kernel/linux.git/drivers/gpu/drm/radeon/si.c, branch linux-4.7.y

drm/radeon: Allow setting shader registers using DMA/COPY packet3 on SI.

2016-05-05T00:23:15+00:00

Mesa uses a COPY_DATA packet to copy the grid size for indirect dispatches into COMPUTE_USER_DATA_*. Setting those registers with a SET_SH_REG packet is allowed, not allowing them with other packets seems like an oversight. v2: Clarify commit message. Signed-off-by: Bas Nieuwenhuizen Signed-off-by: Alex Deucher

drm/radeon: allow to force hard GPU reset.

2016-05-02T17:08:54+00:00

In some cases, like when freezing for hibernation, we need to be able to force hard reset even if no engine are stuck. This patch add a bool option to current asic reset callback to allow to force hard reset on asic that supports it. Reviewed-by: Christian König Signed-off-by: Jérôme Glisse Cc: Alex Deucher Cc: Christian König Signed-off-by: Alex Deucher

drm/radeon: consolidate si vce initialization and startup code.

2016-05-02T17:08:51+00:00

This match the exact same control flow as existing code. It just use goto instead of multiple levels of if/else. It also clarify early initialization failures by clearing rdev->has_vce doing so does not change end result from hardware point of view, it only avoids printing more error messages down the line and thus only the original error is reported. Acked-by: Christian König Signed-off-by: Jérôme Glisse Cc: Alex Deucher Cc: Christian König Signed-off-by: Alex Deucher

drm/radeon: consolidate si uvd initialization and startup code.

2016-05-02T17:08:49+00:00

This match the exact same control flow as existing code. It just use goto instead of multiple levels of if/else. It also clarify early initialization failures by clearing rdev->has_uvd doing so does not change end result from hardware point of view, it only avoids printing more error messages down the line and thus only the original error is reported. Acked-by: Christian König Signed-off-by: Jérôme Glisse Cc: Alex Deucher Cc: Christian König Signed-off-by: Alex Deucher

drm/radeon: fix indentation.

2016-03-16T22:08:06+00:00

I hate doing this but it hurts my eyes to go over code that does not comply with indentation rules. Only thing that is not only space change is in atom.c all other files are space indentation issues. Acked-by: Christian König Signed-off-by: Jérôme Glisse Cc: Alex Deucher Signed-off-by: Alex Deucher

drm/radeon: refactor SI tiling table initialization

2016-03-14T17:41:18+00:00

Simplify the control flow of si_tiling_mode_table_init() similar to how it was done in gfx_v7_0.c and gfx_v8_0.c. Signed-off-by: Josh Poimboeuf Signed-off-by: Alex Deucher

drm/radeon: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v2)

2015-12-04T18:11:41+00:00

commit 4dfd6486 "drm: Use vblank timestamps to guesstimate how many vblanks were missed" introduced in Linux 4.4-rc1 makes the drm core more fragile to drivers which don't update hw vblank counters and vblank timestamps in sync with firing of the vblank irq and essentially at leading edge of vblank. This exposed a problem with radeon-kms/amdgpu-kms which do not satisfy above requirements: The vblank irq fires a few scanlines before start of vblank, but programmed pageflips complete at start of vblank and vblank timestamps update at start of vblank, whereas the hw vblank counter increments only later, at start of vsync. This leads to problems like off by one errors for vblank counter updates, vblank counters apparently going backwards or vblank timestamps apparently having time going backwards. The net result is stuttering of graphics in games, or little hangs, as well as total failure of timing sensitive applications. See bug #93147 for an example of the regression on Linux 4.4-rc: https://bugs.freedesktop.org/show_bug.cgi?id=93147 This patch tries to align all above events better from the viewpoint of the drm core / of external callers to fix the problem: 1. The apparent start of vblank is shifted a few scanlines earlier, so the vblank irq now always happens after start of this extended vblank interval and thereby drm_update_vblank_count() always samples the updated vblank count and timestamp of the new vblank interval. To achieve this, the reporting of scanout positions by radeon_get_crtc_scanoutpos() now operates as if the vblank starts radeon_crtc->lb_vblank_lead_lines before the real start of the hw vblank interval. This means that the vblank timestamps which are based on these scanout positions will now update at this earlier start of vblank. 2. The driver->get_vblank_counter() function will bump the returned vblank count as read from the hw by +1 if the query happens after the shifted earlier start of the vblank, but before the real hw increment at start of vsync, so the counter appears to increment at start of vblank in sync with the timestamp update. 3. Calls from vblank irq-context and regular non-irq calls are now treated identical, always simulating the shifted vblank start, to avoid inconsistent results for queries happening from vblank irq vs. happening from drm_vblank_enable() or vblank_disable_fn(). 4. The radeon_flip_work_func will delay mmio programming a pageflip until the start of the real vblank iff it happens to execute inside the shifted earlier start of the vblank, so pageflips now also appear to execute at start of the shifted vblank, in sync with vblank counter and timestamp updates. This to avoid some races between updates of vblank count and timestamps that are used for swap scheduling and pageflip execution which could cause pageflips to execute before the scheduled target vblank. The lb_vblank_lead_lines "fudge" value is calculated as the size of the display controllers line buffer in scanlines for the given video mode: Vblank irq's are triggered by the line buffer logic when the line buffer refill for a video frame ends, ie. when the line buffer source read position enters the hw vblank. This means that a vblank irq could fire at most as many scanlines before the current reported scanout position of the crtc timing generator as the number of scanlines the line buffer can maximally hold for a given video mode. This patch has been successfully tested on a RV730 card with DCE-3 display engine and on a evergreen card with DCE-4 display engine, in single-display and dual-display configuration, with different video modes. A similar patch is needed for amdgpu-kms to fix the same problem. Limitations: - Line buffer sizes in pixels are hard-coded on < DCE-4 to a value i just guessed to be high enough to work ok, lacking info on the true sizes atm. Fixes: fdo#93147 Signed-off-by: Mario Kleiner Cc: Alex Deucher Cc: Michel Dänzer Cc: Harry Wentland Cc: Ville Syrjälä (v1) Tested-by: Dave Witbrodt (v2) Refine radeon_flip_work_func() for better efficiency: In radeon_flip_work_func, replace the busy waiting udelay(5) with event lock held by a more performance and energy efficient usleep_range() until at least predicted true start of hw vblank, with some slack for scheduler happiness. Release the event lock during waits to not delay other outputs in doing their stuff, as the waiting can last up to 200 usecs in some cases. Retested on DCE-3 and DCE-4 to verify it still works nicely. (v2) Signed-off-by: Mario Kleiner Signed-off-by: Alex Deucher

