kernel/linux.git/drivers/gpu/drm/panfrost, branch v6.6.25

drm/panfrost: Ignore core_mask for poweroff and disable PWRTRANS irq

2024-01-25T23:35:34+00:00

[ Upstream commit a4f5892914ca7709ea6d191f0edace93a5935966 ] Some SoCs may be equipped with a GPU containing two core groups and this is exactly the case of Samsung's Exynos 5422 featuring an ARM Mali-T628 MP6 GPU: the support for this GPU in Panfrost is partial, as this driver currently supports using only one core group and that's reflected on all parts of it, including the power on (and power off, previously to this patch) function. The issue with this is that even though executing the soft reset operation should power off all cores unconditionally, on at least one platform we're seeing a crash that seems to be happening due to an interrupt firing which may be because we are calling power transition only on the first core group, leaving the second one unchanged, or because ISR execution was pending before entering the panfrost_gpu_power_off() function and executed after powering off the GPU cores, or all of the above. Finally, solve this by: - Avoid to enable the power transition interrupt on reset; and - Ignoring the core_mask and ask the GPU to poweroff both core groups Fixes: 22aa1a209018 ("drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()") Reviewed-by: Boris Brezillon Reviewed-by: Steven Price Signed-off-by: AngeloGioacchino Del Regno Tested-by: Marek Szyprowski Signed-off-by: Boris Brezillon Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-2-angelogioacchino.delregno@collabora.com Signed-off-by: Sasha Levin

drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()

2024-01-25T23:35:31+00:00

[ Upstream commit 22aa1a209018dc2eca78745f7666db63637cd5dc ] The layout of the registers {TILER,SHADER,L2}_PWROFF_LO, used to request powering off cores, is the same as the {TILER,SHADER,L2}_PWRON_LO ones: this means that in order to request poweroff of cores, we are supposed to write a bitmask of cores that should be powered off! This means that the panfrost_gpu_power_off() function has always been doing nothing. Fix powering off the GPU by writing a bitmask of the cores to poweroff to the relevant PWROFF_LO registers and then check that the transition (from ON to OFF) has finished by polling the relevant PWRTRANS_LO registers. While at it, in order to avoid code duplication, move the core mask logic from panfrost_gpu_power_on() to a new panfrost_get_core_mask() function, used in both poweron and poweroff. Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver") Signed-off-by: AngeloGioacchino Del Regno Reviewed-by: Steven Price Signed-off-by: Steven Price Link: https://patchwork.freedesktop.org/patch/msgid/20231102141507.73481-1-angelogioacchino.delregno@collabora.com Signed-off-by: Sasha Levin

