kernel/linux.git/drivers/gpu/drm/panel, branch v6.18.34

drm/panel: simple: Correct G190EAN01 prepare timing

2026-05-23T11:06:37+00:00

[ Upstream commit f1080f82570b797598c1ba7e9c800ae9e94aafc6 ] The prepare timing specified by the G190EAN01 datasheet should be between 30 and 50 ms. Considering it might take some time for the LVDS encoder to enable the signal, we should only wait the min. required time in the panel driver and not the max. allowed time. Fixes: 2f7b832fc992 ("drm/panel: simple: Add support for AUO G190EAN01 panel") Signed-off-by: Sebastian Reichel Signed-off-by: Ian Ray Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patch.msgid.link/20260217142528.68613-1-ian.ray@gehealthcare.com Signed-off-by: Sasha Levin

drm/panel: sharp-ls043t1le01: make use of prepare_prev_first

2026-05-23T11:06:37+00:00

[ Upstream commit c222177d7c7e1b2e0433d9e47ec2da7015345d50 ] The DSI link must be powered up to let panel driver to talk to the panel during prepare() callback execution. Set the prepare_prev_first flag to guarantee this. Fixes: 9e15123eca79 ("drm/msm/dsi: Stop unconditionally powering up DSI hosts at modeset") Signed-off-by: Dmitry Baryshkov Reviewed-by: Douglas Anderson Signed-off-by: Neil Armstrong Link: https://patch.msgid.link/20260323-panel-fix-v1-1-9f12b09161e8@oss.qualcomm.com Signed-off-by: Sasha Levin

drm/panel: boe-tv101wum-nl6: restore MODE_LPM after sending disable cmds

2026-05-17T15:15:33+00:00

commit 570cf799e87ae805eacfab3b4ba66676b5fccdb6 upstream. When preparing the panel, it seems that it always expects commands to be transferred in LP mode. However, the disable function removes the MIPI_DSI_MODE_LPM flag, and no other function re-adds it. As the unprepare function contains no DSI commands, re-adding the flag just after disabling the panel should be safe. Add the code re-adding the flag after the two commands for disabling the panel are sent. This fixes error messages shown in kernel log when unblanking on mt8183-kukui-kodama-sku32 device. Cc: stable@vger.kernel.org Fixes: a869b9db7adf ("drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel") Signed-off-by: Icenowy Zheng Reviewed-by: Neil Armstrong Reviewed-by: Douglas Anderson Signed-off-by: Neil Armstrong Link: https://patch.msgid.link/20260503091708.1079962-1-zhengxingda@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman

drm/panel: himax-hx83102: restore MODE_LPM after sending disable cmds

2026-05-17T15:15:33+00:00

commit 2d4e80271f784aa0c7b17676e9762c7e8156be1c upstream. When preparing the panel, it seems that it always expects commands to be transferred in LP mode. However, the disable function removes the MIPI_DSI_MODE_LPM flag, and no other function re-adds it. As the unprepare function contains no DSI commands, re-adding the flag just after disabling the panel should be safe. Add the code re-adding the flag after the two commands for disabling the panel are sent. This fixes screen unblanking (after blanking once) on mt8188-geralt-ciri-sku1 device. Cc: stable@vger.kernel.org # 6.11+ Fixes: 0ef94554dc40 ("drm/panel: himax-hx83102: Break out as separate driver") Signed-off-by: Icenowy Zheng Reviewed-by: Neil Armstrong Reviewed-by: Douglas Anderson Signed-off-by: Neil Armstrong Link: https://patch.msgid.link/20260425165751.1716569-1-zhengxingda@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman

drm/panel: Fix a possible null-pointer dereference in jdi_panel_dsi_remove()

2026-03-04T12:19:56+00:00

[ Upstream commit 95eed73b871111123a8b1d31cb1fce7e902e49ea ] In jdi_panel_dsi_remove(), jdi is explicitly checked, indicating that it may be NULL: if (!jdi) mipi_dsi_detach(dsi); However, when jdi is NULL, the function does not return and continues by calling jdi_panel_disable(): err = jdi_panel_disable(&jdi->base); Inside jdi_panel_disable(), jdi is dereferenced unconditionally, which can lead to a NULL-pointer dereference: struct jdi_panel *jdi = to_panel_jdi(panel); backlight_disable(jdi->backlight); To prevent such a potential NULL-pointer dereference, return early from jdi_panel_dsi_remove() when jdi is NULL. Signed-off-by: Tuo Li Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patch.msgid.link/20251218120955.11185-1-islituo@gmail.com Signed-off-by: Sasha Levin

drm/panel: edp: add BOE NV140WUM-T08 panel

2026-03-04T12:19:52+00:00

[ Upstream commit 349d4efadc1f831ebc0b872ba1e3a2b7dd58b72b ] Add powerseq timing info for the BOE NV140WUM-T08 panel used on Lenovo Thinkpad T14s gen 6 (Snapdragon X1 Elite) laptops. edid-decode (hex): 00 ff ff ff ff ff ff 00 09 e5 26 0c 00 00 00 00 0a 21 01 04 a5 1e 13 78 03 d6 62 99 5e 5a 8e 27 25 53 58 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 33 3f 80 dc 70 b0 3c 40 30 20 36 00 2e bc 10 00 00 1a 00 00 00 fd 00 28 3c 4c 4c 10 01 0a 20 20 20 20 20 20 00 00 00 fe 00 42 4f 45 20 43 51 0a 20 20 20 20 20 20 00 00 00 fe 00 4e 56 31 34 30 57 55 4d 2d 54 30 38 0a 00 fa Signed-off-by: Hans de Goede Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://patch.msgid.link/20260105155134.83266-1-johannes.goede@oss.qualcomm.com Signed-off-by: Sasha Levin

