kernel/linux.git/drivers/gpu/drm/tidss, branch v6.1.90

drm/tidss: Fix sync-lost issue with two displays

2024-03-26T22:20:50+00:00

[ Upstream commit c079e2e113f2ec2803ba859bbb442a6ab82c96bd ] A sync lost issue can be observed with two displays, when moving a plane from one disabled display to an another disabled display, and then enabling the display to which the plane was moved to. The exact requirements for this to trigger are not clear. It looks like the issue is that the layers are left enabled in the first display's OVR registers. Even if the corresponding VP is disabled, it still causes an issue, as if the disabled VP and its OVR would still be in use, leading to the same VID being used by two OVRs. However, this is just speculation based on testing the DSS behavior. Experimentation shows that as a workaround, we can disable all the layers in the OVR when disabling a VP. There should be no downside to this, as the OVR is anyway effectively disabled if its VP is disabled, and it seems to solve the sync lost issue. However, there may be a bigger issue in play here, related to J721e erratum i2097 ("DSS: Disabling a Layer Connected to Overlay May Result in Synclost During the Next Frame"). Experimentation also shows that the OVR's CHANNELIN field has similar issue. So we may need to revisit this when we find out more about the core issue. Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Reviewed-by: Aradhya Bhatia Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20240213-tidss-fixes-v1-2-d709e8dfa505@ideasonboard.com Signed-off-by: Sasha Levin

drm/tidss: Fix initial plane zpos values

2024-03-26T22:20:50+00:00

[ Upstream commit 3ec948ccb2c4b99e8fbfdd950adbe92ea577b395 ] When the driver sets up the zpos property it sets the default zpos value to the HW id of the plane. That is fine as such, but as on many DSS versions the driver arranges the DRM planes in a different order than the HW planes (to keep the non-scalable planes first), this leads to odd initial zpos values. An example is J721e, where the initial zpos values for DRM planes are 1, 3, 0, 2. In theory the userspace should configure the zpos values properly when using multiple planes, and in that sense the initial zpos values shouldn't matter, but there's really no reason not to fix this and help the userspace apps which don't handle zpos perfectly. In particular, some versions of Weston seem to have issues dealing with the planes with the current default zpos values. So let's change the zpos values for the DRM planes to 0, 1, 2, 3. Another option would be to configure the planes marked as primary planes to zpos 0. On a two display system this would give us plane zpos values of 0, 0, 1, 2. The end result and behavior would be very similar in this option, and I'm not aware that this would actually help us in any way. So, to keep the code simple, I opted for the 0, 1, 2, 3 values. Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Reviewed-by: Aradhya Bhatia Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20240213-tidss-fixes-v1-1-d709e8dfa505@ideasonboard.com Signed-off-by: Sasha Levin

drm/tidss: Fix atomic_flush check

2024-02-01T00:17:08+00:00

commit 95d4b471953411854f9c80b568da7fcf753f3801 upstream. tidss_crtc_atomic_flush() checks if the crtc is enabled, and if not, returns immediately as there's no reason to do any register changes. However, the code checks for 'crtc->state->enable', which does not reflect the actual HW state. We should instead look at the 'crtc->state->active' flag. This causes the tidss_crtc_atomic_flush() to proceed with the flush even if the active state is false, which then causes us to hit the WARN_ON(!crtc->state->event) check. Fix this by checking the active flag, and while at it, fix the related debug print which had "active" and "needs modeset" wrong way. Cc: Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Reviewed-by: Aradhya Bhatia Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-10-ac91b5ea35c0@ideasonboard.com Signed-off-by: Tomi Valkeinen Signed-off-by: Greg Kroah-Hartman

drm/tidss: Fix dss reset

2024-01-25T23:27:33+00:00

[ Upstream commit bc288a927815efcf9d7f4a54d4d89c5df478c635 ] The probe function calls dispc_softreset() before runtime PM is enabled and without enabling any of the DSS clocks. This happens to work by luck, and we need to make sure the DSS HW is active and the fclk is enabled. To fix the above, add a new function, dispc_init_hw(), which does: - pm_runtime_set_active() - clk_prepare_enable(fclk) - dispc_softreset(). This ensures that the reset can be successfully accomplished. Note that we use pm_runtime_set_active(), not the normal pm_runtime_get(). The reason for this is that at this point we haven't enabled the runtime PM yet and also we don't want the normal resume callback to be called: the dispc resume callback does some initial HW setup, and it expects that the HW was off (no video ports are streaming). If the bootloader has enabled the DSS and has set up a boot time splash-screen, the DSS would be enabled and streaming which might lead to issues with the normal resume callback. Fixes: c9b2d923befd ("drm/tidss: Soft Reset DISPC on startup") Reviewed-by: Aradhya Bhatia Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-8-ac91b5ea35c0@ideasonboard.com Signed-off-by: Tomi Valkeinen Signed-off-by: Sasha Levin

drm/tidss: Check for K2G in in dispc_softreset()

