183128.25085-2-eric@anholt.net

drm/vc4: Enable selection in Kconfig on any 32-bit BCM platform.

2017-05-16T16:42:20+00:00

With the Cygnus port, we needed to add at least "|| ARCH_BCM_CYGNUS" to let the module get built on a cygnus-only kernel. However, I anticipate having a port for Kona soon, so just present the module on all of BCM. v2: Keep allowing selection with ARCH_BCM2835, since ARCH_BCM doesn't exist on arm64. Signed-off-by: Eric Anholt Acked-by: Daniel Vetter (v1) Acked-by: Scott Branden Acked-by: Florian Fainelli Link: http://patchwork.freedesktop.org/patch/msgid/20170509181539.30278-1-eric@anholt.net

drm/vc4: Add HDMI audio support

2017-03-16T17:33:30+00:00

The HDMI encoder IP embeds all needed blocks to output audio, with a custom DAI called MAI moving audio between the two parts of the HDMI core. This driver now exposes a sound card to let users stream audio to their display. Using the hdmi-codec driver has been considered here, but MAI meant having to significantly rework hdmi-codec, and it would have left little shared code with the I2S mode anyway. The encoder requires that the audio be SPDIF-formatted frames only, which alsalib will format-convert for us. This patch is the combined work of Eric Anholt (initial register setup with a separate dmaengine driver and using simple-audio-card) and Boris Brezillon (moving it all into HDMI, massive debug to get it actually working), and which Eric has the permission to release. v2: Drop "-audio" from sound card name, since that's already implied (suggestion by Boris) Signed-off-by: Eric Anholt Acked-by: Boris Brezillon Link: http://patchwork.freedesktop.org/patch/msgid/20170227202803.12855-2-eric@anholt.net

drm/vc4: Add DSI driver

2017-02-01T20:51:23+00:00

The DSI0 and DSI1 blocks on the 2835 are related hardware blocks. Some registers move around, and the featureset is slightly different, as DSI1 (the 4-lane DSI) is a later version of the hardware block. This driver doesn't yet enable DSI0, since we don't have any hardware to test against, but it does put a lot of the register definitions and code in place. v2: Use the clk_hw interfaces, don't set CLK_IS_BASIC (from review by Stephen Boyd) Signed-off-by: Eric Anholt Acked-by: Daniel Vetter (v1) Link: http://patchwork.freedesktop.org/patch/msgid/20170131192912.11316-1-eric@anholt.net

drm/vc4: Add DPI driver

2016-04-14T19:22:53+00:00

The DPI interface involves taking a ton of our GPIOs to be used as outputs, and routing display signals over them in parallel. v2: Use display_info.bus_formats[] to replace our custom DT properties. v3: Rebase on V3D documentation changes. v4: Fix rebase detritus from V3D documentation changes. Signed-off-by: Eric Anholt Acked-by: Rob Herring

dma-mapping: always provide the dma_map_ops based implementation

2016-01-21T01:09:18+00:00

Move the generic implementation to now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig Cc: "David S. Miller" Cc: Aurelien Jacquiot Cc: Chris Metcalf Cc: David Howells Cc: Geert Uytterhoeven Cc: Haavard Skinnemoen Cc: Hans-Christian Egtvedt Cc: Helge Deller Cc: James Hogan Cc: Jesper Nilsson Cc: Koichi Yasutake Cc: Ley Foon Tan Cc: Mark Salter Cc: Mikael Starvik Cc: Steven Miao Cc: Vineet Gupta Cc: Christian Borntraeger Cc: Joerg Roedel Cc: Sebastian Ott Signed-off-by: Valentin Rothberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

drm/vc4: Add dependency on HAVE_DMA_ATTRS, and select DRM_GEM_CMA_HELPER

2015-11-09T22:25:27+00:00

Avoid the following build errors, seen with m68k:allmodconfig and other architectures which do not support HAVE_DMA_ATTRS. ERROR: "drm_gem_cma_create" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_mmap" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_get_sg_table" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_vm_ops" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_mmap" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_vunmap" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_import_sg_table" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_free_object" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_vmap" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_dumb_map_offset" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_create" [drivers/gpu/drm/drm_kms_helper.ko] undefined! ERROR: "drm_gem_cma_describe" [drivers/gpu/drm/drm_kms_helper.ko] undefined! ERROR: "drm_gem_cma_free_object" [drivers/gpu/drm/drm_kms_helper.ko] undefined! Acked-by: Eric Anholt Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.") Signed-off-by: Guenter Roeck Signed-off-by: Dave Airlie