kernel/linux.git/drivers/gpu/drm/stm, branch v5.11.5

drm/: Constify struct drm_driver

2020-11-06T09:31:26+00:00

Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg Cc: kernel test robot Acked-by: Maxime Ripard Reviewed-by: Alex Deucher Signed-off-by: Daniel Vetter Cc: Sam Ravnborg Cc: Dave Airlie Cc: Gerd Hoffmann Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland Cc: Leo Li Cc: Alex Deucher Cc: Christian König Cc: Eric Anholt Cc: Maxime Ripard Cc: Ben Skeggs Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch

drm/atomic: Pass the full state to CRTC atomic begin and flush

2020-11-02T11:37:49+00:00

The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_begin and atomic_flush. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_begin(crtc, old_crtc_state); + FUNCS->atomic_begin(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_flush(crtc, old_crtc_state); + FUNCS->atomic_flush(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_begin(crtc, crtc_state); + FUNCS->atomic_begin(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_flush(crtc, crtc_state); + FUNCS->atomic_flush(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include @ no_include depends on !include && adds_old_state @ @@ + #include #include Signed-off-by: Maxime Ripard Reviewed-by: Ville Syrjälä Acked-by: Daniel Vetter Acked-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech

drm/atomic: Pass the full state to CRTC atomic enable/disable

2020-10-09T07:55:59+00:00

If the CRTC driver ever needs to access the full DRM state, it can't do so at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state will have cleared the pointer from the struct drm_crtc_state to the struct drm_atomic_state before calling those hooks. In order to allow that, let's pass the full DRM state to atomic_enable and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_disable(crtc, crtc_state); + FUNCS->atomic_disable(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_enable(crtc, crtc_state); + FUNCS->atomic_enable(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_enable = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include @ no_include depends on !include && adds_old_state @ @@ + #include #include Signed-off-by: Maxime Ripard Acked-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech

drm/stm: repair runtime power management

2020-07-08T09:47:01+00:00

Add missing pm_runtime_get_sync() into ltdc_crtc_atomic_enable() to match pm_runtime_put_sync() in ltdc_crtc_atomic_disable(), otherwise the LTDC might suspend via runtime PM, disable clock, and then fail to resume later on. The test which triggers it is roughly -- run qt5 application which uses eglfs platform and etnaviv, stop the application, sleep for 15 minutes, run the application again. This leads to a timeout waiting for vsync, because the LTDC has suspended, but did not resume. Fixes: 35ab6cfbf211 ("drm/stm: support runtime power management") Signed-off-by: Marek Vasut Cc: Yannick Fertré Cc: Philippe Cornu Cc: Benjamin Gaignard Cc: Vincent Abriou Cc: Maxime Coquelin Cc: Alexandre Torgue To: dri-devel@lists.freedesktop.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Acked-by: Philippe Cornu Tested-by: Yannick Fertre Signed-off-by: Benjamin Gaignard Link: https://patchwork.freedesktop.org/patch/msgid/20200229221649.90813-1-marex@denx.de

drm/stm: ltdc: remove call of pm-runtime functions

2020-07-08T09:46:26+00:00

It is not necessary to suspend or stop the ltdc clocks to modify the pixel clock. Signed-off-by: Yannick Fertre Acked-by: Philippe Cornu Signed-off-by: Benjamin Gaignard Link: https://patchwork.freedesktop.org/patch/msgid/20200701120402.6444-1-yannick.fertre@st.com

drm/stm: Set GEM CMA functions with DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE

2020-06-10T07:05:32+00:00

DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE sets the functions in struct drm_driver to their defaults. No functional changes are made. v2: * update for DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE Signed-off-by: Thomas Zimmermann Reviewed-by: Philippe Cornu Reviewed-by: Emil Velikov Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-35-tzimmermann@suse.de

drm/stm: Use GEM CMA object functions

2020-06-10T07:05:25+00:00

Create GEM objects with drm_gem_cma_create_object_default_funcs(), which allocates the object and sets CMA's default object functions. Corresponding callbacks in struct drm_driver are cleared. No functional changes are made. Driver and object-function instances use the same callback functions, with the exception of vunmap. The implementation of vunmap is empty and left out in CMA's default object functions. v3: * convert to DRIVER_OPS macro in a separate patch Signed-off-by: Thomas Zimmermann Reviewed-by: Philippe Cornu Reviewed-by: Emil Velikov Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-34-tzimmermann@suse.de

drm/stm: ltdc: check number of endpoints

2020-04-27T13:42:12+00:00

Number of endpoints could exceed the fix value MAX_ENDPOINTS(2). Instead of increase simply this value, the number of endpoint could be read from device tree. Load sequence has been a little rework to take care of several panel or bridge which can be connected/disconnected or enable/disable. Signed-off-by: Yannick Fertre Signed-off-by: Benjamin Gaignard Link: https://patchwork.freedesktop.org/patch/msgid/1582877258-1112-1-git-send-email-yannick.fertre@st.com

drm/stm: Drop explicit drm_mode_config_cleanup call

2020-03-26T15:06:00+00:00

It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: Another driver with a bit much devm_kzalloc, which should probably use drmm_kzalloc instead ... v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Cc: Sam Ravnborg Cc: Thomas Zimmermann Acked-by: Sam Ravnborg Acked-by: Philippe Cornu Cc: Laurent Pinchart Signed-off-by: Daniel Vetter Cc: Yannick Fertre Cc: Philippe Cornu Cc: Benjamin Gaignard Cc: Vincent Abriou Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-39-daniel.vetter@ffwll.ch

drm/bridge: Extend bridge API to disable connector creation

2020-02-26T11:31:23+00:00

Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core). Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet. The change is based on the following semantic patch, with manual review and edits. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... } @ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> } @@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 ) Signed-off-by: Laurent Pinchart Reviewed-by: Boris Brezillon Acked-by: Sam Ravnborg Reviewed-by: Tomi Valkeinen Tested-by: Sebastian Reichel Reviewed-by: Sebastian Reichel Acked-by: Daniel Vetter Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com