2024-01-25T23:27:33+00:00

[ Upstream commit 151825150cf9c2e9fb90763d35b9dff3783628ac ] K2G doesn't have softreset feature. Instead of having every caller of dispc_softreset() check for K2G, move the check into dispc_softreset(), and make dispc_softreset() return 0 in case of K2G. Reviewed-by: Laurent Pinchart Reviewed-by: Aradhya Bhatia Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-6-ac91b5ea35c0@ideasonboard.com Signed-off-by: Tomi Valkeinen Stable-dep-of: bc288a927815 ("drm/tidss: Fix dss reset") Signed-off-by: Sasha Levin

drm/tidss: Return error value from from softreset

2024-01-25T23:27:33+00:00

[ Upstream commit aceafbb5035c4bfc75a321863ed1e393d644d2d2 ] Return an error value from dispc_softreset() so that the caller can handle the errors. Reviewed-by: Aradhya Bhatia Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-5-ac91b5ea35c0@ideasonboard.com Signed-off-by: Tomi Valkeinen Stable-dep-of: bc288a927815 ("drm/tidss: Fix dss reset") Signed-off-by: Sasha Levin

drm/tidss: Move reset to the end of dispc_init()

2024-01-25T23:27:32+00:00

[ Upstream commit 36d1e0852680aa038e2428d450673390111b165c ] We do a DSS reset in the middle of the dispc_init(). While that happens to work now, we should really make sure that e..g the fclk, which is acquired only later in the function, is enabled when doing a reset. This will be handled in a later patch, but for now, let's move the dispc_softreset() call to the end of dispc_init(), which is a sensible place for it anyway. Reviewed-by: Laurent Pinchart Reviewed-by: Aradhya Bhatia Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-4-ac91b5ea35c0@ideasonboard.com Signed-off-by: Tomi Valkeinen Stable-dep-of: bc288a927815 ("drm/tidss: Fix dss reset") Signed-off-by: Sasha Levin

Revert "drm/tidss: Annotate dma-fence critical section in commit path"