Merge tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm

2023-08-30T20:34:34+00:00

Pull drm updates from Dave Airlie: "The drm core grew a new generic gpu virtual address manager, and new execution locking helpers. These are used by nouveau now to provide uAPI support for the userspace Vulkan driver. AMD had a bunch of new IP core support, loads of refactoring around fbdev, but mostly just the usual amount of stuff across the board. core: - fix gfp flags in drmm_kmalloc gpuva: - add new generic GPU VA manager (for nouveau initially) syncobj: - add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl dma-buf: - acquire resv lock for mmap() in exporters - support dma-buf self import automatically - docs fixes backlight: - fix fbdev interactions atomic: - improve logging prime: - remove struct gem_prim_mmap plus driver updates gem: - drm_exec: add locking over multiple GEM objects - fix lockdep checking fbdev: - make fbdev userspace interfaces optional - use linux device instead of fbdev device - use deferred i/o helper macros in various drivers - Make FB core selectable without drivers - Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT - Add helper macros and Kconfig tokens for DMA-allocated framebuffer ttm: - support init_on_free - swapout fixes panel: - panel-edp: Support AUO B116XAB01.4 - Support Visionox R66451 plus DT bindings - ld9040: - Backlight support - magic improved - Kconfig fix - Convert to of_device_get_match_data() - Fix Kconfig dependencies - simple: - Set bpc value to fix warning - Set connector type for AUO T215HVN01 - Support Innolux G156HCE-L01 plus DT bindings - ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings - startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings - sitronix-st7789v: - Support Inanbo T28CP45TN89 plus DT bindings - Support EDT ET028013DMA plus DT bindings - Various cleanups - edp: Add timings for N140HCA-EAC - Allow panels and touchscreens to power sequence together - Fix Innolux G156HCE-L01 LVDS clock bridge: - debugfs for chains support - dw-hdmi: - Improve support for YUV420 bus format - CEC suspend/resume - update EDID on HDMI detect - dw-mipi-dsi: Fix enable/disable of DSI controller - lt9611uxc: Use MODULE_FIRMWARE() - ps8640: Remove broken EDID code - samsung-dsim: Fix command transfer - tc358764: - Handle HS/VS polarity - Use BIT() macro - Various cleanups - adv7511: Fix low refresh rate - anx7625: - Switch to macros instead of hardcoded values - locking fixes - tc358767: fix hardware delays - sitronix-st7789v: - Support panel orientation - Support rotation property - Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings amdgpu: - SDMA 6.1.0 support - HDP 6.1 support - SMUIO 14.0 support - PSP 14.0 support - IH 6.1 support - Lots of checkpatch cleanups - GFX 9.4.3 updates - Add USB PD and IFWI flashing documentation - GPUVM updates - RAS fixes - DRR fixes - FAMS fixes - Virtual display fixes - Soft IH fixes - SMU13 fixes - Rework PSP firmware loading for other IPs - Kernel doc fixes - DCN 3.0.1 fixes - LTTPR fixes - DP MST fixes - DCN 3.1.6 fixes - SMU 13.x fixes - PSP 13.x fixes - SubVP fixes - GC 9.4.3 fixes - Display bandwidth calculation fixes - VCN4 secure submission fixes - Allow building DC on RISC-V - Add visible FB info to bo_print_info - HBR3 fixes - GFX9 MCBP fix - GMC10 vmhub index fix - GMC11 vmhub index fix - Create a new doorbell manager - SR-IOV fixes - initial freesync panel replay support - revert zpos properly until igt regression is fixeed - use TTM to manage doorbell BAR - Expose both current and average power via hwmon if supported amdkfd: - Cleanup CRIU dma-buf handling - Use KIQ to unmap HIQ - GFX 9.4.3 debugger updates - GFX 9.4.2 debugger fixes - Enable cooperative groups fof gfx11 - SVM fixes - Convert older APUs to use dGPU path like newer APUs - Drop IOMMUv2 path as it is no longer used - TBA fix for aldebaran i915: - ICL+ DSI modeset sequence - HDCP improvements - MTL display fixes and cleanups - HSW/BDW PSR1 restored - Init DDI ports in VBT order - General display refactors - Start using plane scale factor for relative data rate - Use shmem for dpt objects - Expose RPS thresholds in sysfs - Apply GuC SLPC min frequency softlimit correctly - Extend Wa_14015795083 to TGL, RKL, DG1 and ADL - Fix a VMA UAF for multi-gt platform - Do not use stolen on MTL due to HW bug - Check HuC and GuC version compatibility on MTL - avoid infinite GPU waits due to premature release of request memory - Fixes and updates for GSC memory allocation - Display SDVO fixes - Take stolen handling out of FBC code - Make i915_coherent_map_type GT-centric - Simplify shmem_create_from_object map_type msm: - SM6125 MDSS support - DPU: SM6125 DPU support - DSI: runtime PM support, burst mode support - DSI PHY: SM6125 support in 14nm DSI PHY driver - GPU: prepare for a7xx - fix a690 firmware - disable relocs on a6xx and newer radeon: - Lots of checkpatch cleanups ast: - improve device-model detection - Represent BMV as virtual connector - Report DP connection status nouveau: - add new exec/bind interface to support Vulkan - document some getparam ioctls - improve VRAM detection - various fixes/cleanups - workraound DPCD issues ivpu: - MMU updates - debugfs support - Support vpu4 virtio: - add sync object support atmel-hlcdc: - Support inverted pixclock polarity etnaviv: - runtime PM cleanups - hang handling fixes exynos: - use fbdev DMA helpers - fix possible NULL ptr dereference komeda: - always attach encoder omapdrm: - use fbdev DMA helpers ingenic: - kconfig regmap fixes loongson: - support display controller mediatek: - Small mtk-dpi cleanups - DisplayPort: support eDP and aux-bus - Fix coverity issues - Fix potential memory leak if vmap() fail mgag200: - minor fixes mxsfb: - support disabling overlay planes panfrost: - fix sync in IRQ handling ssd130x: - Support per-controller default resolution plus DT bindings - Reduce memory-allocation overhead - Improve intermediate buffer size computation - Fix allocation of temporary buffers - Fix pitch computation - Fix shadow plane allocation tegra: - use fbdev DMA helpers - Convert to devm_platform_ioremap_resource() - support bridge/connector - enable PM tidss: - Support TI AM625 plus DT bindings - Implement new connector model plus driver updates vkms: - improve write back support - docs fixes - support gamma LUT zynqmp-dpsub: - misc fixes" * tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits) drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map() drm/tests/drm_kunit_helpers: Place correct function name in the comment header drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly drm/nouveau: uvmm: fix unset region pointer on remap drm/nouveau: sched: avoid job races between entities drm/i915: Fix HPD polling, reenabling the output poll work as needed drm: Add an HPD poll helper to reschedule the poll work drm/i915: Fix TLB-Invalidation seqno store drm/ttm/tests: Fix type conversion in ttm_pool_test drm/msm/a6xx: Bail out early if setting GPU OOB fails drm/msm/a6xx: Move LLC accessors to the common header drm/msm/a6xx: Introduce a6xx_llc_read drm/ttm/tests: Require MMU when testing drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0"" drm/amdgpu: Add memory vendor information drm/amd: flush any delayed gfxoff on suspend entry drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix drm/amdgpu: Remove gfxoff check in GFX v9.4.3 drm/amd/pm: Update pci link speed for smu v13.0.6 ...

