kernel/linux.git/drivers/gpu/drm/radeon, branch v4.14.233

drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected

2021-05-22T08:57:40+00:00

commit 227545b9a08c68778ddd89428f99c351fc9315ac upstream. Screen flickers rapidly when two 4K 60Hz monitors are in use. This issue doesn't happen when one monitor is 4K 60Hz (pixelclock 594MHz) and another one is 4K 30Hz (pixelclock 297MHz). The issue is gone after setting "power_dpm_force_performance_level" to "high". Following the indication, we found that the issue occurs when sclk is too low. So resolve the issue by disabling sclk switching when there are two monitors requires high pixelclock (> 297MHz). v2: - Only apply the fix to Oland. Signed-off-by: Kai-Heng Feng Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/radeon: Fix off-by-one power_state index heap overwrite

2021-05-22T08:57:38+00:00

[ Upstream commit 5bbf219328849e83878bddb7c226d8d42e84affc ] An out of bounds write happens when setting the default power state. KASAN sees this as: [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 ================================================================== BUG: KASAN: slab-out-of-bounds in radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] Write of size 4 at addr ffff88810178d858 by task systemd-udevd/157 CPU: 0 PID: 157 Comm: systemd-udevd Not tainted 5.12.0-E620 #50 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x239 kasan_report+0x170/0x1a8 radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] radeon_atombios_get_power_modes+0x144/0x1888 [radeon] radeon_pm_init+0x1019/0x1904 [radeon] rs690_init+0x76e/0x84a [radeon] radeon_device_init+0x1c1a/0x21e5 [radeon] radeon_driver_load_kms+0xf5/0x30b [radeon] drm_dev_register+0x255/0x4a0 [drm] radeon_pci_probe+0x246/0x2f6 [radeon] pci_device_probe+0x1aa/0x294 really_probe+0x30e/0x850 driver_probe_device+0xe6/0x135 device_driver_attach+0xc1/0xf8 __driver_attach+0x13f/0x146 bus_for_each_dev+0xfa/0x146 bus_add_driver+0x2b3/0x447 driver_register+0x242/0x2c1 do_one_initcall+0x149/0x2fd do_init_module+0x1ae/0x573 load_module+0x4dee/0x5cca __do_sys_finit_module+0xf1/0x140 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Without KASAN, this will manifest later when the kernel attempts to allocate memory that was stomped, since it collides with the inline slab freelist pointer: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 PID: 781 Comm: openrc-run.sh Tainted: G W 5.10.12-gentoo-E620 #2 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 RIP: 0010:kfree+0x115/0x230 Code: 89 c5 e8 75 ea ff ff 48 8b 00 0f ba e0 09 72 63 e8 1f f4 ff ff 41 89 c4 48 8b 45 00 0f ba e0 10 72 0a 48 8b 45 08 a8 01 75 02 <0f> 0b 44 89 e1 48 c7 c2 00 f0 ff ff be 06 00 00 00 48 d3 e2 48 c7 RSP: 0018:ffffb42f40267e10 EFLAGS: 00010246 RAX: ffffd61280ee8d88 RBX: 0000000000000004 RCX: 000000008010000d RDX: 4000000000000000 RSI: ffffffffba1360b0 RDI: ffffd61280ee8d80 RBP: ffffd61280ee8d80 R08: ffffffffb91bebdf R09: 0000000000000000 R10: ffff8fe2c1047ac8 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000100 FS: 00007fe80eff6b68(0000) GS:ffff8fe339c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe80eec7bc0 CR3: 0000000038012000 CR4: 00000000000006f0 Call Trace: __free_fdtable+0x16/0x1f put_files_struct+0x81/0x9b do_exit+0x433/0x94d do_group_exit+0xa6/0xa6 __x64_sys_exit_group+0xf/0xf do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe80ef64bea Code: Unable to access opcode bytes at RIP 0x7fe80ef64bc0. RSP: 002b:00007ffdb1c47528 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fe80ef64bea RDX: 00007fe80ef64f60 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 00007fe80ee2c620 R11: 0000000000000246 R12: 00007fe80eff41e0 R13: 00000000ffffffff R14: 0000000000000024 R15: 00007fe80edf9cd0 Modules linked in: radeon(+) ath5k(+) snd_hda_codec_realtek ... Use a valid power_state index when initializing the "flags" and "misc" and "misc2" fields. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537 Reported-by: Erhard F. Fixes: a48b9b4edb8b ("drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)") Fixes: 79daedc94281 ("drm/radeon/kms: minor pm cleanups") Signed-off-by: Kees Cook Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/radeon: fix copy of uninitialized variable back to userspace

