kernel/linux.git/drivers/gpu/drm/sun4i, branch v5.12.1

Merge tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm

2021-02-21T22:44:44+00:00

Pull drm updates from Dave Airlie: "A pretty normal tree, lots of refactoring across the board, ttm, i915, nouveau, and bunch of features in various drivers. docs: - lots of updated docs core: - require crtc to have unique primary plane - fourcc macro fix - PCI bar quirk for bar resizing - don't sent hotplug on error - move vm code to legacy - nuke hose only used on old oboslete alpha dma-buf: - kernel doc updates - improved lock tracking dp/hdmi: - DP-HDMI2.1 protocol converter support ttm: - bo size handling cleanup - release a pinned bo warning - cleanup lru handler - avoid using pages with drm_prime_sg_to_page_addr_arrays cma-helper: - prime/mmap fixes bridge: - add DP support gma500: - remove gma3600 support i915: - try eDP fast/narrow link again with fallback - Intel eDP backlight control - replace display register read/write macros - refactor intel_display.c - display power improvements - HPD code cleanup - Rocketlake display fixes - Power/backlight/RPM fixes - DG1 display fix - IVB/BYT clear residuals security fix again - make i915 mitigations options via parameter - HSW GT1 GPU hangs fixes - DG1 workaround hang fixes - TGL DMAR hang avoidance - Lots of GT fixes - follow on fixes for residuals clear - gen7 per-engine-reset support - HDCP2.2 + HDCP1.4 GEN12 DP MST support - TGL clear color support - backlight refactoring - VRR/Adaptive sync enabling on DP/EDP for TGL+ - async flips for all ilk+ amdgpu: - rework IH ring handling (Vega/Navi) - rework HDP handling (Vega/Navi) - swSMU updates for renoir/vangogh - Sienna Cichild overdrive support - FP16 on DCE8-11 support - GPU reset on navy flounder/vangogh - SMU profile fixes for APU - SR-IOV fixes - Vangogh SMU fixes - fan speed control fixes amdkfd: - config handling fix - buffer free fix - recursive lock warnings fix nouveau: - Turing MMU fault recovery fixes - mDP connectors reporting fix - audio locking fixes - rework engines/instances code to support new scheme tegra: - VIC newer firmware support - display/gr2d fixes for older tegra - pm reference leak fix mediatek: - SOC MT8183 support - decouple sub driver + share mtk mutex driver radeon: - PCI resource fix for some platforms ingenic: - pm support - 8-bit delta RGB panels vmwgfx: - managed driver helpers vc4: - BCM2711 DSI1 support - converted to atomic helpers - enable 10/12 bpc outputs - gem prime mmap helpers - CEC fix omap: - use degamma table - CTM support - rework DSI support imx: - stack usage fixes - drm managed support - imx-tve clock provider leak fix - rcar-du: - default mode fixes - conversion to managed API hisilicon: - use simple encoder vkms: - writeback connector support d3: - BT2020 support" * tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm: (1459 commits) drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2) drm/radeon: OLAND boards don't have VCE drm/amdkfd: Fix recursive lock warnings drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth() drm/amd/display: Fix potential integer overflow drm/amdgpu/display: remove hdcp_srm sysfs on device removal drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3 drm/i915/gt: Correct surface base address for renderclear drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling drm/nouveau/top/ga100: initial support drm/nouveau/top: add ioctrl/nvjpg drm/nouveau/privring: rename from ibus drm/nouveau/nvkm: remove nvkm_subdev.index drm/nouveau/nvkm: determine subdev id/order from layout drm/nouveau/vic: switch to instanced constructor drm/nouveau/sw: switch to instanced constructor drm/nouveau/sec2: switch to instanced constructor drm/nouveau/sec: switch to instanced constructor drm/nouveau/pm: switch to instanced constructor drm/nouveau/nvenc: switch to instanced constructor ...

