kernel/linux.git/drivers/gpu/drm/sun4i, branch v4.19.67

drm/sun4i: Fix sun8i HDMI PHY configuration for > 148.5 MHz

2019-06-09T07:17:23+00:00

commit 831adffb3b7b8df4c8e20b7b00843129fb87a166 upstream. Vendor provided documentation says that EMP bits should be set to 3 for pixel clocks greater than 148.5 MHz. Fix that. Cc: stable@vger.kernel.org # 4.17+ Fixes: 4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant") Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190514204337.11068-3-jernej.skrabec@siol.net Signed-off-by: Greg Kroah-Hartman

drm/sun4i: Fix sun8i HDMI PHY clock initialization

2019-06-09T07:17:22+00:00

commit 8a943c6021ba8b95a36c842327e468df1fddd4a7 upstream. Current code initializes HDMI PHY clock driver before reset line is deasserted and clocks enabled. Because of that, initial readout of clock divider is incorrect (0 instead of 2). This causes any clock rate with divider 1 (register value 0) to be set incorrectly. Fix this by moving initialization of HDMI PHY clock driver after reset line is deasserted and clocks enabled. Cc: stable@vger.kernel.org # 4.17+ Fixes: 4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant") Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190514204337.11068-2-jernej.skrabec@siol.net Signed-off-by: Greg Kroah-Hartman

drm/sun4i: dsi: Enforce boundaries on the start delay

2019-05-31T13:46:35+00:00

[ Upstream commit efa31801203ac2f5c6a82a28cb991c7163ee0f1d ] The Allwinner BSP makes sure that we don't end up with a null start delay or with a delay larger than vtotal. The former condition is likely to happen now with the reworked start delay, so make sure we enforce the same boundaries. Signed-off-by: Maxime Ripard Reviewed-by: Paul Kocialkowski Link: https://patchwork.freedesktop.org/patch/msgid/c9889cf5f7a3d101ef380905900b45a182596f56.1549896081.git-series.maxime.ripard@bootlin.com Signed-off-by: Sasha Levin

drm/sun4i: dsi: Change the start delay calculation

2019-05-31T13:46:34+00:00

[ Upstream commit da676c6aa6413d59ab0a80c97bbc273025e640b2 ] The current calculation for the video start delay in the current DSI driver is that it is the total vertical size, minus the front porch and sync length, plus 1. This equals to the active vertical size plus the back porch plus 1. That 1 is coming in the Allwinner BSP from an variable that is set to 1. However, if we look at the Allwinner BSP more closely, and especially in the "legacy" code for the display (in drivers/video/sunxi/legacy/), we can see that this variable is actually computed from the porches and the sync minus 10, clamped between 8 and 100. This fixes the start delay symptom we've seen on some panels (vblank timeouts with vertical white stripes at the bottom of the panel). Reviewed-by: Paul Kocialkowski Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/6e5f72e68f47ca0223877464bf12f0c3f3978de8.1549896081.git-series.maxime.ripard@bootlin.com Signed-off-by: Sasha Levin

drm/sun4i: Unbind components before releasing DRM and memory

2019-05-16T17:41:25+00:00

[ Upstream commit e02bc29b2cfa7806830d6da8b2322cddd67e8dfe ] Our components may still be using the DRM device driver (if only to access our driver's private data), so make sure to unbind them before the final drm_dev_put. Also release our reserved memory after component unbind instead of before to match reverse creation order. Fixes: f5a9ed867c83 ("drm/sun4i: Fix component unbinding and component master deletion") Signed-off-by: Paul Kocialkowski Reviewed-by: Chen-Yu Tsai Link: https://patchwork.freedesktop.org/patch/msgid/20190424090413.6918-1-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin

drm/sun4i: Fix component unbinding and component master deletion

2019-05-16T17:41:24+00:00

[ Upstream commit f5a9ed867c83875546c9aadd4ed8e785e9adcc3c ] For our component-backed driver to be properly removed, we need to delete the component master in sun4i_drv_remove and make sure to call component_unbind_all in the master's unbind so that all components are unbound when the master is. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Paul Kocialkowski Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190418132727.5128-4-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin

drm/sun4i: Set device driver data at bind time for use in unbind

2019-05-16T17:41:24+00:00

[ Upstream commit 02b92adbe33e6dbd15dc6e32540b22f47c4ff0a2 ] Our sun4i_drv_unbind gets the drm device using dev_get_drvdata. However, that driver data is never set in sun4i_drv_bind. Set it there to avoid getting a NULL pointer at unbind time. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Paul Kocialkowski Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190418132727.5128-3-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin

drm/sun4i: tcon top: Fix NULL/invalid pointer dereference in sun8i_tcon_top_un/bind

2019-05-10T15:54:08+00:00

[ Upstream commit 1a07a94b47b1f528f39c3e6187b5eaf02efe44ea ] There are two problems here: 1. Not all clk_data->hws[] need to be initialized, depending on various configured quirks. This leads to NULL ptr deref in clk_hw_unregister_gate() in sun8i_tcon_top_unbind() 2. If there is error when registering the clk_data->hws[], err_unregister_gates error path will try to unregister IS_ERR()=true (invalid) pointer. For problem (1) I have this stack trace: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: clk_hw_unregister+0x8/0x18 clk_hw_unregister_gate+0x14/0x28 sun8i_tcon_top_unbind+0x2c/0x60 component_unbind.isra.4+0x2c/0x50 component_bind_all+0x1d4/0x230 sun4i_drv_bind+0xc4/0x1a0 try_to_bring_up_master+0x164/0x1c0 __component_add+0xa0/0x168 component_add+0x10/0x18 sun8i_dw_hdmi_probe+0x18/0x20 platform_drv_probe+0x3c/0x70 really_probe+0xcc/0x278 driver_probe_device+0x34/0xa8 Problem (2) was identified by head scratching. Signed-off-by: Ondrej Jirman Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190405233048.3823-1-megous@megous.com Signed-off-by: Sasha Levin

drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init

2019-03-13T21:02:36+00:00

[ Upstream commit b14e945bda8ae227d1bf2b1837c0c4a61721cd1a ] When initializing clocks, a reference to the TCON channel 0 clock is obtained. However, the clock is never prepared and enabled later. Switching from simplefb to DRM actually disables the clock (that was usually configured by U-Boot) because of that. On the V3s, this results in a hang when writing to some mixer registers when switching over to DRM from simplefb. Fix this by preparing and enabling the clock when initializing other clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is apparently too late and results in the same mixer register access hang. Signed-off-by: Paul Kocialkowski Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin

drm/sun4i: hdmi: Fix usage of TMDS clock

2019-03-05T16:58:50+00:00

[ Upstream commit 5e1bc251cebc84b41b8eb5d2434e54d939a85430 ] Although TMDS clock is required for HDMI to properly function, nobody called clk_prepare_enable(). This fixes reference counting issues and makes sure clock is running when it needs to be running. Due to TDMS clock being parent clock for DDC clock, TDMS clock was turned on/off for each EDID probe, causing spurious failures for certain HDMI/DVI screens. Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Priit Laes [Maxime: Moved the TMDS clock enable earlier] Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190122073232.7240-1-plaes@plaes.org Signed-off-by: Sasha Levin