kernel/linux.git/drivers/gpu/drm/panel, branch v6.6.12

drm/panel: nt36523: fix return value check in nt36523_probe()

2023-12-08T07:52:24+00:00

[ Upstream commit fb18fe0fdf22a2f4512a8b644bb5ea1473829cda ] mipi_dsi_device_register_full() never returns NULL pointer, it will return ERR_PTR() when it fails, so replace the check with IS_ERR(). Fixes: 0993234a0045 ("drm/panel: Add driver for Novatek NT36523") Signed-off-by: Yang Yingliang Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20231129090715.856263-1-yangyingliang@huaweicloud.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231129090715.856263-1-yangyingliang@huaweicloud.com Signed-off-by: Sasha Levin

drm/panel: starry-2081101qfh032011-53g: Fine tune the panel power sequence

2023-12-08T07:52:24+00:00

[ Upstream commit fc1ccc16271a0526518f19f460fed63d575a8a42 ] For the "starry, 2081101qfh032011-53g" panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Fixes: 6069b66cd962 ("drm/panel: support for STARRY 2081101QFH032011-53G MIPI-DSI panel") Signed-off-by: xiazhengqiao Reviewed-by: Jessica Zhang Link: https://lore.kernel.org/r/20231129084115.7918-1-xiazhengqiao@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231129084115.7918-1-xiazhengqiao@huaqin.corp-partner.google.com Signed-off-by: Sasha Levin

drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP

2023-12-03T06:33:04+00:00

[ Upstream commit cea7008190ad65b4aaae6e94667a358d2c10a696 ] The refresh reported by modetest is 60.46Hz, and the actual measurement is 60.01Hz, which is outside the expected tolerance. Adjust hporch and pixel clock to fix it. After repair, modetest and actual measurement were all 60.01Hz. Modetest refresh = Pixel CLK/ htotal* vtotal, but measurement frame rate is HS->LP cycle time(Vblanking). Measured frame rate is not only affecte by Htotal/Vtotal/pixel clock, also affected by Lane-num/PixelBit/LineTime /DSI CLK. Assume that the DSI controller could not make the mode that we requested(presumably it's PLL couldn't generate the exact pixel clock?). If you use a different DSI controller, you may need to readjust these parameters. Now this panel looks like it's only used by me on the MTK platform, so let's change this set of parameters. Fixes: 1bc2ef065f13 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel") Signed-off-by: Cong Yang Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20231120020109.3216343-1-yangcong5@huaqin.corp-partner.google.com Signed-off-by: Sasha Levin

drm/panel: simple: Fix Innolux G101ICE-L01 timings

2023-12-03T06:33:03+00:00

[ Upstream commit 3f9a91b6c00e655d27bd785dcda1742dbdc31bda ] The Innolux G101ICE-L01 datasheet [1] page 17 table 6.1 INPUT SIGNAL TIMING SPECIFICATIONS indicates that maximum vertical blanking time is 40 lines. Currently the driver uses 29 lines. Fix it, and since this panel is a DE panel, adjust the timings to make them less hostile to controllers which cannot do 1 px HSA/VSA, distribute the delays evenly between all three parts. [1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut Reviewed-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de Signed-off-by: Sasha Levin

drm/panel: simple: Fix Innolux G101ICE-L01 bus flags

2023-12-03T06:33:03+00:00

[ Upstream commit 06fc41b09cfbc02977acd9189473593a37d82d9b ] Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description, ones which match both the datasheet and the panel display_timing flags . Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut Reviewed-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de Signed-off-by: Sasha Levin

drm/panel: auo,b101uan08.3: Fine tune the panel power sequence

2023-12-03T06:33:03+00:00

[ Upstream commit 6965809e526917b73c8f9178173184dcf13cec4b ] For "auo,b101uan08.3" this panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Fixes: 56ad624b4cb5 ("drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel") Signed-off-by: Xuxin Xiong Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20231114044205.613421-1-xuxinxiong@huaqin.corp-partner.google.com Signed-off-by: Sasha Levin