drm/panfrost: Skip speed binning on EOPNOTSUPP

2023-08-21T14:38:54+00:00

Encountered on an ARM Mali-T760 MP4, attempting to read the nvmem variable can also return EOPNOTSUPP instead of ENOENT when speed binning is unsupported. Cc: Fixes: 7d690f936e9b ("drm/panfrost: Add basic support for speed binning") Signed-off-by: David Michael Reviewed-by: Steven Price Signed-off-by: Steven Price Link: https://patchwork.freedesktop.org/patch/msgid/87msyryd7y.fsf@gmail.com

drm/panfrost: Sync IRQ by job's timeout handler

2023-08-10T06:41:21+00:00

Panfrost IRQ handler may stuck for a long time, for example this happens when there is a bad HDMI connection and HDMI handler takes a long time to finish processing, holding Panfrost. Make Panfrost's job timeout handler to sync IRQ before checking fence signal status in order to prevent spurious job timeouts due to a slow IRQ processing. Reviewed-by: Steven Price Reviewed-by: Boris Brezillon Reviewed-by: AngeloGioacchino Del Regno Tested-by: AngeloGioacchino Del Regno # MediaTek MT8192 and MT8195 Chromebooks Signed-off-by: Dmitry Osipenko Signed-off-by: Boris Brezillon Link: https://patchwork.freedesktop.org/patch/msgid/20230807000444.14926-1-dmitry.osipenko@collabora.com

drm: Explicitly include correct DT includes

2023-07-21T07:12:43+00:00

The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring Acked-by: Sam Ravnborg Reviewed-by: Steven Price Acked-by: Liviu Dudau Reviewed-by: Kieran Bingham Acked-by: Robert Foss Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org

drm: Clear fd/handle callbacks in struct drm_driver

2023-06-26T09:08:41+00:00

Clear all assignments of struct drm_driver's fd/handle callbacks to drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd(). These functions are called by default. Add a TODO item to convert vmwgfx to the defaults as well. v2: * remove TODO item (Zack) * also update amdgpu's amdgpu_partition_driver Signed-off-by: Thomas Zimmermann Reviewed-by: Simon Ser Acked-by: Alex Deucher Acked-by: Jeffrey Hugo # qaic Link: https://patchwork.freedesktop.org/patch/msgid/20230620080252.16368-3-tzimmermann@suse.de

drm/shmem-helper: Switch to reservation lock

2023-06-21T17:22:20+00:00

Replace all drm-shmem locks with a GEM reservation lock. This makes locks consistent with dma-buf locking convention where importers are responsible for holding reservation lock for all operations performed over dma-bufs, preventing deadlock between dma-buf importers and exporters. Suggested-by: Daniel Vetter Acked-by: Thomas Zimmermann Reviewed-by: Emil Velikov Signed-off-by: Dmitry Osipenko Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-7-dmitry.osipenko@collabora.com

drm: Remove struct drm_driver.gem_prime_mmap

2023-06-19T11:56:40+00:00

All drivers initialize this field with drm_gem_prime_mmap(). Call the function directly and remove the field. Simplifies the code and resolves a long-standing TODO item. Signed-off-by: Thomas Zimmermann Reviewed-by: Alex Deucher Link: https://patchwork.freedesktop.org/patch/msgid/20230613150441.17720-3-tzimmermann@suse.de

drm/panfrost: Convert to platform remove callback returning void

2023-06-08T16:04:12+00:00

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Reviewed-by: Steven Price Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-37-u.kleine-koenig@pengutronix.de