kernel/linux.git/drivers/gpu/drm/tidss, branch v5.10.257

drm/tidss: Use the crtc_* timings when programming the HW

2025-12-06T21:08:11+00:00

[ Upstream commit 478306edc23eec4f0ec24a46222485910c66212d ] Use the crtc_* fields from drm_display_mode, instead of the "logical" fields. This shouldn't change anything in practice, but afaiu the crtc_* fields are the correct ones to use here. Reviewed-by: Aradhya Bhatia Tested-by: Parth Pancholi Tested-by: Jayesh Choudhary Reviewed-by: Devarsh Thakkar Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-3-e61cc06074c2@ideasonboard.com Signed-off-by: Tomi Valkeinen Signed-off-by: Sasha Levin

drm/tidss: Clear the interrupt status for interrupts being disabled

2025-03-13T11:47:22+00:00

commit 361a2ebb5cad211732ec3c5d962de49b21895590 upstream. The driver does not touch the irqstatus register when it is disabling interrupts. This might cause an interrupt to trigger for an interrupt that was just disabled. To fix the issue, clear the irqstatus registers right after disabling the interrupts. Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org Reported-by: Jonathan Cormier Closes: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1394222/am625-issue-about-tidss-rcu_preempt-self-detected-stall-on-cpu/5424479#5424479 Signed-off-by: Devarsh Thakkar [Tomi: mostly rewrote the patch] Reviewed-by: Jonathan Cormier Tested-by: Jonathan Cormier Reviewed-by: Aradhya Bhatia Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-5-82ddaec94e4a@ideasonboard.com Signed-off-by: Greg Kroah-Hartman

drm/tidss: Fix issue in irq handling causing irq-flood issue

2025-03-13T11:47:22+00:00

commit 44b6730ab53ef04944fbaf6da0e77397531517b7 upstream. It has been observed that sometimes DSS will trigger an interrupt and the top level interrupt (DISPC_IRQSTATUS) is not zero, but the VP and VID level interrupt-statuses are zero. As the top level irqstatus is supposed to tell whether we have VP/VID interrupts, the thinking of the driver authors was that this particular case could never happen. Thus the driver only clears the DISPC_IRQSTATUS bits which has corresponding interrupts in VP/VID status. So when this issue happens, the driver will not clear DISPC_IRQSTATUS, and we get an interrupt flood. It is unclear why the issue happens. It could be a race issue in the driver, but no such race has been found. It could also be an issue with the HW. However a similar case can be easily triggered by manually writing to DISPC_IRQSTATUS_RAW. This will forcibly set a bit in the DISPC_IRQSTATUS and trigger an interrupt, and as the driver never clears the bit, we get an interrupt flood. To fix the issue, always clear DISPC_IRQSTATUS. The concern with this solution is that if the top level irqstatus is the one that triggers the interrupt, always clearing DISPC_IRQSTATUS might leave some interrupts unhandled if VP/VID interrupt statuses have bits set. However, testing shows that if any of the irqstatuses is set (i.e. even if DISPC_IRQSTATUS == 0, but a VID irqstatus has a bit set), we will get an interrupt. Co-developed-by: Bin Liu Signed-off-by: Bin Liu Co-developed-by: Devarsh Thakkar Signed-off-by: Devarsh Thakkar Co-developed-by: Jonathan Cormier Signed-off-by: Jonathan Cormier Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org Tested-by: Jonathan Cormier Reviewed-by: Aradhya Bhatia Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-1-82ddaec94e4a@ideasonboard.com Signed-off-by: Greg Kroah-Hartman