drm/sun4i: dw-hdmi: Fix max. frequency for H6

2021-02-10T10:20:38+00:00

It turns out that reasoning for lowering max. supported frequency is wrong. Scrambling works just fine. Several now fixed bugs prevented proper functioning, even with rates lower than 340 MHz. Issues were just more pronounced with higher frequencies. Fix that by allowing max. supported frequency in HW and fix the comment. Fixes: cd9063757a22 ("drm/sun4i: DW HDMI: Lower max. supported rate for H6") Reviewed-by: Chen-Yu Tsai Tested-by: Andre Heider Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-6-jernej.skrabec@siol.net

drm/sun4i: Fix H6 HDMI PHY configuration

2021-02-10T10:20:13+00:00

As it turns out, vendor HDMI PHY driver for H6 has a pretty big table of predefined values for various pixel clocks. However, most of them are not useful/tested because they come from reference driver code. Vendor PHY driver is concerned with only few of those, namely 27 MHz, 74.25 MHz, 148.5 MHz, 297 MHz and 594 MHz. These are all frequencies for standard CEA modes. Fix sun50i_h6_cur_ctr and sun50i_h6_phy_config with the values only for aforementioned frequencies. Table sun50i_h6_mpll_cfg doesn't need to be changed because values are actually frequency dependent and not so much SoC dependent. See i.MX6 documentation for explanation of those values for similar PHY. Fixes: c71c9b2fee17 ("drm/sun4i: Add support for Synopsys HDMI PHY") Tested-by: Andre Heider Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-5-jernej.skrabec@siol.net

drm/sun4i: dw-hdmi: always set clock rate

2021-02-10T10:20:01+00:00

As expected, HDMI controller clock should always match pixel clock. In the past, changing HDMI controller rate would seemingly worsen situation. However, that was the result of other bugs which are now fixed. Fix that by removing set_rate quirk and always set clock rate. Fixes: 40bb9d3147b2 ("drm/sun4i: Add support for H6 DW HDMI controller") Reviewed-by: Chen-Yu Tsai Tested-by: Andre Heider Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-4-jernej.skrabec@siol.net

drm/sun4i: tcon: set sync polarity for tcon1 channel

2021-02-10T10:19:56+00:00

Channel 1 has polarity bits for vsync and hsync signals but driver never sets them. It turns out that with pre-HDMI2 controllers seemingly there is no issue if polarity is not set. However, with HDMI2 controllers (H6) there often comes to de-synchronization due to phase shift. This causes flickering screen. It's safe to assume that similar issues might happen also with pre-HDMI2 controllers. Solve issue with setting vsync and hsync polarity. Note that display stacks with tcon top have polarity bits actually in tcon0 polarity register. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Reviewed-by: Chen-Yu Tsai Tested-by: Andre Heider Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-3-jernej.skrabec@siol.net

drm/sun4i: tcon: fix inverted DCLK polarity

2021-01-14T11:37:28+00:00

During commit 88bc4178568b ("drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags") DRM_BUS_FLAG_* macros have been changed to avoid ambiguity but just because of this ambiguity previous DRM_BUS_FLAG_PIXDATA_(POS/NEG)EDGE were used meaning _SAMPLE_ not _DRIVE_. This leads to DLCK inversion and need to fix but instead of swapping phase values, let's adopt an easier approach Maxime suggested: It turned out that bit 26 of SUN4I_TCON0_IO_POL_REG is dedicated to invert DCLK polarity and this makes things really easier than before. So let's handle DCLK polarity by adding SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE as bit 26 and activating according to bus_flags the same way it is done for all the other signals polarity. Fixes: 88bc4178568b ("drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags") Suggested-by: Maxime Ripard Signed-off-by: Giulio Benetti Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210114081732.9386-1-giulio.benetti@benettiengineering.com

drm/sun4i: Add support for BT2020 to DE3

2021-01-13T09:33:57+00:00

DE3 supports 10-bit formats, so it's only naturally to also support BT2020 encoding. Add support for it. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210110201947.3611649-4-jernej.skrabec@siol.net

drm/sun4i: de2/de3: Remove redundant CSC matrices

2021-01-13T09:33:54+00:00

YUV to RGB matrices are almost identical to YVU to RGB matrices. They only have second and third column reversed. Do that reversion in code in order to lower amount of static data and redundancy. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210110201947.3611649-3-jernej.skrabec@siol.net

drm/sun4i: csc: Rework DE3 CSC macros

2021-01-13T09:33:50+00:00

Rework DE3 CSC macros to take just one coordinate instead of two. This will make its usage easier in subsequent commit. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210110201947.3611649-2-jernej.skrabec@siol.net

Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-12-17T00:38:41+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...