kernel/linux.git/drivers/gpu/drm/panel, branch v5.9.16

drm/panel: sony-acx565akm: Fix race condition in probe

2020-12-16T09:58:27+00:00

[ Upstream commit 7c4bada12d320d8648ba3ede6f9b6f9e10f1126a ] The probe routine acquires the reset GPIO using GPIOD_OUT_LOW. Directly afterwards it calls acx565akm_detect(), which sets the GPIO value to HIGH. If the bootloader initialized the GPIO to HIGH before the probe routine was called, there is only a very short time period of a few instructions where the reset signal is LOW. Exact time depends on compiler optimizations, kernel configuration and alignment of the stars, but I expect it to be always way less than 10us. There are no public datasheets for the panel, but acx565akm_power_on() has a comment with timings and reset period should be at least 10us. So this potentially brings the panel into a half-reset state. The result is, that panel may not work after boot and can get into a working state by re-enabling it (e.g. by blanking + unblanking), since that does a clean reset cycle. This bug has recently been hit by Ivaylo Dimitrov, but there are some older reports which are probably the same bug. At least Tony Lindgren, Peter Ujfalusi and Jarkko Nikula have experienced it in 2017 describing the blank/unblank procedure as possible workaround. Note, that the bug really goes back in time. It has originally been introduced in the predecessor of the omapfb driver in commit 3c45d05be382 ("OMAPDSS: acx565akm panel: handle gpios in panel driver") in 2012. That driver eventually got replaced by a newer one, which had the bug from the beginning in commit 84192742d9c2 ("OMAPDSS: Add Sony ACX565AKM panel driver") and still exists in fbdev world. That driver has later been copied to omapdrm and then was used as a basis for this driver. Last but not least the omapdrm specific driver has been removed in commit 45f16c82db7e ("drm/omap: displays: Remove unused panel drivers"). Reported-by: Jarkko Nikula Reported-by: Peter Ujfalusi Reported-by: Tony Lindgren Reported-by: Aaro Koskinen Reported-by: Ivaylo Dimitrov Cc: Merlijn Wajer Cc: Laurent Pinchart Cc: Tomi Valkeinen Fixes: 1c8fc3f0c5d2 ("drm/panel: Add driver for the Sony ACX565AKM panel") Signed-off-by: Sebastian Reichel Tested-by: Ivaylo Dimitrov Tested-by: Aaro Koskinen Tested-by: Jarkko Nikula Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20201127200429.129868-1-sebastian.reichel@collabora.com Signed-off-by: Sasha Levin

drm: panel: Fix bpc for OrtusTech COM43H4M85ULC panel

2020-10-29T09:11:15+00:00

[ Upstream commit 3b8095169982ff4ec2a1b4be61b7224bbef23b48 ] The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel. Commit f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") has fixed the bus formats, but forgot to address the bpc value. Set it to 6. Fixes: f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") Signed-off-by: Laurent Pinchart Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200824003254.21904-1-laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin

drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel

2020-10-29T09:11:11+00:00

[ Upstream commit f098f168e91ca915c6cf8aa316136af647792f2f ] The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel, set the bus format to MEDIA_BUS_FMT_RGB666_1X18. Fixes: 725c9d40f3fe ("drm/panel: Add support for OrtusTech COM43H4M85ULC panel") Signed-off-by: Laurent Pinchart Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200812220244.24500-1-laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin

Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm

2020-08-06T02:50:06+00:00

Pull drm updates from Dave Airlie: "New xilinx displayport driver, AMD support for two new GPUs (more header files), i915 initial support for RocketLake and some work on their DG1 (discrete chip). The core also grew some lockdep annotations to try and constrain what drivers do with dma-fences, and added some documentation on why the idea of indefinite fences doesn't work. The long list is below. I do have some fixes trees outstanding, but I'll follow up with those later. core: - add user def flag to cmd line modes - dma_fence_wait added might_sleep - dma-fence lockdep annotations - indefinite fences are bad documentation - gem CMA functions used in more drivers - struct mutex removal - more drm_ debug macro usage - set/drop master api fixes - fix for drm/mm hole size comparison - drm/mm remove invalid entry optimization - optimise drm/mm hole handling - VRR debugfs added - uncompressed AFBC modifier support - multiple display id blocks in EDID - multiple driver sg handling fixes - __drm_atomic_helper_crtc_reset in all drivers - managed vram helpers ttm: - ttm_mem_reg handling cleanup - remove bo offset field - drop CMA memtype flag - drop mappable flag xilinx: - New Xilinx ZynqMP DisplayPort Subsystem driver nouveau: - add CRC support - start using NVIDIA published class header files - convert all push buffer emission to new macros - Proper push buffer space management for EVO/NVD channels. - firmware loading fixes - 2MiB system memory pages support on Pascal and newer vkms: - larger cursor support i915: - Rocketlake platform enablement - Early DG1 enablement - Numerous GEM refactorings - DP MST fixes - FBC, PSR, Cursor, Color, Gamma fixes - TGL, RKL, EHL workaround updates - TGL 8K display support fixes - SDVO/HDMI/DVI fixes amdgpu: - Initial support for Sienna Cichlid GPU - Initial support for Navy Flounder GPU - SI UVD/VCE support - expose rotation property - Add support for unique id on Arcturus - Enable runtime PM on vega10 boards that support BACO - Skip BAR resizing if the bios already did id - Major swSMU code cleanup - Fixes for DCN bandwidth calculations amdkfd: - Track SDMA usage per process - SMI events interface radeon: - Default to on chip GART for AGP boards on all arches - Runtime PM reference count fixes msm: - headers regenerated causing churn - a650/a640 display and GPU enablement - dpu dither support for 6bpc panels - dpu cursor fix - dsi/mdp5 enablement for sdm630/sdm636/sdm66 tegra: - video capture prep support - reflection support mediatek: - convert mtk_dsi to bridge API meson: - FBC support sun4i: - iommu support rockchip: - register locking fix - per-pixel alpha support PX30 VOP mgag200: - ported to simple and shmem helpers - device init cleanups - use managed pci functions - dropped hw cursor support ast: - use managed pci functions - use managed VRAM helpers - rework cursor support malidp: - dev_groups support hibmc: - refactor hibmc_drv_vdac: vc4: - create TXP CRTC imx: - error path fixes and cleanups etnaviv: - clock handling and error handling cleanups - use pin_user_pages" * tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits) drm/msm: use kthread_create_worker instead of kthread_run drm/msm/mdp5: Add MDP5 configuration for SDM636/660 drm/msm/dsi: Add DSI configuration for SDM660 drm/msm/mdp5: Add MDP5 configuration for SDM630 drm/msm/dsi: Add phy configuration for SDM630/636/660 drm/msm/a6xx: add A640/A650 hwcg drm/msm/a6xx: hwcg tables in gpulist drm/msm/dpu: add SM8250 to hw catalog drm/msm/dpu: add SM8150 to hw catalog drm/msm/dpu: intf timing path for displayport drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3 drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845 drm/msm/dpu: move some sspp caps to dpu_caps drm/msm/dpu: update UBWC config for sm8150 and sm8250 drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250 drm/msm/a6xx: set ubwc config for A640 and A650 drm/msm/adreno: un-open-code some packets drm/msm: sync generated headers drm/msm/a6xx: add build_bw_table for A640/A650 drm/msm/a6xx: fix crashstate capture for A650 ...

