kernel/linux.git/drivers/gpu/drm/tiny/st7586.c, branch v5.19

spi: make remove callback a void function

2022-02-09T13:00:45+00:00

The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König Acked-by: Marc Kleine-Budde Acked-by: Andy Shevchenko Reviewed-by: Geert Uytterhoeven Acked-by: Jérôme Pouiller Acked-by: Miquel Raynal Acked-by: Jonathan Cameron Acked-by: Claudius Heine Acked-by: Stefan Schmidt Acked-by: Alexandre Belloni Acked-by: Ulf Hansson # For MMC Acked-by: Marcus Folkesson Acked-by: Łukasz Stelmach Acked-by: Lee Jones Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown

drm/format-helper: Rework format-helper conversion functions

2021-11-11T11:06:57+00:00

Move destination-buffer clipping from all format-helper conversion functions into callers. Support destination-buffer pitch. Only distinguish between system and I/O memory, but use same logic everywhere. Simply harmonize the interface and semantics of the existing code. Not all conversion helpers support all combinations of parameters. We have to add additional features when we need them. v2: * fix default destination pitch in drm_fb_xrgb8888_to_gray8() (Noralf) Signed-off-by: Thomas Zimmermann Tested-by: Noralf Trønnes Reviewed-by: Noralf Trønnes Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-5-tzimmermann@suse.de

drm/st7586: Use framebuffer dma-buf helpers

2021-07-23T18:18:14+00:00

Replace dma_buf_begin_cpu_access() with drm_gem_fb_begin_cpu_access(); same for _end_cpu_access(). Remove some boiler-plate code. No functional changes. Signed-off-by: Thomas Zimmermann Reviewed-by: Noralf Trønnes Acked-by: Daniel Vetter Acked-by: David Lechner Link: https://patchwork.freedesktop.org/patch/msgid/20210716140801.1215-8-tzimmermann@suse.de

drm/tiny: drm_gem_simple_display_pipe_prepare_fb is the default

2021-06-24T13:40:11+00:00

Goes through all the drivers and deletes the default hook since it's the default now. Acked-by: David Lechner Acked-by: Noralf Trønnes Acked-by: Oleksandr Andrushchenko Acked-by: Linus Walleij Signed-off-by: Daniel Vetter Cc: Joel Stanley Cc: Andrew Jeffery Cc: "Noralf Trønnes" Cc: Linus Walleij Cc: Emma Anholt Cc: David Lechner Cc: Kamlesh Gurudasani Cc: Oleksandr Andrushchenko Cc: Daniel Vetter Cc: Maxime Ripard Cc: Thomas Zimmermann Cc: Sam Ravnborg Cc: Alex Deucher Cc: Andy Shevchenko Cc: linux-aspeed@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-14-daniel.vetter@ffwll.ch

drm/st7586: Avoid spamming logs if probe is deferred

2021-04-27T11:13:56+00:00

The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by: Andy Shevchenko Signed-off-by: Noralf Trønnes Link: https://patchwork.freedesktop.org/patch/msgid/20210421163157.50949-2-andriy.shevchenko@linux.intel.com

drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpers

2021-02-23T07:54:22+00:00

The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting, but currently located next to framebuffer helpers. Move it to GEM atomic helpers, rename it slightly and adopt the drivers. Same for the rsp simple-pipe helper. Compile-tested with x86-64, aarch64 and arm. The patch is fairly large, but there are no functional changes. v3: * remove out-comented line in drm_gem_framebuffer_helper.h (Maxime) v2: * rename to drm_gem_plane_helper_prepare_fb() (Daniel) * add tutorial-style documentation Signed-off-by: Thomas Zimmermann Acked-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de

drm/: Constify struct drm_driver

2020-11-06T09:31:26+00:00

Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg Cc: kernel test robot Acked-by: Maxime Ripard Reviewed-by: Alex Deucher Signed-off-by: Daniel Vetter Cc: Sam Ravnborg Cc: Dave Airlie Cc: Gerd Hoffmann Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland Cc: Leo Li Cc: Alex Deucher Cc: Christian König Cc: Eric Anholt Cc: Maxime Ripard Cc: Ben Skeggs Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch

drm/mipi-dbi: Remove ->enabled

2020-06-24T07:17:34+00:00

The atomic helpers try really hard to not lose track of things, duplicating enabled tracking in the driver is at best confusing. Double-enabling or disabling is a bug in atomic helpers. In the fb_dirty function we can just assume that the fb always exists, simple display pipe helpers guarantee that the crtc is only enabled together with the output, so we always have a primary plane around. Now in the update function we need to be a notch more careful, since that can also get called when the crtc is off. And we don't want to upload frames when that's the case, so filter that out too. Reviewed-by: Noralf Trønnes Acked-by: David Lechner Reviewed-by: Emil Velikov Signed-off-by: Daniel Vetter Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Thomas Zimmermann Cc: David Airlie Cc: Daniel Vetter Cc: David Lechner Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-7-daniel.vetter@ffwll.ch

drm/cma-helper: Rework DRM_GEM_CMA_VMAP_DRIVER_OPS macro

2020-06-10T07:01:41+00:00

Rename the macro to DRM_GEM_CMA_DRIVER_OPS_VMAP to align naming with SHMEM helpers and drm_gem_cma_prime_import_sg_table_vmap(). An variant of the macro is provided for drivers that override the default .dumb_create callback. Adapt drivers to the changes. v3: * rename macro to signal implicit vmap on imported buffers v2: * provide DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE Signed-off-by: Thomas Zimmermann Reviewed-by: Sam Ravnborg Reviewed-by: Laurent Pinchart Reviewed-by: Emil Velikov Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-3-tzimmermann@suse.de

drm/st7586: Use devm_drm_dev_alloc

2020-04-28T13:44:10+00:00

Already using devm_drm_dev_init, so very simple replacment. Acked-by: David Lechner Acked-by: Sam Ravnborg Signed-off-by: Daniel Vetter Cc: David Lechner Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-15-daniel.vetter@ffwll.ch