kernel/linux.git/drivers/gpu/drm/panel, branch v4.19.252

drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare

2022-04-27T11:39:44+00:00

[ Upstream commit 5f18c0782b99e26121efa93d20b76c19e17aa1dd ] The panel has a prepare call which is before video starts, and an enable call which is after. The Toshiba bridge should be configured before video, so move the relevant power and initialisation calls to prepare. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Dave Stevenson Signed-off-by: Stefan Wahren Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-3-stefan.wahren@i2se.com Signed-off-by: Sasha Levin

drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised

2022-04-27T11:39:44+00:00

[ Upstream commit f92055ae0acb035891e988ce345d6b81a0316423 ] If a call to rpi_touchscreen_i2c_write from rpi_touchscreen_probe fails before mipi_dsi_device_register_full is called, then in trying to log the error message if uses ts->dsi->dev when it is still NULL. Use ts->i2c->dev instead, which is initialised earlier in probe. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Dave Stevenson Signed-off-by: Stefan Wahren Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-2-stefan.wahren@i2se.com Signed-off-by: Sasha Levin

drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings

2022-03-23T08:10:44+00:00

[ Upstream commit fc1b6ef7bfb3d1d4df868b1c3e0480cacda6cd81 ] The Innolux G070Y2-L01 supports two modes of operation: 1) FRC=Low/NC ... MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ... BPP=6 2) FRC=High ..... MEDIA_BUS_FMT_RGB888_1X7X4_SPWG ... BPP=8 Currently the panel description mixes both, BPP from 1) and bus format from 2), which triggers a warning at panel-simple.c:615. Pick the later, set bpp=8, fix the warning. Fixes: a5d2ade627dca ("drm/panel: simple: Add support for Innolux G070Y2-L01") Signed-off-by: Marek Vasut Cc: Christoph Fritz Cc: Laurent Pinchart Cc: Maxime Ripard Cc: Sam Ravnborg Cc: Thomas Zimmermann Reviewed-by: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/20220220040718.532866-1-marex@denx.de Signed-off-by: Maarten Lankhorst Signed-off-by: Sasha Levin

drm/panel: innolux-p079zca: Delete panel on attach() failure

2022-01-27T08:04:16+00:00

[ Upstream commit 32a267e9c057e1636e7afdd20599aa5741a73079 ] If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't ready), we leave a dangling drm_panel reference to freed memory. Clean that up on failure. This problem exists since the driver's introduction, but is especially relevant after refactored for dual-DSI variants. Fixes: 14c8f2e9f8ea ("drm/panel: add Innolux P079ZCA panel driver") Fixes: 7ad4e4636c54 ("drm/panel: p079zca: Refactor panel driver to support multiple panels") Signed-off-by: Brian Norris Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.2.I9023cf8811a3abf4964ed84eb681721d8bb489d6@changeid Signed-off-by: Sasha Levin

drm/panel: raspberrypi-touchscreen: Prevent double-free

2021-07-28T09:13:49+00:00

[ Upstream commit 7bbcb919e32d776ca8ddce08abb391ab92eef6a9 ] The mipi_dsi_device allocated by mipi_dsi_device_register_full() is already free'd on release. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Maxime Ripard Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20210720134525.563936-9-maxime@cerno.tech Signed-off-by: Sasha Levin

drm: panel: simple: Fix bpc for LG LB070WV8 panel

2020-08-19T06:14:57+00:00

[ Upstream commit a6ae2fe5c9f9fd355a48fb7d21c863e5b20d6c9c ] The LG LB070WV8 panel incorrectly reports a 16 bits per component value, while the panel uses 8 bits per component. Fix it. Fixes: dd0150026901 ("drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel") Signed-off-by: Laurent Pinchart Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200711225317.28476-1-laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Sasha Levin

drm: panel-lvds: Potential Oops in probe error handling

2020-01-27T13:51:20+00:00

[ Upstream commit fb2ee9bf084bcaeff1e5be100decc0eacb4af2d5 ] The "lvds->backlight" pointer could be NULL in situations where of_parse_phandle() returns NULL. This code is cleaner if we use the managed devm_of_find_backlight() so the clean up is automatic. Fixes: 7c9dff5bd643 ("drm: panels: Add LVDS panel driver") Signed-off-by: Dan Carpenter Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20190911104928.GA15930@mwanda Signed-off-by: Sasha Levin

drm/panel: Add missing drm_panel_init() in panel drivers

2019-12-31T15:34:47+00:00

[ Upstream commit 65abbda8ed7ca48c8807d6b04a77431b438fa659 ] Panels must be initialised with drm_panel_init(). Add the missing function call in the panel-raspberrypi-touchscreen.c and panel-sitronix-st7789v.c drivers. Signed-off-by: Laurent Pinchart Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-2-laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin

drm/panel: check failure cases in the probe func

2019-10-07T16:56:31+00:00

[ Upstream commit afd6d4f5a52c16e1483328ac074abb1cde92c29f ] The following function calls may fail and return NULL, so the null check is added. of_graph_get_next_endpoint of_graph_get_remote_port_parent of_graph_get_remote_port Update: Thanks to Sam Ravnborg, for suggession on the use of goto to avoid leaking endpoint. Signed-off-by: Navid Emamdoost Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20190724195534.9303-1-navid.emamdoost@gmail.com Signed-off-by: Sasha Levin

drm/panel: simple: fix AUO g185han01 horizontal blanking

2019-10-07T16:56:29+00:00

[ Upstream commit f8c6bfc612b56f02e1b8fae699dff12738aaf889 ] The horizontal blanking periods are too short, as the values are specified for a single LVDS channel. Since this panel is dual LVDS they need to be doubled. With this change the panel reaches its nominal vrefresh rate of 60Fps, instead of the 64Fps with the current wrong blanking. Philipp Zabel added: The datasheet specifies 960 active clocks + 40/128/160 clocks blanking on each of the two LVDS channels (min/typical/max), so doubled this is now correct. Signed-off-by: Lucas Stach Reviewed-by: Philipp Zabel Reviewed-by: Sam Ravnborg Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/1562764060.23869.12.camel@pengutronix.de Signed-off-by: Sasha Levin