drm/panel: st7703: Pick different reset sequence

2023-11-28T17:19:41+00:00

[ Upstream commit d12d635bb03c7cb4830acb641eb176ee9ff2aa89 ] Switching to a different reset sequence, enabling IOVCC before enabling VCC. There also needs to be a delay after enabling the supplies and before deasserting the reset. The datasheet specifies 1ms after the supplies reach the required voltage. Use 10-20ms to also give the power supplies some time to reach the required voltage, too. This fixes intermittent panel initialization failures and screen corruption during resume from sleep on panel xingbangda,xbd599 (e.g. used in PinePhone). Signed-off-by: Ondrej Jirman Signed-off-by: Frank Oltmanns Reported-by: Samuel Holland Reviewed-by: Guido Günther Tested-by: Guido Günther Signed-off-by: Guido Günther Link: https://patchwork.freedesktop.org/patch/msgid/20230211171748.36692-2-frank@oltmanns.dev Signed-off-by: Sasha Levin

drm/panel/panel-tpo-tpg110: fix a possible null pointer dereference

2023-11-28T17:19:41+00:00

[ Upstream commit f22def5970c423ea7f87d5247bd0ef91416b0658 ] In tpg110_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. Signed-off-by: Ma Ke Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20231009090446.4043798-1-make_ruc2021@163.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231009090446.4043798-1-make_ruc2021@163.com Signed-off-by: Sasha Levin

drm/panel: fix a possible null pointer dereference

2023-11-28T17:19:41+00:00

[ Upstream commit 924e5814d1f84e6fa5cb19c6eceb69f066225229 ] In versatile_panel_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. Signed-off-by: Ma Ke Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20231007033105.3997998-1-make_ruc2021@163.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231007033105.3997998-1-make_ruc2021@163.com Signed-off-by: Sasha Levin

drm/panel: Move AUX B116XW03 out of panel-edp back to panel-simple

2023-10-12T16:25:00+00:00

In commit 5f04e7ce392d ("drm/panel-edp: Split eDP panels out of panel-simple") I moved a pile of panels out of panel-simple driver into the newly created panel-edp driver. One of those panels, however, shouldn't have been moved. As is clear from commit e35e305eff0f ("drm/panel: simple: Add AUO B116XW03 panel support"), AUX B116XW03 is an LVDS panel. It's used in exynos5250-snow and exynos5420-peach-pit where it's clear that the panel is hooked up with LVDS. Furthermore, searching for datasheets I found one that makes it clear that this panel is LVDS. As far as I can tell, I got confused because in commit 88d3457ceb82 ("drm/panel: auo,b116xw03: fix flash backlight when power on") Jitao Shi added "DRM_MODE_CONNECTOR_eDP". That seems wrong. Looking at the downstream ChromeOS trees, it seems like some Mediatek boards are using a panel that they call "auo,b116xw03" that's an eDP panel. The best I can guess is that they actually have a different panel that has similar timing. If so then the proper panel should be used or they should switch to the generic "edp-panel" compatible. When moving this back to panel-edp, I wasn't sure what to use for .bus_flags and .bus_format and whether to add the extra "enable" delay from commit 88d3457ceb82 ("drm/panel: auo,b116xw03: fix flash backlight when power on"). I've added formats/flags/delays based on my (inexpert) analysis of the datasheet. These are untested. NOTE: if/when this is backported to stable, we might run into some trouble. Specifically, before 474c162878ba ("arm64: dts: mt8183: jacuzzi: Move panel under aux-bus") this panel was used by "mt8183-kukui-jacuzzi", which assumed it was an eDP panel. I don't know what to suggest for that other than someone making up a bogus panel for jacuzzi that's just for the stable channel. Fixes: 88d3457ceb82 ("drm/panel: auo,b116xw03: fix flash backlight when power on") Fixes: 5f04e7ce392d ("drm/panel-edp: Split eDP panels out of panel-simple") Tested-by: Anton Bambura Acked-by: Hsin-Yi Wang Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20230925150010.1.Iff672233861bcc4cf25a7ad0a81308adc3bda8a4@changeid