kernel/linux.git/drivers/gpu/drm/ttm, branch v6.13.6

drm/ttm: Move pinned objects off LRU lists when pinning

2024-10-09T11:41:30+00:00

The ttm_bo_pin() and ttm_bo_unpin() functions weren't moving their resources off the LRU list to the unevictable list. Make sure that happens so that pinned objects don't accidently linger on the LRU lists, and also make sure to move them back once they are unpinned. v2: - Removing from a bulk move must be done with the pin-count still zero. v3: - ttm_resource_move_to_lru_tail must be done after pinning with a non- NULL resource (Intel CI). v6: - Use a TAB instead of space (checkpatch.pl error). Cc: Christian König Cc: Matthew Brost Cc: Signed-off-by: Thomas Hellström Reviewed-by: Christian König Link: https://patchwork.freedesktop.org/patch/msgid/20240911121859.85387-3-thomas.hellstrom@linux.intel.com

drm/ttm: Move swapped objects off the manager's LRU list

2024-10-09T11:41:30+00:00

Resources of swapped objects remains on the TTM_PL_SYSTEM manager's LRU list, which is bad for the LRU walk efficiency. Rename the device-wide "pinned" list to "unevictable" and move also resources of swapped-out objects to that list. An alternative would be to create an "UNEVICTABLE" priority to be able to keep the pinned- and swapped objects on their respective manager's LRU without affecting the LRU walk efficiency. v2: - Remove a bogus WARN_ON (Christian König) - Update ttm_resource_[add|del] bulk move (Christian König) - Fix TTM KUNIT tests (Intel CI) v3: - Check for non-NULL bo->resource in ttm_bo_populate(). v4: - Don't move to LRU tail during swapout until the resource is properly swapped or there was a swapout failure. (Intel Ci) - Add a newline after checkpatch check. v5: - Introduce ttm_resource_is_swapped() to avoid a corner-case where a newly created resource was considered swapped. (Intel CI) v6: - Move an assert. Cc: Christian König Cc: Matthew Brost Cc: Signed-off-by: Thomas Hellström Reviewed-by: Christian König Link: https://patchwork.freedesktop.org/patch/msgid/20240911121859.85387-2-thomas.hellstrom@linux.intel.com

Merge tag 'drm-misc-next-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

2024-08-08T16:58:46+00:00

drm-misc-next for v6.12: UAPI Changes: virtio: - Define DRM capset Cross-subsystem Changes: dma-buf: - heaps: Clean up documentation printk: - Pass description to kmsg_dump() Core Changes: CI: - Update IGT tests - Point upstream repo to GitLab instance modesetting: - Introduce Power Saving Policy property for connectors - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support panic: - Avoid build-time interference with framebuffer console docs: - Document Colorspace property scheduler: - Remove full_recover from drm_sched_start TTM: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory Driver Changes: amdgpu: - Support Power Saving Policy connector property ast: - astdp: Support AST2600 with VGA; Clean up HPD bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable gma500: - Update i2c terminology ivpu: - Add MODULE_FIRMWARE() lcdif: - Fix pixel clock loongson: - Use GEM refcount over TTM's mgag200: - Improve BMC handling - Support VBLANK intterupts nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's panel: - Shutdown fixes plus documentation - Refactor several drivers for better code sharing - boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus DT; Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor for code sharing sti: - Fix module owner stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: Fix transparency after disabling plane; Remove unused interrupt tegra: - Call drm_atomic_helper_shutdown() v3d: - Clean up perfmon vkms: - Clean up Signed-off-by: Daniel Vetter From: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20240801121406.GA102996@linux.fritz.box

drm/ttm: Allow direct reclaim to allocate local memory v2

2024-07-23T07:52:23+00:00

Limiting the allocation of higher order pages to the closest NUMA node and enabling direct memory reclaim provides not only failsafe against situations when memory becomes too much fragmented and the allocator is not able to satisfy the request from the local node but falls back to remote pages (HUGEPAGE) but also offers performance improvement. Accessing remote pages suffers due to bandwidth limitations and could be avoided if memory becomes defragmented and in most cases without using manual compaction. (/proc/sys/vm/compact_memory) Note: On certain distros such as RHEL, the proactive compaction is disabled. (https://tinyurl.com/4f32f7rs) v2 (chk): drop __GFP_RECLAIM since that is already set by GFP_USER Cc: Dave Airlie Cc: Vlastimil Babka Cc: Daniel Vetter Reviewed-by: Christian König Signed-off-by: Rajneesh Bhardwaj Link: https://patchwork.freedesktop.org/patch/msgid/20240708160636.1147308-1-rajneesh.bhardwaj@amd.com Signed-off-by: Christian König

Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel

2024-07-18T16:34:02+00:00

Pull drm updates from Dave Airlie: "There's a lot of stuff in here, amd, i915 and xe have new platform work, lots of core rework around EDID handling, some new COMPILE_TEST options, maintainer changes and a lots of other stuff. Summary: core: - deprecate DRM data and return 0 date - connector: Create a set of helpers to help with HDMI support - Remove driver owner assignments - Allow more drivers to compile with COMPILE_TEST - Conversions to drm_edid - Sprinkle MODULE_DESCRIPTIONS everywhere they are missing - Remove drm_mm_replace_node - print: Add a drm prefix to warn level messages too, remove ___drm_dbg, consolidate prefix handling - New monochrome TV mode variant ttm: - improve number of page faults on some platforms - fix test builds under PREEMPT_RT - more test coverage ci: - Require a more recent version of mesa - improve farm setup and test generation dma-buf: - warn if reserving 0 fence slots - internal API heap enhancements fbdev: - Create memory manager optimized fbdev emulation panic: - Allow to select fonts - improve drm_fb_dma_get_scanout_buffer - Allow to dump kmsg to the screen bridge: - Remove redundant checks on bridge->encoder - Remove drm_bridge_chain_mode_fixup - bridge-connector: Plumb in the new HDMI helper - analogix_dp: Various improvements, handle AUX transfers timeout - samsung-dsim: Fix timings calculation - tc358767: Plenty of small fixes, fix no connector attach, fix clocks - sii902x: state validation improvements panels: - Switch panels from register table initialization to proper code - Now that the panel code tracks the panel state, remove every ad-hoc implementation in the panel drivers - More cleanup of prepare / enable state tracking in drivers - edp: Drop legacy panel compatibles - simple-bridge: Switch to devm_drm_bridge_add - New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology 13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4, Lincoln Technologies LCD197, Ortustech COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti amdgpu: - DCN 4.0.x support - GC 12.0 support - GMC 12.0 support - SDMA 7.0 support - MES12 support - MMHUB 4.1 support - GFX12 modifier and DCC support - lots of IP fixes/updates amdkfd: - Contiguous VRAM allocations - GC 12.0 support - SDMA 7.0 support - SR-IOV fixes - KFD GFX ALU exceptions i915: - Battlemage Xe2 HPD display enablement - Panel Replay enabling - DP AUX-less ALPM/LOBF - Enable link training failure fallback for DP MST links - CMRR (Content Match Refresh Rate) enabling - Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps - Enable eDP AUX based HDR backlight - Support replaying GPU hangs with captured context image - Automate CCS Mode setting during engine resets - lots of refactoring - Support replaying GPU hangs with captured context image - Increase FLR timeout from 3s to 9s - Enable w/a 16021333562 for DG2, MTL and ARL [guc] xe: - update MAINATINERS - New uapi adding OA functionality to Xe - expose l3 bank mask - fix display detect on ADL-N - runtime PM Fixes - Fix silent backmerge issues - More prep for SR-IOV - HWmon additions - per client usage info - Rework GPU page fault handling - Drop EXEC_QUEUE_FLAG_BANNED - Add BMG PCI IDs - Scheduler fixes and improvements - Rename xe_exec_queue::compute to xe_exec_queue::lr - Use ttm_uncached for BO with NEEDS_UC flag - Rename xe perf layer as xe observation layer - lots of refactoring radeon: - Backlight workaround for iMac - Silence UBSAN flex array warnings msm: - Validate registers XML description against schema in CI - core/dpu: SM7150 support - mdp5: Add support for MSM8937 - gpu: Add param for userspace to know if raytracing is supported - gpu: X185 support (aka gpu in X1 laptop chips) - gpu: a505 support ivpu: - hardware scheduler support - profiling support - improvements to the platform support layer - firmware handling improvements - clocks/power mgmt improvements - scheduler/logging improvements habanalabs: - Gradual sleep in polling memory macro - Reduce Gaudi2 MSI-X interrupt count to 128 - Add Gaudi2-D revision support - Add timestamp to CPLD info - Gaudi2: Assume hard-reset by firmware upon MC SEI severe error - Align Gaudi2 interrupt names - Check for errors after preboot is ready - Change habanalabs maintainer and git repo path mgag200: - refactoring and improvements - Add BMC output - enable polling nouveau: - add registry command line v3d: - perf counters improvements zynqmp: - irq and debugfs improvements atmel-hlcdc: - Support XLCDC in sam9x7 mipi-dbi: - Remove mipi_dbi_machine_little_endian - make SPI bits per word configurable - support RGB888 - allow pixel formats to be specified in the DT sun4i: - Rework the blender setup for DE2 panfrost: - Enable MT8188 support vc4: - Monochrome TV support exynos: - fix fallback mode regression - fix memory leak - Use drm_edid_duplicate() instead of kmemdup() etnaviv: - fix i.MX8MP NPU clock gating - workaround FE register cdc issues on some cores - fix DMA sync handling for cached buffers - fix job timeout handling - keep TS enabled on MMUv2 cores for improved performance mediatek: - Convert to platform remove callback returning void- - Drop chain_mode_fixup call in mode_valid() - Fixes the errors of MediaTek display driver found by IGT - Add display support for the MT8365-EVK board - Fix bit depth overwritten for mtk_ovl_set bit_depth() - Fix possible_crtcs calculation - Fix spurious kfree() ast: - refactor mode setting code stm: - Add LVDS support - DSI PHY updates" * tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits) drm/amdgpu/mes12: add missing opcode string drm/amdgpu/mes11: update opcode strings Revert "drm/amd/display: Reset freesync config before update new state" drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB drm/xe: Drop trace_xe_hw_fence_free drm/xe/uapi: Rename xe perf layer as xe observation layer drm/amdgpu: remove exp hw support check for gfx12 drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed drm/amdgpu: flush all cached ras bad pages to eeprom drm/amdgpu: select compute ME engines dynamically drm/amd/display: Allow display DCC for DCN401 drm/amdgpu: select compute ME engines dynamically drm/amdgpu/job: Replace DRM_INFO/ERROR logging drm/amdgpu: select compute ME engines dynamically drm/amd/pm: Ignore initial value in smu response register drm/amdgpu: Initialize VF partition mode drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping MAINTAINERS: fix Xinhui's name MAINTAINERS: update powerplay and swsmu drm/qxl: Pin buffer objects for internal mappings ...

