kernel/linux.git/drivers/gpu/drm/panel, branch v6.6.40

drm/panel: simple: Add missing display timing flags for KOE TX26D202VM0BWA

2024-07-05T07:33:53+00:00

[ Upstream commit 37ce99b77762256ec9fda58d58fd613230151456 ] KOE TX26D202VM0BWA panel spec indicates the DE signal is active high in timing chart, so add DISPLAY_FLAGS_DE_HIGH flag in display timing flags. This aligns display_timing with panel_desc. Fixes: 8a07052440c2 ("drm/panel: simple: Add support for KOE TX26D202VM0BWA panel") Signed-off-by: Liu Ying Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240624015612.341983-1-victor.liu@nxp.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240624015612.341983-1-victor.liu@nxp.com Signed-off-by: Sasha Levin

drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep

2024-07-05T07:33:50+00:00

[ Upstream commit ee7860cd8b5763017f8dc785c2851fecb7a0c565 ] The ilitek-ili9881c controls the reset GPIO using the non-sleeping gpiod_set_value() function. This complains loudly when the GPIO controller needs to sleep. As the caller can sleep, use gpiod_set_value_cansleep() to fix the issue. Signed-off-by: Laurent Pinchart Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240317154839.21260-1-laurent.pinchart@ideasonboard.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240317154839.21260-1-laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin

drm/panel: sitronix-st7789v: Add check for of_drm_get_panel_orientation

2024-06-21T12:38:29+00:00

[ Upstream commit 629f2b4e05225e53125aaf7ff0b87d5d53897128 ] Add check for the return value of of_drm_get_panel_orientation() and return the error if it fails in order to catch the error. Fixes: b27c0f6d208d ("drm/panel: sitronix-st7789v: add panel orientation support") Signed-off-by: Chen Ni Reviewed-by: Michael Riesch Acked-by: Jessica Zhang Link: https://lore.kernel.org/r/20240528030832.2529471-1-nichen@iscas.ac.cn Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240528030832.2529471-1-nichen@iscas.ac.cn Signed-off-by: Sasha Levin

drm/panel: sitronix-st7789v: fix display size for jt240mhqs_hwt_ek_e3 panel

2024-06-12T09:13:00+00:00

[ Upstream commit b62c150c3bae72ac1910dcc588f360159eb0744a ] This is a portrait mode display. Change the dimensions accordingly. Fixes: 0fbbe96bfa08 ("drm/panel: sitronix-st7789v: add jasonic jt240mhqs-hwt-ek-e3 support") Signed-off-by: Gerald Loacker Acked-by: Jessica Zhang Link: https://lore.kernel.org/r/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-3-e4821802443d@wolfvision.net Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-3-e4821802443d@wolfvision.net Signed-off-by: Sasha Levin

drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel

2024-06-12T09:13:00+00:00

[ Upstream commit 2ba50582634d0bfe3a333ab7575a7f0122a7cde8 ] Use the default timing parameters to get a refresh rate of about 60 Hz for a clock of 6 MHz. Fixes: 0fbbe96bfa08 ("drm/panel: sitronix-st7789v: add jasonic jt240mhqs-hwt-ek-e3 support") Signed-off-by: Gerald Loacker Acked-by: Jessica Zhang Link: https://lore.kernel.org/r/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-2-e4821802443d@wolfvision.net Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-2-e4821802443d@wolfvision.net Signed-off-by: Sasha Levin

drm/panel: sitronix-st7789v: fix timing for jt240mhqs_hwt_ek_e3 panel

2024-06-12T09:13:00+00:00

[ Upstream commit 0e5895ff7fab0fc05ec17daf9a568368828fa6ea ] Flickering was observed when using partial mode. Moving the vsync to the same position as used by the default sitronix-st7789v timing resolves this issue. Fixes: 0fbbe96bfa08 ("drm/panel: sitronix-st7789v: add jasonic jt240mhqs-hwt-ek-e3 support") Acked-by: Jessica Zhang Signed-off-by: Gerald Loacker Link: https://lore.kernel.org/r/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-1-e4821802443d@wolfvision.net Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-1-e4821802443d@wolfvision.net Signed-off-by: Sasha Levin

drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connector

2024-06-12T09:12:04+00:00

[ Upstream commit 11ac72d033b9f577e8ba0c7a41d1c312bb232593 ] The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , add the missing bus_format. Add missing connector type and bus_flags as well. Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is capable of both RGB 18bit/24bit panel, the current configuration uses 18bit mode, .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , .bpc = 6. Support for the 24bit mode would require another entry in panel-simple with .bus_format = MEDIA_BUS_FMT_RGB666_1X7X4_SPWG and .bpc = 8, which is out of scope of this fix. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf Fixes: f8fa17ba812b ("drm/panel: simple: Add support for Innolux G121X1-L03") Signed-off-by: Marek Vasut Acked-by: Jessica Zhang Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-2-marex@denx.de Signed-off-by: Sasha Levin

drm/panel: novatek-nt35950: Don't log an error when DSI host can't be found

2024-06-12T09:12:04+00:00

[ Upstream commit 5ff5505b9a2d827cae3f95dceba258c963138175 ] Given that failing to find a DSI host causes the driver to defer probe, make use of dev_err_probe() to log the reason. This makes the defer probe reason available and avoids alerting userspace about something that is not necessarily an error. Fixes: 623a3531e9cf ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels") Suggested-by: AngeloGioacchino Del Regno Reviewed-by: Laurent Pinchart Signed-off-by: Nícolas F. R. A. Prado Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20240415-anx7625-defer-log-no-dsi-host-v3-8-619a28148e5c@collabora.com Signed-off-by: Sasha Levin

drm/panel: atna33xc20: Fix unbalanced regulator in the case HPD doesn't assert

2024-06-12T09:11:57+00:00

[ Upstream commit 5e842d55bad7794823a50f24fd645b58f2ef93ab ] When the atna33xc20 driver was first written the resume code never returned an error. If there was a problem waiting for HPD it just printed a warning and moved on. This changed in response to review feedback [1] on a future patch but I accidentally didn't account for rolling back the regulator enable in the error cases. Do so now. [1] https://lore.kernel.org/all/5f3cf3a6-1cc2-63e4-f76b-4ee686764705@linaro.org/ Fixes: 3b5765df375c ("drm/panel: atna33xc20: Take advantage of wait_hpd_asserted() in struct drm_dp_aux") Acked-by: Jessica Zhang Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20240313-homestarpanel-regulator-v1-1-b8e3a336da12@chromium.org Signed-off-by: Sasha Levin

drm/dp: Don't attempt AUX transfers when eDP panels are not powered

2024-06-12T09:11:57+00:00

[ Upstream commit 8df1ddb5bf11ab820ad991e164dab82c0960add9 ] If an eDP panel is not powered on then any attempts to talk to it over the DP AUX channel will timeout. Unfortunately these attempts may be quite slow. Userspace can initiate these attempts either via a /dev/drm_dp_auxN device or via the created i2c device. Making the DP AUX drivers timeout faster is a difficult proposition. In theory we could just poll the panel's HPD line in the AUX transfer function and immediately return an error there. However, this is easier said than done. For one thing, there's no hard requirement to hook the HPD line up for eDP panels and it's OK to just delay a fixed amount. For another thing, the HPD line may not be fast to probe. On parade-ps8640 we need to wait for the bridge chip's firmware to boot before we can get the HPD line and this is a slow process. The fact that the transfers are taking so long to timeout is causing real problems. The open source fwupd daemon sometimes scans DP busses looking for devices whose firmware need updating. If it happens to scan while a panel is turned off this scan can take a long time. The fwupd daemon could try to be smarter and only scan when eDP panels are turned on, but we can also improve the behavior in the kernel. Let's let eDP panels drivers specify that a panel is turned off and then modify the common AUX transfer code not to attempt a transfer in this case. Tested-by: Steev Klimaszewski Reviewed-by: Hsin-Yi Wang Tested-by: Eizan Miyamoto Acked-by: Neil Armstrong Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20240202141109.1.I24277520ac754ea538c9b14578edc94e1df11b48@changeid Stable-dep-of: 5e842d55bad7 ("drm/panel: atna33xc20: Fix unbalanced regulator in the case HPD doesn't assert") Signed-off-by: Sasha Levin