kernel/linux.git/drivers/gpu/drm/panel, branch v6.1.87

drm/panel-edp: use put_sync in unprepare

2024-03-26T22:20:44+00:00

[ Upstream commit 49ddab089611ae5ddd0201ddbbf633da75bfcc25 ] Some edp panel requires T10 (Delay from end of valid video data transmitted by the Source device to power-off) less than 500ms. Using autosuspend with delay set as 1000 violates this requirement. Use put_sync_suspend in unprepare to meet the spec. For other cases (such as getting EDID), it still uses autosuspend. Suggested-by: Douglas Anderson Fixes: 3235b0f20a0a ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare") Signed-off-by: Hsin-Yi Wang Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20231220221418.2610185-1-hsinyi@chromium.org Signed-off-by: Sasha Levin

drm/panel-edp: Add override_edid_mode quirk for generic edp

2024-02-05T20:12:54+00:00

[ Upstream commit 9f7843b515811aea6c56527eb195b622e9c01f12 ] Generic edp gets mode from edid. However, some panels report incorrect mode in this way, resulting in glitches on panel. Introduce a new quirk additional_mode to the generic edid to pick a correct hardcoded mode. Signed-off-by: Hsin-Yi Wang Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20231117215056.1883314-2-hsinyi@chromium.org Signed-off-by: Sasha Levin

drm: panel-simple: add missing bus flags for Tianma tm070jvhg[30/33]

2024-02-01T00:17:11+00:00

[ Upstream commit 45dd7df26cee741b31c25ffdd44fb8794eb45ccd ] The DE signal is active high on this display, fill in the missing bus_flags. This aligns panel_desc with its display_timing. Fixes: 9a2654c0f62a ("drm/panel: Add and fill drm_panel type field") Fixes: b3bfcdf8a3b6 ("drm/panel: simple: add Tianma TM070JVHG33") Signed-off-by: Markus Niebel Signed-off-by: Alexander Stein Reviewed-by: Sam Ravnborg Link: https://lore.kernel.org/r/20231012084208.2731650-1-alexander.stein@ew.tq-group.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231012084208.2731650-1-alexander.stein@ew.tq-group.com Signed-off-by: Sasha Levin

drm/panel-edp: drm/panel-edp: Fix AUO B116XAK01 name and timing

2024-02-01T00:17:10+00:00

[ Upstream commit fc6e7679296530106ee0954e8ddef1aa58b2e0b5 ] Rename AUO 0x405c B116XAK01 to B116XAK01.0 and adjust the timing of auo_b116xak01: T3=200, T12=500, T7_max = 50 according to decoding edid and datasheet. Fixes: da458286a5e2 ("drm/panel: Add support for AUO B116XAK01 panel") Cc: stable@vger.kernel.org Signed-off-by: Hsin-Yi Wang Reviewed-by: Douglas Anderson Acked-by: Maxime Ripard Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20231107204611.3082200-2-hsinyi@chromium.org Signed-off-by: Sasha Levin

drm/panel: st7701: Fix AVCL calculation

2024-01-25T23:27:34+00:00

[ Upstream commit 799825aa87200ade1ba21db853d1c2ff720dcfe0 ] The AVCL register, according to the datasheet, comes in increments of -0.2v between -4.4v (represented by 0x0) to -5.0v (represented by 0x3). The current calculation is done by adding the defined AVCL value in mV to -4400 and then dividing by 200 to get the register value. Unfortunately if I subtract -4400 from -4400 I get -8800, which divided by 200 gives me -44. If I instead subtract -4400 from -4400 I get 0, which divided by 200 gives me 0. Based on the datasheet this is the expected register value. Fixes: 83b7a8e7e88e ("drm/panel/panel-sitronix-st7701: Parametrize voltage and timing") Signed-off-by: Chris Morgan Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20231208154847.130615-2-macroalpha82@gmail.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231208154847.130615-2-macroalpha82@gmail.com Signed-off-by: Sasha Levin

drm/panel-elida-kd35t133: hold panel in reset for unprepare

2024-01-25T23:27:31+00:00

[ Upstream commit 03c5b2a5f6c39fe4e090346536cf1c14ee18b61e ] For devices like the Anbernic RG351M and RG351P the panel is wired to an always on regulator. When the device suspends and wakes up, there are some slight artifacts on the screen that go away over time. If instead we hold the panel in reset status after it is unprepared, this does not happen. Fixes: 5b6603360c12 ("drm/panel: add panel driver for Elida KD35T133 panels") Signed-off-by: Chris Morgan Reviewed-by: Jessica Zhang Link: https://lore.kernel.org/r/20231117194405.1386265-3-macroalpha82@gmail.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231117194405.1386265-3-macroalpha82@gmail.com Signed-off-by: Sasha Levin

drm/panel: simple: Fix Innolux G101ICE-L01 timings

2023-12-03T06:32:07+00:00

[ Upstream commit 3f9a91b6c00e655d27bd785dcda1742dbdc31bda ] The Innolux G101ICE-L01 datasheet [1] page 17 table 6.1 INPUT SIGNAL TIMING SPECIFICATIONS indicates that maximum vertical blanking time is 40 lines. Currently the driver uses 29 lines. Fix it, and since this panel is a DE panel, adjust the timings to make them less hostile to controllers which cannot do 1 px HSA/VSA, distribute the delays evenly between all three parts. [1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut Reviewed-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de Signed-off-by: Sasha Levin

drm/panel: simple: Fix Innolux G101ICE-L01 bus flags

2023-12-03T06:32:07+00:00

[ Upstream commit 06fc41b09cfbc02977acd9189473593a37d82d9b ] Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description, ones which match both the datasheet and the panel display_timing flags . Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut Reviewed-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de Signed-off-by: Sasha Levin

drm/panel: auo,b101uan08.3: Fine tune the panel power sequence

2023-12-03T06:32:07+00:00

[ Upstream commit 6965809e526917b73c8f9178173184dcf13cec4b ] For "auo,b101uan08.3" this panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Fixes: 56ad624b4cb5 ("drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel") Signed-off-by: Xuxin Xiong Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20231114044205.613421-1-xuxinxiong@huaqin.corp-partner.google.com Signed-off-by: Sasha Levin

drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequence

2023-12-03T06:32:07+00:00

[ Upstream commit 812562b8d881ce6d33fed8052b3a10b718430fb5 ] For "boe,tv105wum-nw0" this special panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Signed-off-by: Shuijing Li Signed-off-by: Xinlei Lee Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230515094955.15982-3-shuijing.li@mediatek.com Stable-dep-of: 6965809e5269 ("drm/panel: auo,b101uan08.3: Fine tune the panel power sequence") Signed-off-by: Sasha Levin