kernel/linux.git/drivers/gpu/drm/panel, branch v5.10.258

drm/panel: simple: Correct G190EAN01 prepare timing

2026-06-01T15:29:32+00:00

[ Upstream commit f1080f82570b797598c1ba7e9c800ae9e94aafc6 ] The prepare timing specified by the G190EAN01 datasheet should be between 30 and 50 ms. Considering it might take some time for the LVDS encoder to enable the signal, we should only wait the min. required time in the panel driver and not the max. allowed time. Fixes: 2f7b832fc992 ("drm/panel: simple: Add support for AUO G190EAN01 panel") Signed-off-by: Sebastian Reichel Signed-off-by: Ian Ray Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patch.msgid.link/20260217142528.68613-1-ian.ray@gehealthcare.com Signed-off-by: Sasha Levin

drm/panel-simple: fix connector type for DataImage SCF0700C48GGU18 panel

2026-02-06T15:40:01+00:00

commit 6ab3d4353bf75005eaa375677c9fed31148154d6 upstream. The connector type for the DataImage SCF0700C48GGU18 panel is missing and devm_drm_panel_bridge_add() requires connector type to be set. This leads to a warning and a backtrace in the kernel log and panel does not work: " WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8 " The warning is triggered by a check for valid connector type in devm_drm_panel_bridge_add(). If there is no valid connector type set for a panel, the warning is printed and panel is not added. Fill in the missing connector type to fix the warning and make the panel operational once again. Cc: stable@vger.kernel.org Fixes: 97ceb1fb08b6 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18") Signed-off-by: Marek Vasut Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com Signed-off-by: Greg Kroah-Hartman

drm/panel: visionox-rm69299: Don't clear all mode flags

2026-01-19T12:11:27+00:00

[ Upstream commit 39144b611e9cd4f5814f4098c891b545dd70c536 ] Don't clear all mode flags. We only want to maek sure we use HS mode during unprepare. Fixes: c7f66d32dd431 ("drm/panel: add support for rm69299 visionox panel") Reviewed-by: Neil Armstrong Signed-off-by: Guido Günther Reviewed-by: Dmitry Baryshkov Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20250910-shift6mq-panel-v3-2-a7729911afb9@sigxcpu.org Signed-off-by: Sasha Levin

drm/panel: simple: Update timings for AUO G101EVN010

2025-06-04T12:36:56+00:00

[ Upstream commit 7c6fa1797a725732981f2d77711c867166737719 ] Switch to panel timings based on datasheet for the AUO G101EVN01.0 LVDS panel. Default timings were tested on the panel. Previous mode-based timings resulted in horizontal display shift. Signed-off-by: Kevin Baker Fixes: 4fb86404a977 ("drm/panel: simple: Add AUO G101EVN010 panel support") Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com Signed-off-by: Sasha Levin

drm/panel: boe-tv101wum-nl6: Check for errors on the NOP in prepare()

2024-08-19T03:40:48+00:00

[ Upstream commit 6320b9199dd99622668649c234d4e8a99e44a9c8 ] The mipi_dsi_dcs_nop() function returns an error but we weren't checking it in boe_panel_prepare(). Add a check. This is highly unlikely to matter in practice. If the NOP failed then likely later MIPI commands would fail too. Found by code inspection. Fixes: 812562b8d881 ("drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequence") Signed-off-by: Douglas Anderson Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Dmitry Baryshkov Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20240517143643.3.Ibffbaa5b4999ac0e55f43bf353144433b099d727@changeid Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240517143643.3.Ibffbaa5b4999ac0e55f43bf353144433b099d727@changeid Signed-off-by: Sasha Levin

drm/panel: boe-tv101wum-nl6: If prepare fails, disable GPIO before regulators

2024-08-19T03:40:48+00:00

[ Upstream commit 587c48f622374e5d47b1d515c6006a4df4dee882 ] The enable GPIO should clearly be set low before turning off regulators. That matches both the inverse order that things were enabled and also the order in unprepare(). Fixes: a869b9db7adf ("drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel") Signed-off-by: Douglas Anderson Reviewed-by: Dmitry Baryshkov Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20240517143643.2.Ieac346cd0f1606948ba39ceea06b55359fe972b6@changeid Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240517143643.2.Ieac346cd0f1606948ba39ceea06b55359fe972b6@changeid Signed-off-by: Sasha Levin

drm/panel: simple: Add missing display timing flags for KOE TX26D202VM0BWA

2024-07-05T07:12:50+00:00

[ Upstream commit 37ce99b77762256ec9fda58d58fd613230151456 ] KOE TX26D202VM0BWA panel spec indicates the DE signal is active high in timing chart, so add DISPLAY_FLAGS_DE_HIGH flag in display timing flags. This aligns display_timing with panel_desc. Fixes: 8a07052440c2 ("drm/panel: simple: Add support for KOE TX26D202VM0BWA panel") Signed-off-by: Liu Ying Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240624015612.341983-1-victor.liu@nxp.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240624015612.341983-1-victor.liu@nxp.com Signed-off-by: Sasha Levin

drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep

2024-07-05T07:12:49+00:00

[ Upstream commit ee7860cd8b5763017f8dc785c2851fecb7a0c565 ] The ilitek-ili9881c controls the reset GPIO using the non-sleeping gpiod_set_value() function. This complains loudly when the GPIO controller needs to sleep. As the caller can sleep, use gpiod_set_value_cansleep() to fix the issue. Signed-off-by: Laurent Pinchart Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240317154839.21260-1-laurent.pinchart@ideasonboard.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240317154839.21260-1-laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin

drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connector

2024-06-16T11:32:12+00:00

[ Upstream commit 11ac72d033b9f577e8ba0c7a41d1c312bb232593 ] The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , add the missing bus_format. Add missing connector type and bus_flags as well. Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is capable of both RGB 18bit/24bit panel, the current configuration uses 18bit mode, .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , .bpc = 6. Support for the 24bit mode would require another entry in panel-simple with .bus_format = MEDIA_BUS_FMT_RGB666_1X7X4_SPWG and .bpc = 8, which is out of scope of this fix. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf Fixes: f8fa17ba812b ("drm/panel: simple: Add support for Innolux G121X1-L03") Signed-off-by: Marek Vasut Acked-by: Jessica Zhang Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-2-marex@denx.de Signed-off-by: Sasha Levin

drm/panel: visionox-rm69299: don't unregister DSI device

2024-05-02T14:23:37+00:00

[ Upstream commit 9e4d3f4f34455abbaa9930bf6b7575a5cd081496 ] The DSI device for the panel was registered by the DSI host, so it is an error to unregister it from the panel driver. Drop the call to mipi_dsi_device_unregister(). Fixes: c7f66d32dd43 ("drm/panel: add support for rm69299 visionox panel") Reviewed-by: Jessica Zhang Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240404-drop-panel-unregister-v1-1-9f56953c5fb9@linaro.org Signed-off-by: Sasha Levin