drm/panel-edp: Add AUO B140QAX01.H panel

2026-03-04T12:19:47+00:00

[ Upstream commit bcd752c706c357229185a330ab450b86236d9031 ] A 14-inch 2560x1600 60Hz matte touch panel, found on a Dell Latitude 7455 laptop (second-source with BOE NE14QDM), according to online sources it's also found on the Latitude 7440 and some ASUS models. Raw EDID dump: 00 ff ff ff ff ff ff 00 06 af a4 0b 00 00 00 00 00 20 01 04 a5 1e 13 78 03 ad f5 a8 54 47 9c 24 0e 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 f0 68 00 a0 a0 40 2e 60 30 20 35 00 2d bc 10 00 00 1a f3 53 00 a0 a0 40 2e 60 30 20 35 00 2d bc 10 00 00 1a 00 00 00 fe 00 36 39 52 31 57 80 42 31 34 30 51 41 58 00 00 00 00 00 02 41 21 a8 00 01 00 00 1a 41 0a 20 20 00 a1 Don't have datasheet access, but the same timing as for other panels from the same manufacturer works fine. Signed-off-by: Val Packett [dianders: Moved to the right location in the table] Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://patch.msgid.link/20251206173739.2222940-1-val@packett.cool Signed-off-by: Sasha Levin

gpu/panel-edp: add AUO panel entry for B140HAN06.4

2026-03-04T12:19:46+00:00

[ Upstream commit 2976aeb0de77da599ad37691963efbdcb07435ce ] Add an eDP panel entry for AUO B140HAN06.4 that is also used in some variants of Lenovo Flex 5G with Qcom SC8180 SoC. The raw edid of the panel is: 00 ff ff ff ff ff ff 00 06 af 3d 64 00 00 00 00 2b 1d 01 04 a5 1f 11 78 03 b8 1a a6 54 4a 9b 26 0e 52 55 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 14 37 80 b8 70 38 24 40 10 10 3e 00 35 ae 10 00 00 18 10 2c 80 b8 70 38 24 40 10 10 3e 00 35 ae 10 00 00 18 00 00 00 fe 00 41 55 4f 0a 20 20 20 20 20 20 20 20 20 00 00 00 fe 00 42 31 34 30 48 41 4e 30 36 2e 34 20 0a 00 eb I do not have access to the datasheet and but it is tested on above mentioned laptop for a few weeks and seems to work just fine with timing info of similar panels. Cc: Bjorn Andersson Cc: Vinod Koul Signed-off-by: Alexey Klimov Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://patch.msgid.link/20251203074555.690613-1-alexey.klimov@linaro.org Signed-off-by: Sasha Levin

drm/panel: sw43408: Remove manual invocation of unprepare at remove

2026-02-26T22:59:11+00:00

[ Upstream commit cbc1e99a9e0a6c8b22ddcbb40ca37457066f9493 ] The drm_panel_remove should take care of disable/unprepare. Remove the manual call from the sw43408_remove function. Fixes: 069a6c0e94f9 ("drm: panel: Add LG sw43408 panel driver") Reviewed-by: Dmitry Baryshkov Signed-off-by: David Heidelberg Signed-off-by: Neil Armstrong Link: https://patch.msgid.link/20251214-pixel-3-v7-5-b1c0cf6f224d@ixit.cz Signed-off-by: Sasha Levin

drm/panel: simple: restore connector_type fallback

2026-01-23T10:21:31+00:00

commit 9380dc33cd6ae4a6857818fcefce31cf716f3fae upstream. The switch from devm_kzalloc() + drm_panel_init() to devm_drm_panel_alloc() introduced a regression. Several panel descriptors do not set connector_type. For those panels, panel_simple_probe() used to compute a connector type (currently DPI as a fallback) and pass that value to drm_panel_init(). After the conversion to devm_drm_panel_alloc(), the call unconditionally used desc->connector_type instead, ignoring the computed fallback and potentially passing DRM_MODE_CONNECTOR_Unknown, which drm_panel_bridge_add() does not allow. Move the connector_type validation / fallback logic before the devm_drm_panel_alloc() call and pass the computed connector_type to devm_drm_panel_alloc(), so panels without an explicit connector_type once again get the DPI default. Signed-off-by: Ludovic Desroches Fixes: de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()") Cc: stable@vger.kernel.org Reviewed-by: Luca Ceresoli Link: https://lore.kernel.org/stable/20251126-lcd_panel_connector_type_fix-v2-1-c15835d1f7cb%40microchip.com Signed-off-by: Neil Armstrong Link: https://patch.msgid.link/20251218-lcd_panel_connector_type_fix-v3-1-ddcea6d8d7ef@microchip.com Signed-off-by: Greg Kroah-Hartman