drm/ttm: Use the LRU walker for eviction

2024-07-09T10:42:18+00:00

Use the LRU walker for eviction. This helps removing a lot of code with weird locking semantics. The functionality is slightly changed so that when trylocked buffer objects are exhausted, we continue to interleave walks with ticket-locks while there is still progress made. The list walks are not restarted in-between evictions. Also provide a separate ttm_bo_evict_first() function for its single user. The context of that user allows sleeping dma_resv locks. v6: - Various cleanups suggested by Matthew Brost. - Fix error return code of ttm_bo_evict_first(). (Matthew Brost) - Fix an error check that was inverted. (Matthew Brost) v7: - Use s64 rather than long (Christian König) - Early ttm_resource_cursor_fini() in ttm_bo_evict_first(). - Simplify check for bo_moved in ttm_bo_evict_first(). (Christian König) - Don't evict pinned bos. Cc: Christian König Cc: Somalapuram Amaranath Cc: Matthew Brost Cc: Signed-off-by: Thomas Hellström Reviewed-by: Matthew Brost #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-8-thomas.hellstrom@linux.intel.com Signed-off-by: Christian König

drm/ttm: Use the LRU walker helper for swapping

2024-07-09T10:41:46+00:00

Rework the TTM swapping to use the LRU walker helper. This helps fixing up the ttm_bo_swapout() interface to be consistent about not requiring any locking. For now mimic the current behaviour of using trylock only. We could be using ticket-locks here but defer that until it's deemed necessary. The TTM swapout functionality is a bit weird anyway since it alternates between memory types without exhausting TTM_PL_SYSTEM first. Intentionally keep pages as the unit of progress since changing that to bytes is an unrelated change that can be done later. v6: - Improve on error code translation in the swapout callback (Matthew Brost). v7: - Use s64 rather than long. - Remove ttm_resource_cursor_fini() since it's no longer used. - Rename ttm_resource_cursor_fini_locked() to ttm_resource_cursor_fini(). - Don't swap out pinned bos. Cc: Christian König Cc: Somalapuram Amaranath Cc: Matthew Brost Cc: Signed-off-by: Thomas Hellström Reviewed-by: Matthew Brost #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-7-thomas.hellstrom@linux.intel.com Signed-off-by: Christian König