drm/radeon: Retry DDC probing on DVI on failure if we got an HPD interrupt

2015-12-04T18:09:12+00:00

HPD signals on DVI ports can be fired off before the pins required for DDC probing actually make contact, due to the pins for HPD making contact first. This results in a HPD signal being asserted but DDC probing failing, resulting in hotplugging occasionally failing. This is somewhat rare on most cards (depending on what angle you plug the DVI connector in), but on some cards it happens constantly. The Radeon R5 on the machine used for testing this patch for instance, runs into this issue just about every time I try to hotplug a DVI monitor and as a result hotplugging almost never works. Rescheduling the hotplug work for a second when we run into an HPD signal with a failing DDC probe usually gives enough time for the rest of the connector's pins to make contact, and fixes this issue. Reviewed-by: Christian König Signed-off-by: Lyude Signed-off-by: Alex Deucher

drm/radeon: Handle irqs only based on irq ring, not irq status regs.

2015-07-08T16:41:36+00:00

Trying to resolve issues with missed vblanks and impossible values inside delivered kms pageflip completion events showed that radeon's irq handling sometimes doesn't handle valid irqs, but silently skips them. This was observed for vblank interrupts. Although those irqs have corresponding events queued in the gpu's irq ring at time of interrupt, and therefore the corresponding handling code gets triggered by these events, the handling code sometimes silently skipped processing the irq. The reason for those skips is that the handling code double-checks for each irq event if the corresponding irq status bits in the irq status registers are set. Sometimes those bits are not set at time of check for valid irqs, maybe due to some hardware race on some setups? The problem only seems to happen on some machine + card combos sometimes, e.g., never happened during my testing of different PC cards of the DCE-2/3/4 generation a year ago, but happens consistently now on two different Apple Mac cards (RV730, DCE-3, Apple iMac and Evergreen JUNIPER, DCE-4 in a Apple MacPro). It also doesn't happen at each interrupt but only occassionally every couple of hundred or thousand vblank interrupts. This results in XOrg warning messages like "[ 7084.472] (WW) RADEON(0): radeon_dri2_flip_event_handler: Pageflip completion event has impossible msc 420120 < target_msc 420121" as well as skipped frames and problems for applications that use kms pageflip events or vblank events, e.g., users of DRI2 and DRI3/Present, Waylands Weston compositor, etc. See also https://bugs.freedesktop.org/show_bug.cgi?id=85203 After some talking to Alex and Michel, we decided to fix this by turning the double-check for asserted irq status bits into a warning. Whenever a irq event is queued in the IH ring, always execute the corresponding interrupt handler. Still check the irq status bits, but only to log a DRM_DEBUG message on a mismatch. This fixed the problems reliably on both previously failing cards, RV-730 dual-head tested on both crtcs (pipes D1 and D2) and a triple-output Juniper HD-5770 card tested on all three available crtcs (D1/D2/D3). The r600 and evergreen irq handling is therefore tested, but the cik an si handling is only compile tested due to lack of hw. Reviewed-by: Christian König Signed-off-by: Mario Kleiner CC: Michel Dänzer CC: Alex Deucher CC: # v3.16+ Signed-off-by: Alex Deucher

Merge tag 'v4.1-rc6' into drm-next

2015-06-03T23:23:51+00:00

Linux 4.1-rc6 backmerge 4.1-rc6 as some of the later pull reqs are based on newer bases and I'd prefer to do the fixup myself.