kernel/linux.git/drivers/gpu/drm/udl, branch v5.16.18

drm/udl: fix control-message timeout

2021-11-05T10:15:14+00:00

USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)") Cc: stable@vger.kernel.org # 3.4 Signed-off-by: Johan Hovold Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20211025115353.5089-1-johan@kernel.org

drm/shmem-helper: Switch to vmf_insert_pfn

2021-08-12T19:41:10+00:00

We want to stop gup, which isn't the case if we use vmf_insert_page and VM_MIXEDMAP, because that does not set pte_special. The motivation here is to stop get_user_pages from working on buffer object mmaps in general. Quoting some discussion with Thomas: On Thu, Jul 22, 2021 at 08:22:43PM +0200, Thomas Zimmermann wrote: > Am 13.07.21 um 22:51 schrieb Daniel Vetter: > > We want to stop gup, which isn't the case if we use vmf_insert_page > > What is gup? get_user_pages. It pins memory wherever it is, which badly wreaks at least ttm and could also cause trouble with cma allocations. In both cases becaue we can't move/reuse these pages anymore. Now get_user_pages fails when the memory isn't considered "normal", like with VM_PFNMAP and using vm_insert_pfn. For consistency across all dma-buf I'm trying (together with Christian König) to roll this out everywhere, for fewer surprises. E.g. for 5.14 iirc we merged a patch to do the same for ttm, where it closes an actual bug (ttm gets really badly confused when there's suddenly pinned pages where it thought it can move them). cma allcoations already use VM_PFNMAP (because that's what dma_mmap is using underneath), as is anything that's using remap_pfn_range. Worst case we have to revert this patch for shmem helpers if it breaks something, but I hope that's not the case. On the ttm side we've also had some fallout that we needed to paper over with clever tricks. v2: With this shmem gem helpers now definitely need CONFIG_MMU (0day) v3: add more depends on MMU. For usb drivers this is a bit awkward, but really it's correct: To be able to provide a contig mapping of buffers to userspace on !MMU platforms we'd need to use the cma helpers for these drivers on those platforms. As-is this wont work. Also not exactly sure why vm_insert_page doesn't go boom, because that definitely wont fly in practice since the pages are non-contig to begin with. v4: Explain the entire motivation a lot more (Thomas) Acked-by: Thomas Zimmermann Signed-off-by: Daniel Vetter Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Thomas Zimmermann Cc: David Airlie Cc: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20210812131412.2487363-2-daniel.vetter@ffwll.ch

drm/udl: Use offset-adjusted shadow-plane mapping

2021-08-08T18:27:44+00:00

For framebuffers with non-zero offset fields, shadow-plane helpers provide a pointer to the first byte of the contained data. Use it in udl. Signed-off-by: Thomas Zimmermann Acked-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-10-tzimmermann@suse.de

drm/udl: Use framebuffer dma-buf helpers

2021-07-23T18:17:42+00:00

Replace dma_buf_begin_cpu_access() with drm_gem_fb_begin_cpu_access(); same for _end_cpu_access(). Remove some boiler-plate code. No functional changes. Signed-off-by: Thomas Zimmermann Reviewed-by: Noralf Trønnes Acked-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20210716140801.1215-3-tzimmermann@suse.de

Merge tag 'drm-misc-next-2021-03-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2021-03-16T07:08:46+00:00

drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie From: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour

drm: Use USB controller's DMA mask when importing dmabufs

2021-03-11T10:11:33+00:00

USB devices cannot perform DMA and hence have no dma_mask set in their device structure. Therefore importing dmabuf into a USB-based driver fails, which breaks joining and mirroring of display in X11. For USB devices, pick the associated USB controller as attachment device. This allows the DRM import helpers to perform the DMA setup. If the DMA controller does not support DMA transfers, we're out of luck and cannot import. Our current USB-based DRM drivers don't use DMA, so the actual DMA device is not important. Tested by joining/mirroring displays of udl and radeon under Gnome/X11. v8: * release dmadev if device initialization fails (Noralf) * fix commit description (Noralf) v7: * fix use-before-init bug in gm12u320 (Dan) v6: * implement workaround in DRM drivers and hold reference to DMA device while USB device is in use * remove dev_is_usb() (Greg) * collapse USB helper into usb_intf_get_dma_device() (Alan) * integrate Daniel's TODO statement (Daniel) * fix typos (Greg) v5: * provide a helper for USB interfaces (Alan) * add FIXME item to documentation and TODO list (Daniel) v4: * implement workaround with USB helper functions (Greg) * use struct usb_device->bus->sysdev as DMA device (Takashi) v3: * drop gem_create_object * use DMA mask of USB controller, if any (Daniel, Christian, Noralf) v2: * move fix to importer side (Christian, Daniel) * update SHMEM and CMA helpers for new PRIME callbacks Signed-off-by: Thomas Zimmermann Fixes: 6eb0233ec2d0 ("usb: don't inherity DMA properties for USB devices") Tested-by: Pavel Machek Reviewed-by: Greg Kroah-Hartman Acked-by: Christian König Acked-by: Daniel Vetter Acked-by: Noralf Trønnes Cc: Christoph Hellwig Cc: Greg Kroah-Hartman Cc: # v5.10+ Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20210303133229.3288-1-tzimmermann@suse.de Signed-off-by: Maarten Lankhorst

drm/udl: Move vmap out of commit tail

2021-02-08T12:00:51+00:00

Vmap operations may acquire the dmabuf reservation lock, which is not allowed within atomic commit-tail functions. Therefore move vmap and vunmap from the damage handler into prepare_fb and cleanup_fb callbacks. The mapping is provided as GEM shadow-buffered plane. The functions in the commit tail use the pre-established mapping for damage handling. Signed-off-by: Thomas Zimmermann Tested-by: Gerd Hoffmann Acked-by: Gerd Hoffmann Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-8-tzimmermann@suse.de

drm/shmem-helper: Removed drm_gem_shmem_create_object_cached()

2020-11-24T08:10:33+00:00

Cached page mappings are now the default for SHMEM GEM objects. Remove the obsolete create function for cached mappings. Signed-off-by: Thomas Zimmermann Acked-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20201117133156.26822-3-tzimmermann@suse.de

drm/udl: Fix missing error code in udl_handle_damage()

2020-11-13T14:03:48+00:00

If udl_get_urb() fails then this should return a negative error code but currently it returns success. Fixes: 798ce3fe1c3a ("drm/udl: Begin/end access to imported buffers in damage-handler") Signed-off-by: Dan Carpenter Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20201113101502.GD168908@mwanda

drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends

2020-11-09T08:19:24+00:00

This patch replaces the vmap/vunmap's use of raw pointers in GEM object functions with instances of struct dma_buf_map. GEM backends are converted as well. For most of them, this simply changes the returned type. TTM-based drivers now return information about the location of the memory, either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap() et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of implementing their own vmap callbacks. v7: * init QXL cursor to mapped BO buffer (kernel test robot) v5: * update vkms after switch to shmem v4: * use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian) * fix a trailing { in drm_gem_vmap() * remove several empty functions instead of converting them (Daniel) * comment uses of raw pointers with a TODO (Daniel) * TODO list: convert more helpers to use struct dma_buf_map Signed-off-by: Thomas Zimmermann Acked-by: Christian König Tested-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-7-tzimmermann@suse.de