drm/panel: Fix auo, kd101n80-45na horizontal noise on edges of panel

2020-07-26T16:53:56+00:00

Fine tune the HBP and HFP to avoid the dot noise on the left and right edges. Signed-off-by: Jitao Shi Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200714123332.37609-1-jitao.shi@mediatek.com

drm: panel: simple: Delay HPD checking on boe_nv133fhm_n61 for 15 ms

2020-07-26T16:53:56+00:00

On boe_nv133fhm_n62 (and presumably on boe_nv133fhm_n61) a scope shows a small spike on the HPD line right when you power the panel on. The picture looks something like this: +-------------------------------------- | | | Power ---+ +--- | ++ | +----+| | HPD -----+ +---------------------------+ So right when power is applied there's a little bump in HPD and then there's small spike right before it goes low. The total time of the little bump plus the spike was measured on one panel as being 8 ms long. The total time for the HPD to go high on the same panel was 51.2 ms, though the datasheet only promises it is < 200 ms. When asked about this glitch, BOE indicated that it was expected and persisted until the TCON has been initialized. If this was a real hotpluggable DP panel then this wouldn't matter a whole lot. We'd debounce the HPD signal for a really long time and so the little blip wouldn't hurt. However, this is not a hotpluggable DP panel and the the debouncing logic isn't needed and just shows down the time needed to get the display working. This is why the code in panel_simple_prepare() doesn't do debouncing and just waits for HPD to go high once. Unfortunately if we get unlucky and happen to poll the HPD line right at the spike we can try talking to the panel before it's ready. Let's handle this situation by putting in a 15 ms prepare delay and decreasing the "hpd absent delay" by 15 ms. That means: * If you don't have HPD hooked up at all you've still got the hardcoded 200 ms delay. * If you've got HPD hooked up you will always wait at least 15 ms before checking HPD. The only case where this could be bad is if the panel is sharing a voltage rail with something else in the system and was already turned on long before the panel came up. In such a case we'll be delaying 15 ms for no reason, but it's not a huge delay and I don't see any other good solution to handle that case. Even though the delay was measured as 8 ms, 15 ms was chosen to give a bit of margin. Signed-off-by: Douglas Anderson Reviewed-by: Bjorn Andersson Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200716132120.1.I01e738cd469b61fc9b28b3ef1c6541a4f48b11bf@changeid

Merge v5.8-rc6 into drm-next

2020-07-23T22:48:05+00:00

I've got a silent conflict + two trees based on fixes to merge. Fixes a silent merge with amdgpu Signed-off-by: Dave Airlie

drm/panel-simple: Add 50 Hz mode to the Frida FRD350H54004 panel

2020-07-16T17:06:43+00:00

By changing the pixel clock and the length of the back porch, it is possible to obtain a perfect 50 Hz refresh rate. v2: Rebase on drm-misc-next Signed-off-by: Paul Cercueil Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200716125647.10964-2-paul@crapouillou.net

drm/panel-simple: Fix inverted V/H SYNC for Frida FRD350H54004 panel

2020-07-16T17:06:39+00:00

The FRD350H54004 panel was marked as having active-high VSYNC and HSYNC signals, which sorts-of worked, but resulted in the picture fading out under certain circumstances. Fix this issue by marking VSYNC and HSYNC signals active-low. v2: Rebase on drm-misc-next Fixes: 7b6bd8433609 ("drm/panel: simple: Add support for the Frida FRD350H54004 panel") Cc: stable@vger.kernel.org # v5.5 Signed-off-by: Paul Cercueil Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200716125647.10964-1-paul@crapouillou.net

drm: panel: simple: Fix bpc for LG LB070WV8 panel

2020-07-12T10:40:45+00:00

The LG LB070WV8 panel incorrectly reports a 16 bits per component value, while the panel uses 8 bits per component. Fix it. Fixes: dd0150026901 ("drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel") Signed-off-by: Laurent Pinchart Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200711225317.28476-1-laurent.pinchart+renesas@ideasonboard.com