kernel/linux.git/drivers/gpu/drm/sun4i, branch v5.15.89

drm/sun4i: dsi: Prevent underflow when computing packet sizes

2022-08-25T09:40:29+00:00

[ Upstream commit 82a1356a933d8443139f8886f11b63c974a09a67 ] Currently, the packet overhead is subtracted using unsigned arithmetic. With a short sync pulse, this could underflow and wrap around to near the maximal u16 value. Fix this by using signed subtraction. The call to max() will correctly handle any negative numbers that are produced. Apply the same fix to the other timings, even though those subtractions are less likely to underflow. Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by: Samuel Holland Reviewed-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20220812031623.34057-1-samuel@sholland.org Signed-off-by: Sasha Levin

drm/sun4i: Fix crash during suspend after component bind failure

2022-06-29T07:03:22+00:00

[ Upstream commit 1342b5b23da9559a1578978eaff7f797d8a87d91 ] If the component driver fails to bind, or is unbound, the driver data for the top-level platform device points to a freed drm_device. If the system is then suspended, the driver passes this dangling pointer to drm_mode_config_helper_suspend(), which crashes. Fix this by only setting the driver data while the platform driver holds a reference to the drm_device. Fixes: 624b4b48d9d8 ("drm: sun4i: Add support for suspending the display driver") Signed-off-by: Samuel Holland Reviewed-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20220615054254.16352-1-samuel@sholland.org Signed-off-by: Sasha Levin

drm/sun4i: Remove obsolete references to PHYS_OFFSET

2022-05-09T07:14:37+00:00

[ Upstream commit dc3ae06c5f2170d879ff58696f629d8c3868aec3 ] commit b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place") added a platform device notifier that sets the DMA offset for all of the display engine frontend and backend devices. The code applying the offset to DMA buffer physical addresses was then removed from the backend driver in commit 756668ba682e ("drm/sun4i: backend: Remove the MBUS quirks"), but the code subtracting PHYS_OFFSET was left in the frontend driver. As a result, the offset was applied twice in the frontend driver. This likely went unnoticed because it only affects specific configurations (scaling or certain pixel formats) where the frontend is used, on boards with both one of these older SoCs and more than 1 GB of DRAM. In addition, the references to PHYS_OFFSET prevent compiling the driver on architectures where PHYS_OFFSET is not defined. Fixes: b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place") Reviewed-by: Jernej Skrabec Signed-off-by: Samuel Holland Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-4-samuel@sholland.org Signed-off-by: Sasha Levin

drm/sun4i: mixer: Fix P010 and P210 format numbers

2022-03-16T13:23:37+00:00

[ Upstream commit 9470c29faa91c804aa04de4c10634bf02462bfa5 ] It turns out that DE3 manual has inverted YUV and YVU format numbers for P010 and P210. Invert them. This was tested by playing video decoded to P010 and additionally confirmed by looking at BSP driver source. Fixes: 169ca4b38932 ("drm/sun4i: Add separate DE3 VI layer formats") Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20220228181436.1424550-1-jernej.skrabec@gmail.com Signed-off-by: Sasha Levin

drm/sun4i: dw-hdmi: Fix missing put_device() call in sun8i_hdmi_phy_get

2022-03-08T18:12:37+00:00

[ Upstream commit c71af3dae3e34d2fde0c19623cf7f8483321f0e3 ] The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the error handling path. Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device") Signed-off-by: Miaoqian Lin Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20220107083633.20843-1-linmq006@gmail.com Signed-off-by: Sasha Levin

drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY

2021-12-08T08:04:37+00:00

[ Upstream commit bb162bb2b4394108c8f055d1b115735331205e28 ] When PHY_SUN6I_MIPI_DPHY is selected, and RESET_CONTROLLER is not selected, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for PHY_SUN6I_MIPI_DPHY Depends on [n]: (ARCH_SUNXI [=n] || COMPILE_TEST [=y]) && HAS_IOMEM [=y] && COMMON_CLK [=y] && RESET_CONTROLLER [=n] Selected by [y]: - DRM_SUN6I_DSI [=y] && HAS_IOMEM [=y] && DRM_SUN4I [=y] This is because DRM_SUN6I_DSI selects PHY_SUN6I_MIPI_DPHY without selecting or depending on RESET_CONTROLLER, despite PHY_SUN6I_MIPI_DPHY depending on RESET_CONTROLLER. These unmet dependency bugs were detected by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. v2: Fixed indentation to match the rest of the file. Signed-off-by: Julian Braha Acked-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20211109032351.43322-1-julianbraha@gmail.com Signed-off-by: Sasha Levin