2021-05-22T08:57:25+00:00

commit 8dbc2ccac5a65c5b57e3070e36a3dc97c7970d96 upstream. Currently the ioctl command RADEON_INFO_SI_BACKEND_ENABLED_MASK can copy back uninitialised data in value_tmp that pointer *value points to. This can occur when rdev->family is less than CHIP_BONAIRE and less than CHIP_TAHITI. Fix this by adding in a missing -EINVAL so that no invalid value is copied back to userspace. Addresses-Coverity: ("Uninitialized scalar variable) Cc: stable@vger.kernel.org # 3.13+ Fixes: 439a1cfffe2c ("drm/radeon: expose render backend mask to the userspace") Reviewed-by: Christian König Signed-off-by: Colin Ian King Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/radeon: fix multiple reference count leak

2020-09-03T09:22:25+00:00

[ Upstream commit 6f2e8acdb48ed166b65d47837c31b177460491ec ] On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by: Aditya Pakki Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/radeon: fix array out-of-bounds read and write issues

2020-08-21T07:48:08+00:00

[ Upstream commit 7ee78aff9de13d5dccba133f4a0de5367194b243 ] There is an off-by-one bounds check on the index into arrays table->mc_reg_address and table->mc_reg_table_entry[k].mc_data[j] that can lead to reads and writes outside of arrays. Fix the bound checking off-by-one error. Addresses-Coverity: ("Out-of-bounds read/write") Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by: Colin Ian King Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/radeon: Fix reference count leaks caused by pm_runtime_get_sync

2020-08-21T07:48:04+00:00

[ Upstream commit 9fb10671011143d15b6b40d6d5fa9c52c57e9d63 ] On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Acked-by: Evan Quan Signed-off-by: Aditya Pakki Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/radeon: fix double free

2020-07-22T07:22:19+00:00

commit 41855a898650803e24b284173354cc3e44d07725 upstream. clang static analysis flags this error drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc] kfree(rdev->pm.dpm.ps[i].ps_priv); ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc] kfree(rdev->pm.dpm.ps); ^~~~~~~~~~~~~~~~~~~~~~ problem is reported in ci_dpm_fini, with these code blocks. for (i = 0; i < rdev->pm.dpm.num_ps; i++) { kfree(rdev->pm.dpm.ps[i].ps_priv); } kfree(rdev->pm.dpm.ps); The first free happens in ci_parse_power_table where it cleans up locally on a failure. ci_dpm_fini also does a cleanup. ret = ci_parse_power_table(rdev); if (ret) { ci_dpm_fini(rdev); return ret; } So remove the cleanup in ci_parse_power_table and move the num_ps calculation to inside the loop so ci_dpm_fini will know how many array elements to free. Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by: Tom Rix Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/radeon: fix fb_div check in ni_init_smc_spll_table()

2020-06-30T19:38:08+00:00

commit 35f760b44b1b9cb16a306bdcc7220fbbf78c4789 upstream. clk_s is checked twice in a row in ni_init_smc_spll_table(). fb_div should be checked instead. Fixes: 69e0b57a91ad ("drm/radeon/kms: add dpm support for cayman (v5)") Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

