kernel/linux.git/drivers/gpu/drm/tegra, branch v4.14.53

drm/tegra: Shutdown on driver unbind

2018-05-30T05:52:17+00:00

[ Upstream commit 192b4af6cd28cdad9b42fd79c21a90a2aeb0bec7 ] Since commit 846c7dfc1193 ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2."), removing the last framebuffer will no longer disable the corresponding pipeline, which causes the KMS core to complain about leaked connectors on driver unbind. Fix this by calling drm_atomic_helper_shutdown() on driver unbind, which will cause all display pipelines to be shut down and therefore drop the extra references on the connectors. Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

drm/tegra: trace: Fix path to include

2017-09-26T09:08:17+00:00

The TRACE_INCLUDE_FILE macro needs to specify the path relative to the define_trace.h header rather than relative to the file defining it. Reported-by: Dmitry Osipenko Tested-by: Dmitry Osipenko Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20170823171326.23620-1-thierry.reding@gmail.com

Merge tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

2017-08-21T07:37:33+00:00

drm/tegra: Changes for v4.14-rc1 This contains a couple of fixes and improvements for host1x, with some preparatory work for Tegra186 support. The remainder is cleanup and minor bugfixes for Tegra DRM along with enhancements to debuggability. There have also been some enhancements to the kernel interfaces for host1x job submissions and support for mmap'ing PRIME buffers directly, all of which get the interfaces very close to ready for serious work. * tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux: (21 commits) drm/tegra: Prevent BOs from being freed during job submission drm/tegra: gem: Implement mmap() for PRIME buffers drm/tegra: Support render node drm/tegra: sor: Trace register accesses drm/tegra: dpaux: Trace register accesses drm/tegra: dsi: Trace register accesses drm/tegra: hdmi: Trace register accesses drm/tegra: dc: Trace register accesses drm/tegra: sor: Use unsigned int for register offsets drm/tegra: hdmi: Use unsigned int for register offsets drm/tegra: dsi: Use unsigned int for register offsets drm/tegra: dpaux: Use unsigned int for register offsets drm/tegra: dc: Use unsigned int for register offsets drm/tegra: Fix NULL deref in debugfs/iova drm/tegra: switch to drm_*_get(), drm_*_put() helpers drm/tegra: Set MODULE_FIRMWARE for the VIC drm/tegra: Add CONFIG_OF dependency gpu: host1x: Support sub-devices recursively gpu: host1x: fix error return code in host1x_probe() gpu: host1x: Fix bitshift/mask multipliers ...

drm/tegra: Prevent BOs from being freed during job submission

2017-08-17T15:57:18+00:00

Since DRM IOCTL's are lockless, there is a chance that BOs could be released while a job submission is in progress. To avoid that, keep the GEM reference until the job has been pinned, part of which will be to take another reference. v2: remove redundant check and avoid memory leak Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

drm/tegra: gem: Implement mmap() for PRIME buffers

2017-08-17T15:57:18+00:00

The mapping of PRIME buffers can reuse much of the GEM mapping code, so extract the common bits into a new tegra_gem_mmap() helper. Reviewed-by: Chris Wilson Signed-off-by: Thierry Reding

drm/tegra: Support render node

2017-08-17T15:57:17+00:00

None of the driver-specific IOCTLs are privileged, so mark them as such and advertise that the driver supports render nodes. Signed-off-by: Thierry Reding

drm/tegra: sor: Trace register accesses

2017-08-17T15:57:17+00:00

Add tracepoint events for SOR controller register accesses. Signed-off-by: Thierry Reding

drm/tegra: dpaux: Trace register accesses

2017-08-17T15:57:16+00:00

Add tracepoint events for DPAUX controller register accesses. Signed-off-by: Thierry Reding

drm/tegra: dsi: Trace register accesses

2017-08-17T15:57:16+00:00

Add tracepoint events for DSI controller register accesses. Signed-off-by: Thierry Reding