drm/ttm: Provide a generic LRU walker helper

2024-07-09T10:40:04+00:00

Provide a generic LRU walker in TTM, in the spirit of drm_gem_lru_scan() but building on the restartable TTM LRU functionality. The LRU walker optionally supports locking objects as part of a ww mutex locking transaction, to mimic to some extent the current functionality in ttm. However any -EDEADLK return is converted to -ENOSPC and then to -ENOMEM before reaching the driver, so that the driver will need to backoff and possibly retry without being able to keep the ticket. v3: - Move the helper to core ttm. - Remove the drm_exec usage from it for now, it will be reintroduced later in the series. v4: - Handle the -EALREADY case if ticketlocking. v6: - Some cleanup and added code comments (Matthew Brost) - Clarified the ticketlock in the commit message (Matthew Brost) v7: - Use s64 rather than long for the target and progress (Christian König) - Update documentation to not encourage using pages as a progress measure. (Christian König) - Remove cond_resched(). (Christian König) Cc: Christian König Cc: Somalapuram Amaranath Cc: Matthew Brost Cc: Signed-off-by: Thomas Hellström Reviewed-by: Matthew Brost #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-6-thomas.hellstrom@linux.intel.com Signed-off-by: Christian König

drm/ttm, drm/amdgpu, drm/xe: Consider hitch moves within bulk sublist moves

2024-07-09T10:39:33+00:00

To address the problem with hitches moving when bulk move sublists are lru-bumped, register the list cursors with the ttm_lru_bulk_move structure when traversing its list, and when lru-bumping the list, move the cursor hitch to the tail. This also means it's mandatory for drivers to call ttm_lru_bulk_move_init() and ttm_lru_bulk_move_fini() when initializing and finalizing the bulk move structure, so add those calls to the amdgpu- and xe driver. Compared to v1 this is slightly more code but less fragile and hopefully easier to understand. Changes in previous series: - Completely rework the functionality - Avoid a NULL pointer dereference assigning manager->mem_type - Remove some leftover code causing build problems v2: - For hitch bulk tail moves, store the mem_type in the cursor instead of with the manager. v3: - Remove leftover mem_type member from change in v2. v6: - Add some lockdep asserts (Matthew Brost) - Avoid NULL pointer dereference (Matthew Brost) - No need to check bo->resource before dereferencing bo->bulk_move (Matthew Brost) Cc: Christian König Cc: Somalapuram Amaranath Cc: Matthew Brost Cc: Signed-off-by: Thomas Hellström Reviewed-by: Matthew Brost Acked-by: Christian König Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-5-thomas.hellstrom@linux.intel.com Signed-off-by: Christian König

drm/ttm: Use LRU hitches

2024-07-09T10:38:23+00:00

Have iterators insert themselves into the list they are iterating over using hitch list nodes. Since only the iterator owner can remove these list nodes from the list, it's safe to unlock the list and when continuing, use them as a starting point. Due to the way LRU bumping works in TTM, newly added items will not be missed, and bumped items will be iterated over a second time before reaching the end of the list. The exception is list with bulk move sublists. When bumping a sublist, a hitch that is part of that sublist will also be moved and we might miss items if restarting from it. This will be addressed in a later patch. Changes in previous series: - Updated ttm_resource_cursor_fini() documentation. v2: - Don't reorder ttm_resource_manager_first() and _next(). (Christian König). - Use list_add instead of list_move (Christian König) v3: - Split into two patches, one cleanup, one new functionality (Christian König) - use ttm_resource_cursor_fini_locked() instead of open-coding (Matthew Brost) Cc: Christian König Cc: Somalapuram Amaranath Cc: Matthew Brost Cc: Signed-off-by: Thomas Hellström Reviewed-by: Matthew Brost Reviewed-by: Christian König Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-4-thomas.hellstrom@linux.intel.com Signed-off-by: Christian König