drm/sun4i: Fix macros in sun8i_csc.h

2021-11-18T18:17:20+00:00

commit c302c98da646409d657a473da202f10f417f3ff1 upstream. Macros SUN8I_CSC_CTRL() and SUN8I_CSC_COEFF() don't follow usual recommendation of having arguments enclosed in parenthesis. While that didn't change anything for quite sometime, it actually become important after CSC code rework with commit ea067aee45a8 ("drm/sun4i: de2/de3: Remove redundant CSC matrices"). Without this fix, colours are completely off for supported YVU formats on SoCs with DE2 (A64, H3, R40, etc.). Fix the issue by enclosing macro arguments in parenthesis. Cc: stable@vger.kernel.org # 5.12+ Fixes: 883029390550 ("drm/sun4i: Add DE2 CSC library") Reported-by: Roman Stratiienko Signed-off-by: Jernej Skrabec Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210831184819.93670-1-jernej.skrabec@gmail.com Signed-off-by: Greg Kroah-Hartman

drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup

2021-10-06T09:05:44+00:00

Recent rework, which made HDMI PHY driver a platform device, inadvertely reversed clock setup order. HW is very touchy about it. Proper way is to handle controllers resets and clocks first and HDMI PHYs second. Currently, without this fix, first mode set completely fails (nothing on HDMI monitor) on H3 era PHYs. On H6, it still somehow work. Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which will assure that code is executed after controllers reset & clocks are handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit them at controllers driver unload. Tested on A64, H3, H6 and R40. Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device") Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210915175836.3158839-1-jernej.skrabec@gmail.com Signed-off-by: Maarten Lankhorst

drm/bridge: Centralize error message when bridge attach fails

2021-07-28T13:33:12+00:00

Being informed of a failure to attach a bridge is useful, and many drivers prints an error message in that case. Move the message to drm_bridge_attach() to avoid code duplication. Suggested-by: Stephen Boyd Signed-off-by: Laurent Pinchart Reviewed-by: Tomi Valkeinen Reviewed-by: Jyri Sarha

Merge tag 'drm-misc-next-2021-07-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2021-07-21T01:58:28+00:00

drm-misc-next for v5.15: UAPI Changes: Cross-subsystem Changes: - udmabuf: Add support for mapping hugepages - Add dma-buf stats to sysfs. - Assorted fixes to fbdev/omap2. - dma-buf: Document DMA_BUF_IOCTL_SYNC - Improve dma-buf non-dynamic exporter expectations better. - Add module parameters for dma-buf size and list limit. - Add HDMI codec support to vc4, to replace vc4's own codec. - Document dma-buf implicit fencing rules. - dma_resv_test_signaled test_all handling. Core Changes: - Extract i915's eDP backlight code into DRM helpers. - Assorted docbook updates. - Rework drm_dp_aux documentation. - Add support for the DP aux bus. - Shrink dma-fence-chain slightly. - Add alloc/free helpers for dma-fence-chain. - Assorted fixes to TTM., drm/of, bridge - drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers. - Small fix for scheduler completion. - Remove use of drm_device.irq_enabled. - Print the driver name to dmesg when registering framebuffer. - Export drm/gem's shadow plane handling, and use it in vkms. - Assorted small fixes. Driver Changes: - Add eDP backlight to nouveau. - Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625, amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm. - Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU, EDT ETM0350G0DH6, Innolux EJ030NA panels. - Fix some simple pannels missing bus_format and connector types. - Add mks-guest-stats instrumentation support to vmwgfx. - Merge i915-ttm topic branch. - Make s6e63m0 panel use Mipi-DBI helpers. - Add detect() supoprt for AST. - Use interrupts for hotplug on vc4. - vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now. - vmwgfx now uses copies of vmware's internal device headers. - Slowly convert ti-sn65dsi83 over to atomic. - Rework amdgpu dma-resv handling. - Fix virtio fencing for planes. - Ensure amdgpu can always evict to SYSTEM. - Many drivers fixed for implicit fencing rules. - Set default prepare/cleanup fb for tiny, vram and simple helpers too. - Rework panfrost gpu reset and related serialization. - Update VKMS todo list. - Make bochs a tiny gpu driver, and use vram helper. - Use linux irq interfaces instead of drm_irq in some drivers. - Add support for Raspberry Pi Pico to GUD. Signed-off-by: Dave Airlie # gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST # gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3 # gpg: Good signature from "Maarten Lankhorst " [expired] # gpg: aka "Maarten Lankhorst " [expired] # gpg: aka "Maarten Lankhorst " [expired] # gpg: Note: This key has expired! # Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3 From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com