drm/tidss: Fix initial plane zpos values

2024-03-26T22:21:58+00:00

[ Upstream commit 3ec948ccb2c4b99e8fbfdd950adbe92ea577b395 ] When the driver sets up the zpos property it sets the default zpos value to the HW id of the plane. That is fine as such, but as on many DSS versions the driver arranges the DRM planes in a different order than the HW planes (to keep the non-scalable planes first), this leads to odd initial zpos values. An example is J721e, where the initial zpos values for DRM planes are 1, 3, 0, 2. In theory the userspace should configure the zpos values properly when using multiple planes, and in that sense the initial zpos values shouldn't matter, but there's really no reason not to fix this and help the userspace apps which don't handle zpos perfectly. In particular, some versions of Weston seem to have issues dealing with the planes with the current default zpos values. So let's change the zpos values for the DRM planes to 0, 1, 2, 3. Another option would be to configure the planes marked as primary planes to zpos 0. On a two display system this would give us plane zpos values of 0, 0, 1, 2. The end result and behavior would be very similar in this option, and I'm not aware that this would actually help us in any way. So, to keep the code simple, I opted for the 0, 1, 2, 3 values. Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Reviewed-by: Aradhya Bhatia Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20240213-tidss-fixes-v1-1-d709e8dfa505@ideasonboard.com Signed-off-by: Sasha Levin

drm/tidss: Fix atomic_flush check

2024-02-23T07:41:59+00:00

commit 95d4b471953411854f9c80b568da7fcf753f3801 upstream. tidss_crtc_atomic_flush() checks if the crtc is enabled, and if not, returns immediately as there's no reason to do any register changes. However, the code checks for 'crtc->state->enable', which does not reflect the actual HW state. We should instead look at the 'crtc->state->active' flag. This causes the tidss_crtc_atomic_flush() to proceed with the flush even if the active state is false, which then causes us to hit the WARN_ON(!crtc->state->event) check. Fix this by checking the active flag, and while at it, fix the related debug print which had "active" and "needs modeset" wrong way. Cc: Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Reviewed-by: Aradhya Bhatia Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-10-ac91b5ea35c0@ideasonboard.com Signed-off-by: Tomi Valkeinen Signed-off-by: Greg Kroah-Hartman

drm: tidss: Fix pixel format definition

2023-03-11T15:39:30+00:00

[ Upstream commit 2df0433b18f2735a49d2c3a968b40fa2881137c0 ] There was a long-standing bug from a typo that created 2 ARGB1555 and ABGR1555 pixel format entries. Weston 10 has a sanity check that alerted me to this issue. According to the Supported Pixel Data formats table we have the later entries should have been for Alpha-X instead. Signed-off-by: Randolph Sapp Fixes: 32a1795f57eecc ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Reviewed-by: Aradhya Bhatia Acked-by: Andrew Davis Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20221202001803.1765805-1-rs@ti.com Signed-off-by: Sasha Levin

drm/tidss: implement WA for AM65xx erratum i2000

2020-08-21T12:17:05+00:00

This patch implements WA for AM65xx erratum i2000, which causes YUV formats to show wrong colors. An earlier patch removed a partial WA: a8d9d7da1546349f18eb2d6b6b3a04bdeb38719d ("drm/tidss: remove AM65x PG1 YUV erratum code") The patch explains the reasoning for removal. The change in plans has been that it has become clear that there are and will be users for PG1 SoCs and as such it's good to implement the WA for PG1s. This patch adds the WA back so that it is only used on SR1.0 (which is the new name for PG1). The previous WA code didn't check the SoC revision, which this patch does. Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20200812112625.59897-1-tomi.valkeinen@ti.com Reviewed-by: Jyri Sarha

Merge tag 'drm-misc-fixes-2020-08-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2020-08-11T02:00:30+00:00

* backmerge from drm-fixes at v5.8-rc7 * add orientation quirk for ASUS T103HAF * drm/omap: force runtime PM suspend on system suspend * drm/tidss: fix modeset init for DPI panels * re-added docs for drm_gem_flink_ioctl() * ttm: fix page-offset calculation within TTM Signed-off-by: Dave Airlie From: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20200804125510.GA29670@linux-uq9g

drm/tidss: fix modeset init for DPI panels

2020-08-04T08:10:21+00:00

The connector type for DISPC's DPI videoport was set the LVDS instead of DPI. This causes any DPI panel setup to fail with tidss, making all DPI panels unusable. Fix this by using correct connector type. Signed-off-by: Tomi Valkeinen Fixes: 32a1795f57eecc39749017 ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org # v5.7+ Link: https://patchwork.freedesktop.org/patch/msgid/20200604080214.107159-1-tomi.valkeinen@ti.com Reviewed-by: Jyri Sarha

drm/tidss: Replace HTTP links with HTTPS ones

2020-07-16T20:13:52+00:00

Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Acked-by: Jyri Sarha Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200713123913.34205-1-grandmaster@al2klimov.de