vga_switcheroo: Use device link for HDA controller

2020-06-20T08:25:16+00:00

[ Upstream commit 07f4f97d7b4bf325d9f558c5b58230387e4e57e0 ] Back in 2013, runtime PM for GPUs with integrated HDA controller was introduced with commits 0d69704ae348 ("gpu/vga_switcheroo: add driver control power feature. (v3)") and 246efa4a072f ("snd/hda: add runtime suspend/resume on optimus support (v4)"). Briefly, the idea was that the HDA controller is forced on and off in unison with the GPU. The original code is mostly still in place even though it was never a 100% perfect solution: E.g. on access to the HDA controller, the GPU is powered up via vga_switcheroo_runtime_resume_hdmi_audio() but there are no provisions to keep it resumed until access to the HDA controller has ceased: The GPU autosuspends after 5 seconds, rendering the HDA controller inaccessible. Additionally, a kludge is required when hda_intel.c probes: It has to check whether the GPU is powered down (check_hdmi_disabled()) and defer probing if so. However in the meantime (in v4.10) the driver core has gained a feature called device links which promises to solve such issues in a clean way: It allows us to declare a dependency from the HDA controller (consumer) to the GPU (supplier). The PM core then automagically ensures that the GPU is runtime resumed as long as the HDA controller's ->probe hook is executed and whenever the HDA controller is accessed. By default, the HDA controller has a dependency on its parent, a PCIe Root Port. Adding a device link creates another dependency on its sibling: PCIe Root Port ^ ^ | | | | HDA ===> GPU The device link is not only used for runtime PM, it also guarantees that on system sleep, the HDA controller suspends before the GPU and resumes after the GPU, and on system shutdown the HDA controller's ->shutdown hook is executed before the one of the GPU. It is a complete solution. Using this functionality is as simple as calling device_link_add(), which results in a dmesg entry like this: pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 The code for the GPU-governed audio power management can thus be removed (except where it's still needed for legacy manual power control). The device link is added in a PCI quirk rather than in hda_intel.c. It is therefore legal for the GPU to runtime suspend to D3cold even if the HDA controller is not bound to a driver or if CONFIG_SND_HDA_INTEL is not enabled, for accesses to the HDA controller will cause the GPU to wake up regardless if they're occurring outside of hda_intel.c (think config space readout via sysfs). Contrary to the previous implementation, the HDA controller's power state is now self-governed, rather than GPU-governed, whereas the GPU's power state is no longer fully self-governed. (The HDA controller needs to runtime suspend before the GPU can.) It is thus crucial that runtime PM is always activated on the HDA controller even if CONFIG_SND_HDA_POWER_SAVE_DEFAULT is set to 0 (which is the default), lest the GPU stays awake. This is achieved by setting the auto_runtime_pm flag on every codec and the AZX_DCAPS_PM_RUNTIME flag on the HDA controller. A side effect is that power consumption might be reduced if the GPU is in use but the HDA controller is not, because the HDA controller is now allowed to go to D3hot. Before, it was forced to stay in D0 as long as the GPU was in use. (There is no reduction in power consumption on my Nvidia GK107, but there might be on other chips.) The code paths for legacy manual power control are adjusted such that runtime PM is disabled during power off, thereby preventing the PM core from resuming the HDA controller. Note that the device link is not only added on vga_switcheroo capable systems, but for *any* GPU with integrated HDA controller. The idea is that the HDA controller streams audio via connectors located on the GPU, so the GPU needs to be on for the HDA controller to do anything useful. This commit implicitly fixes an unbalanced runtime PM ref upon unbind of hda_intel.c: On ->probe, a runtime PM ref was previously released under the condition "azx_has_pm_runtime(chip) || hda->use_vga_switcheroo", but on ->remove a runtime PM ref was only acquired under the first of those conditions. Thus, binding and unbinding the driver twice on a vga_switcheroo capable system caused the runtime PM refcount to drop below zero. The issue is resolved because the AZX_DCAPS_PM_RUNTIME flag is now always set if use_vga_switcheroo is true. For more information on device links please refer to: https://www.kernel.org/doc/html/latest/driver-api/device_link.html Documentation/driver-api/device_link.rst Cc: Dave Airlie Cc: Ben Skeggs Cc: Alex Deucher Cc: Rafael J. Wysocki Acked-by: Bjorn Helgaas Reviewed-by: Takashi Iwai Reviewed-by: Peter Wu Tested-by: Kai Heng Feng # AMD PowerXpress Tested-by: Mike Lothian # AMD PowerXpress Tested-by: Denis Lisov # Nvidia Optimus Tested-by: Peter Wu # Nvidia Optimus Tested-by: Lukas Wunner # MacBook Pro Signed-off-by: Lukas Wunner Link: https://patchwork.freedesktop.org/patch/msgid/51bd38360ff502a8c42b1ebf4405ee1d3f27118d.1520068884.git.lukas@wunner.de Signed-off-by: Sasha Levin

radeon: insert 10ms sleep in dce5_crtc_load_lut

2020-02-28T15:36:08+00:00

[ Upstream commit ec3d65082d7dabad6fa8f66a8ef166f2d522d6b2 ] Per at least one tester this is enough magic to recover the regression introduced for some people (but not all) in commit b8e2b0199cc377617dc238f5106352c06dcd3fa2 Author: Peter Rosin Date: Tue Jul 4 12:36:57 2017 +0200 drm/fb-helper: factor out pseudo-palette which for radeon had the side-effect of refactoring out a seemingly redudant writing of the color palette. 10ms in a fairly slow modeset path feels like an acceptable form of duct-tape, so maybe worth a shot and see what sticks. Cc: Alex Deucher Cc: Michel Dänzer References: https://bugzilla.kernel.org/show_bug.cgi?id=198123 Signed-off-by: Daniel Vetter Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin