kernel/linux.git/drivers/gpu/drm/solomon, branch v6.18.21

drm/solomon: Fix page start when updating rectangle in page addressing mode

2026-03-12T11:09:49+00:00

[ Upstream commit 36d9579fed6c9429aa172f77bd28c58696ce8e2b ] In page addressing mode, the pixel values of a dirty rectangle must be sent to the display controller one page at a time. The range of pages corresponding to a given rectangle is being incorrectly calculated as if the Y value of the top left coordinate of the rectangle was 0. This can result in rectangle updates being displayed on wrong parts of the screen. Fix the above issue by consolidating the start page calculation in a single place at the beginning of the update_rect function, and using the calculated value for all addressing modes. Fixes: b0daaa5cfaa5 ("drm/ssd130x: Support page addressing mode") Signed-off-by: Francesco Lavra Reviewed-by: Javier Martinez Canillas Link: https://patch.msgid.link/20260210180932.736502-1-flavra@baylibre.com Signed-off-by: Javier Martinez Canillas Signed-off-by: Sasha Levin

drm/ssd130x: Remove the use of dev_err_probe()

2025-09-01T14:09:19+00:00

Logging messages that show some type of "out of memory" error are generally unnecessary as there is a generic message and a stack dump done by the memory subsystem. These messages generally increase kernel size without much added value[1]. The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore, remove the useless call to dev_err_probe(), and just return the value instead. [1]: https://lore.kernel.org/lkml/1402419340.30479.18.camel@joe-AO725/ Signed-off-by: Liao Yuanhong Reviewed-by: Javier Martinez Canillas Link: https://lore.kernel.org/r/20250820131416.500048-1-liaoyuanhong@vivo.com Signed-off-by: Javier Martinez Canillas

drm/ssd130x: fix ssd132x_clear_screen() columns

2025-06-12T12:04:56+00:00

The number of columns relates to the width, not the height. Use the correct variable. Signed-off-by: John Keeping Reviewed-by: Javier Martinez Canillas Fixes: fdd591e00a9c ("drm/ssd130x: Add support for the SSD132x OLED controller family") Link: https://lore.kernel.org/r/20250611111307.1814876-1-jkeeping@inmusicbrands.com Signed-off-by: Javier Martinez Canillas

drm/ssd130x: ensure ssd132x pitch is correct

2025-01-16T09:48:47+00:00

The bounding rectangle is adjusted to ensure it aligns to SSD132X_SEGMENT_WIDTH, which may adjust the pitch. Calculate the pitch after aligning the left and right edge. Fixes: fdd591e00a9c ("drm/ssd130x: Add support for the SSD132x OLED controller family") Signed-off-by: John Keeping Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20250115110139.1672488-3-jkeeping@inmusicbrands.com Signed-off-by: Javier Martinez Canillas

drm/ssd130x: fix ssd132x encoding

2025-01-16T09:48:46+00:00

The ssd132x buffer is encoded one pixel per nibble, with two pixels in each byte. When encoding an 8-bit greyscale input, take the top 4-bits as the value and ensure the two pixels are distinct and do not overwrite each other. Fixes: fdd591e00a9c ("drm/ssd130x: Add support for the SSD132x OLED controller family") Signed-off-by: John Keeping Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20250115110139.1672488-2-jkeeping@inmusicbrands.com Signed-off-by: Javier Martinez Canillas

drm/ssd130x: Set SPI .id_table to prevent an SPI core warning

2025-01-08T11:10:37+00:00

The only reason for the ssd130x-spi driver to have an spi_device_id table is that the SPI core always reports an "spi:" MODALIAS, even when the SPI device has been registered via a Device Tree Blob. Without spi_device_id table information in the module's metadata, module autoloading would not work because there won't be an alias that matches the MODALIAS reported by the SPI core. This spi_device_id table is not needed for device matching though, since the of_device_id table is always used in this case. For this reason, the struct spi_driver .id_table member is currently not set in the SPI driver. Because the spi_device_id table is always required for module autoloading, the SPI core checks during driver registration that both an of_device_id table and a spi_device_id table are present and that they contain the same entries for all the SPI devices. Not setting the .id_table member in the driver then confuses the core and leads to the following warning when the ssd130x-spi driver is registered: [ 41.091198] SPI driver ssd130x-spi has no spi_device_id for sinowealth,sh1106 [ 41.098614] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1305 [ 41.105862] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1306 [ 41.113062] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1307 [ 41.120247] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1309 [ 41.127449] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1322 [ 41.134627] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1325 [ 41.141784] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1327 [ 41.149021] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1331 To prevent the warning, set the .id_table even though it's not necessary. Since the check is done even for built-in drivers, drop the condition to only define the ID table when the driver is built as a module. Finally, rename the variable to use the "_spi_id" convention used for ID tables. Fixes: 74373977d2ca ("drm/solomon: Add SSD130x OLED displays SPI support") Reviewed-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20241231114516.2063201-1-javierm@redhat.com Signed-off-by: Javier Martinez Canillas

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

2024-12-09T15:35:21+00:00

The v6.13-rc2 release included a bunch of breaking changes, specifically the MODULE_IMPORT_NS commit. Backmerge in order to fix them before the next pull-request. Include the fix from Stephen Roswell. Caused by commit 25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths") Interacting with commit cdd30ebb1b9f ("module: Convert symbol namespace to string literal") Reported-by: Stephen Rothwell Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au Signed-off-by: Maarten Lankhorst

drm: remove driver date from struct drm_driver and all drivers

2024-12-05T10:35:42+00:00

We stopped using the driver initialized date in commit 7fb8af6798e8 ("drm: deprecate driver date") and (eventually) started returning "0" for drm_version ioctl instead. Finish the job, and remove the unused date member from struct drm_driver, its initialization from drivers, along with the common DRIVER_DATE macros. v2: Also update drivers/accel (kernel test robot) Reviewed-by: Javier Martinez Canillas Acked-by: Alex Deucher Acked-by: Simon Ser Acked-by: Jeffrey Hugo Acked-by: Lucas De Marchi Acked-by: Dmitry Baryshkov # msm Reviewed-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com Signed-off-by: Jani Nikula

module: Convert symbol namespace to string literal

2024-12-02T19:34:44+00:00

Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS$([^)]*)$/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)$([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)$/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)$([^,]+), ([^)]+)$/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada Signed-off-by: Peter Zijlstra (Intel) Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH Signed-off-by: Linus Torvalds

drm/client: Move public client header to clients/ subdirectory

2024-11-15T08:42:13+00:00

Move the public header file drm_client_setup.h to the clients/ subdirectory and update all drivers. No functional changes. Signed-off-by: Thomas Zimmermann Reviewed-by: Jocelyn Falempe Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de