kernel/linux.git/drivers/gpu/drm/tiny, branch v6.12.80

drm/sitronix/st7586: fix bad pixel data due to byte swap

2026-03-25T10:08:27+00:00

[ Upstream commit 46d8a07b4ae262e2fec6ce2aa454e06243661265 ] Correctly set dbi->write_memory_bpw for the ST7586 driver. This driver is for a monochrome display that has an unusual data format, so the default value set in mipi_dbi_spi_init() is not correct simply because this controller is non-standard. Previously, we were using dbi->swap_bytes to make the same sort of workaround, but it was removed in the same commit that added dbi->write_memory_bpw, so we need to use the latter now to have the correct behavior. This fixes every 3 columns of pixels being swapped on the display. There are 3 pixels per byte, so the byte swap caused this effect. Fixes: df3fb27a74a4 ("drm/mipi-dbi: Make bits per word configurable for pixel transfers") Acked-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Signed-off-by: David Lechner Link: https://patch.msgid.link/20260228-drm-mipi-dbi-fix-st7586-byte-swap-v1-1-e78f6c24cd28@baylibre.com Signed-off-by: Sasha Levin

drm/simpledrm: Do not upcast in release helpers

2025-07-10T14:05:04+00:00

[ Upstream commit d231cde7c84359fb18fb268cf6cff03b5bce48ff ] The res pointer passed to simpledrm_device_release_clocks() and simpledrm_device_release_regulators() points to an instance of struct simpledrm_device. No need to upcast from struct drm_device. The upcast is harmless, as DRM device is the first field in struct simpledrm_device. Signed-off-by: Thomas Zimmermann Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Cc: # v5.14+ Reviewed-by: Javier Martinez Canillas Reviewed-by: Jocelyn Falempe Link: https://lore.kernel.org/r/20250407134753.985925-2-tzimmermann@suse.de Signed-off-by: Sasha Levin

drm/cirrus-qemu: Fix pitch programming

2025-07-06T09:01:44+00:00

commit 4bfb389a0136a13f0802eeb5e97a0e76d88f77ae upstream. Do not set CR1B[6] when programming the pitch. The bit effects VGA text mode and is not interpreted by qemu. [1] It has no affect on the scanline pitch. The scanline bit that is set into CR1B[6] belongs into CR13[7], which the driver sets up correctly. This bug goes back to the driver's initial commit. Signed-off-by: Thomas Zimmermann Acked-by: Gerd Hoffmann Link: https://gitlab.com/qemu-project/qemu/-/blob/stable-9.2/hw/display/cirrus_vga.c?ref_type=heads#L1112 # 1 Fixes: f9aa76a85248 ("drm/kms: driver for virtual cirrus under qemu") Cc: Adam Jackson Cc: Dave Airlie Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Thomas Zimmermann Cc: # v3.5+ Link: https://lore.kernel.org/r/20250328091821.195061-2-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman

drm/tiny: panel-mipi-dbi: Use drm_client_setup_with_fourcc()

2025-05-22T12:29:53+00:00

commit 9c1798259b9420f38f1fa1b83e3d864c3eb1a83e upstream. Since commit 559358282e5b ("drm/fb-helper: Don't use the preferred depth for the BPP default"), RGB565 displays such as the CFAF240320X no longer render correctly: colors are distorted and the content is shown twice horizontally. This regression is due to the fbdev emulation layer defaulting to 32 bits per pixel, whereas the display expects 16 bpp (RGB565). As a result, the framebuffer data is incorrectly interpreted by the panel. Fix the issue by calling drm_client_setup_with_fourcc() with a format explicitly selected based on the display's bits-per-pixel value. For 16 bpp, use DRM_FORMAT_RGB565; for other values, fall back to the previous behavior. This ensures that the allocated framebuffer format matches the hardware expectations, avoiding color and layout corruption. Tested on a CFAF240320X display with an RGB565 configuration, confirming correct colors and layout after applying this patch. Cc: stable@vger.kernel.org Fixes: 559358282e5b ("drm/fb-helper: Don't use the preferred depth for the BPP default") Signed-off-by: Fabio Estevam Reviewed-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Signed-off-by: Thomas Zimmermann Link: https://lore.kernel.org/r/20250417103458.2496790-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman

drm/panel-mipi-dbi: Run DRM default client setup

2025-05-22T12:29:53+00:00

commit 1b0caa5f5ac20bcaf82fc89a5c849b21ce3bfdf6 upstream. Call drm_client_setup() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. v5: - select DRM_CLIENT_SELECTION Signed-off-by: Thomas Zimmermann Cc: "Noralf Trønnes" Acked-by: Noralf Trønnes Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-32-tzimmermann@suse.de Signed-off-by: Fabio Estevam Signed-off-by: Greg Kroah-Hartman

drm/repaper: fix integer overflows in repeat functions

2025-04-25T08:47:57+00:00

commit 4d098000ac193f359e6b8ca4801dbdbd6a27b41f upstream. There are conditions, albeit somewhat unlikely, under which right hand expressions, calculating the end of time period in functions like repaper_frame_fixed_repeat(), may overflow. For instance, if 'factor10x' in repaper_get_temperature() is high enough (170), as is 'epd->stage_time' in repaper_probe(), then the resulting value of 'end' will not fit in unsigned int expression. Mitigate this by casting 'epd->factored_stage_time' to wider type before any multiplication is done. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 3589211e9b03 ("drm/tinydrm: Add RePaper e-ink driver") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich Signed-off-by: Alex Lanzano Link: https://patchwork.freedesktop.org/patch/msgid/20250116134801.22067-1-n.zhandarovich@fintech.ru Signed-off-by: Greg Kroah-Hartman

drm/tiny/gm12u320: convert to struct drm_edid

2024-08-29T11:30:15+00:00

Prefer the struct drm_edid based functions for allocating the EDID and updating the connector. Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/c31c3afa883a3321345608c480c26161b638a83e.1724348429.git.jani.nikula@intel.com Signed-off-by: Jani Nikula

drm/tiny: add missing MODULE_DESCRIPTION() macros

2024-06-10T10:44:32+00:00

make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tiny/bochs.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tiny/cirrus.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tiny/gm12u320.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson Reviewed-by: Hans de Goede Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20240609-md-drivers-gpu-drm-tiny-v1-1-6905fe4ada50@quicinc.com

drm/tiny: panel-mipi-dbi: Support the pixel format property

2024-06-07T14:09:06+00:00

Add support for these pixel format property values: - r5g6b5, RGB565 - b6x2g6x2r6x2, BGR666 BGR666 is presented to userspace as RGB888. The 2 LSB in each color are discarded by the controller. The pixel is sent on the wire using 8 bits per word (little endian) so the controller sees it as BGR. RGB565 is the default if the property is not present. Reviewed-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240604-panel-mipi-dbi-rgb666-v4-5-d7c2bcb9b78d@tronnes.org Signed-off-by: Noralf Trønnes

drm/bochs: switch to struct drm_edid

2024-05-13T17:12:36+00:00

Prefer struct drm_edid based functions over struct edid. Signed-off-by: Jani Nikula Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/24536f4a1a12af7b43ba86e9761dfeef179b72df.1715347488.git.jani.nikula@intel.com