2024-01-25T23:27:31+00:00

[ Upstream commit ca34d816558c3e4c3f8fe037b5a6b16c944693de ] This reverts commit 4d56a4f08391857ba93465de489707b66adad114. The DMA-fence annotations cause a lockdep warning (see below). As per https://patchwork.freedesktop.org/patch/462170/ it sounds like the annotations don't work correctly. ====================================================== WARNING: possible circular locking dependency detected 6.6.0-rc2+ #1 Not tainted ------------------------------------------------------ kmstest/733 is trying to acquire lock: ffff8000819377f0 (fs_reclaim){+.+.}-{0:0}, at: __kmem_cache_alloc_node+0x58/0x2d4 but task is already holding lock: ffff800081a06aa0 (dma_fence_map){++++}-{0:0}, at: tidss_atomic_commit_tail+0x20/0xc0 [tidss] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (dma_fence_map){++++}-{0:0}: __dma_fence_might_wait+0x5c/0xd0 dma_resv_lockdep+0x1a4/0x32c do_one_initcall+0x84/0x2fc kernel_init_freeable+0x28c/0x4c4 kernel_init+0x24/0x1dc ret_from_fork+0x10/0x20 -> #1 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x70/0xe4 __kmem_cache_alloc_node+0x58/0x2d4 kmalloc_trace+0x38/0x78 __kthread_create_worker+0x3c/0x150 kthread_create_worker+0x64/0x8c workqueue_init+0x1e8/0x2f0 kernel_init_freeable+0x11c/0x4c4 kernel_init+0x24/0x1dc ret_from_fork+0x10/0x20 -> #0 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x1370/0x20d8 lock_acquire+0x1e8/0x308 fs_reclaim_acquire+0xd0/0xe4 __kmem_cache_alloc_node+0x58/0x2d4 __kmalloc_node_track_caller+0x58/0xf0 kmemdup+0x34/0x60 regmap_bulk_write+0x64/0x2c0 tc358768_bridge_pre_enable+0x8c/0x12d0 [tc358768] drm_atomic_bridge_call_pre_enable+0x68/0x80 [drm] drm_atomic_bridge_chain_pre_enable+0x50/0x158 [drm] drm_atomic_helper_commit_modeset_enables+0x164/0x264 [drm_kms_helper] tidss_atomic_commit_tail+0x58/0xc0 [tidss] commit_tail+0xa0/0x188 [drm_kms_helper] drm_atomic_helper_commit+0x1a8/0x1c0 [drm_kms_helper] drm_atomic_commit+0xa8/0xe0 [drm] drm_mode_atomic_ioctl+0x9ec/0xc80 [drm] drm_ioctl_kernel+0xc4/0x170 [drm] drm_ioctl+0x234/0x4b0 [drm] drm_compat_ioctl+0x110/0x12c [drm] __arm64_compat_sys_ioctl+0x128/0x150 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc_compat+0x1c/0x38 el0_svc_compat+0x48/0xb4 el0t_32_sync_handler+0xb0/0x138 el0t_32_sync+0x194/0x198 other info that might help us debug this: Chain exists of: fs_reclaim --> mmu_notifier_invalidate_range_start --> dma_fence_map Possible unsafe locking scenario: CPU0 CPU1 ---- ---- rlock(dma_fence_map); lock(mmu_notifier_invalidate_range_start); lock(dma_fence_map); lock(fs_reclaim); *** DEADLOCK *** 3 locks held by kmstest/733: #0: ffff800082e5bba0 (crtc_ww_class_acquire){+.+.}-{0:0}, at: drm_mode_atomic_ioctl+0x118/0xc80 [drm] #1: ffff000004224c88 (crtc_ww_class_mutex){+.+.}-{3:3}, at: modeset_lock+0xdc/0x1a0 [drm] #2: ffff800081a06aa0 (dma_fence_map){++++}-{0:0}, at: tidss_atomic_commit_tail+0x20/0xc0 [tidss] stack backtrace: CPU: 0 PID: 733 Comm: kmstest Not tainted 6.6.0-rc2+ #1 Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT) Call trace: dump_backtrace+0x98/0x118 show_stack+0x18/0x24 dump_stack_lvl+0x60/0xac dump_stack+0x18/0x24 print_circular_bug+0x288/0x368 check_noncircular+0x168/0x17c __lock_acquire+0x1370/0x20d8 lock_acquire+0x1e8/0x308 fs_reclaim_acquire+0xd0/0xe4 __kmem_cache_alloc_node+0x58/0x2d4 __kmalloc_node_track_caller+0x58/0xf0 kmemdup+0x34/0x60 regmap_bulk_write+0x64/0x2c0 tc358768_bridge_pre_enable+0x8c/0x12d0 [tc358768] drm_atomic_bridge_call_pre_enable+0x68/0x80 [drm] drm_atomic_bridge_chain_pre_enable+0x50/0x158 [drm] drm_atomic_helper_commit_modeset_enables+0x164/0x264 [drm_kms_helper] tidss_atomic_commit_tail+0x58/0xc0 [tidss] commit_tail+0xa0/0x188 [drm_kms_helper] drm_atomic_helper_commit+0x1a8/0x1c0 [drm_kms_helper] drm_atomic_commit+0xa8/0xe0 [drm] drm_mode_atomic_ioctl+0x9ec/0xc80 [drm] drm_ioctl_kernel+0xc4/0x170 [drm] drm_ioctl+0x234/0x4b0 [drm] drm_compat_ioctl+0x110/0x12c [drm] __arm64_compat_sys_ioctl+0x128/0x150 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc_compat+0x1c/0x38 el0_svc_compat+0x48/0xb4 el0t_32_sync_handler+0xb0/0x138 el0t_32_sync+0x194/0x198 Fixes: 4d56a4f08391 ("drm/tidss: Annotate dma-fence critical section in commit path") Reviewed-by: Aradhya Bhatia Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20230920-dma-fence-annotation-revert-v1-1-7ebf6f7f5bf6@ideasonboard.com Signed-off-by: Sasha Levin

drm: tidss: Fix pixel format definition

2023-03-10T08:33:09+00:00

[ Upstream commit 2df0433b18f2735a49d2c3a968b40fa2881137c0 ] There was a long-standing bug from a typo that created 2 ARGB1555 and ABGR1555 pixel format entries. Weston 10 has a sanity check that alerted me to this issue. According to the Supported Pixel Data formats table we have the later entries should have been for Alpha-X instead. Signed-off-by: Randolph Sapp Fixes: 32a1795f57eecc ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Reviewed-by: Aradhya Bhatia Acked-by: Andrew Davis Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20221202001803.1765805-1-rs@ti.com Signed-off-by: Sasha Levin

drm/tidss: fix repeated words in comments

2022-09-09T13:23:26+00:00

Delete the redundant word 'to'. Signed-off-by: Jilin Yuan Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20220824130450.41703-1-yuanjilin@cdjrlc.com