kernel/linux.git/drivers/gpu/drm/panel, branch v4.11.8

drm/panel: simple: Specify bus width and flags for EDT displays

2017-01-26T09:57:18+00:00

The display has a 18-Bit parallel LCD interface, require DE to be active high and data driven by the controller on falling pixel clock edge (display samples on rising edge). Signed-off-by: Stefan Agner Signed-off-by: Thierry Reding

drm/panel: simple: Add Netron DY E231732

2017-01-26T09:55:01+00:00

The E231732 is a 7" panel with a resolution of 1024x600. Signed-off-by: Maxime Ripard [treding@nvidia.com: add missing device tree binding] Signed-off-by: Thierry Reding

drm/panel: simple: Add support for Tianma TM070JDHG30

2017-01-26T09:40:32+00:00

The Tianma TM070JDHG30 is a 7" LVDS display with a resolution of 1280x800. http://usa.tianma.com/products-technology/product/tm070jdhg30-00 You can also find this product along with a FT5x06 touch controller from Boundary Devices: https://boundarydevices.com/product/bd070lic2/ Signed-off-by: Gary Bisson Acked-by: Rob Herring Signed-off-by: Thierry Reding

drm/panel: simple: Add support BOE NV101WXMN51

2017-01-26T09:34:17+00:00

The BOE NV101WXMN51 is a 10.1" WXGA color active matrix TFT LCD module using amorphous silicon TFT's as an active switching devices. It can be supported by the simple-panel driver. Read the panel default EDID information: EDID MODE DETAILS name = pixel_clock = 71900 lvds_dual_channel = 0 refresh = 0 ha = 1280 hbl = 160 hso = 48 hspw = 32 hborder = 0 va = 800 vbl = 32 vso = 3 vspw = 5 vborder = 0 phsync = + pvsync = - x_mm = 0 y_mm = 0 drm_display_mode .hdisplay = 1280 .hsync_start = 1328 .hsync_end = 1360 .htotal = 1440 .vdisplay = 800 .vsync_start = 803 .vsync_end = 808 .vtotal = 832 There are two modes in the EDID: Detailed mode1: Clock 71.900 MHz, 216 mm x 135 mm 1280 1328 1360 1440 hborder 0 800 803 808 832 vborder 0 +hsync -vsync Detailed mode2: Clock 57.500 MHz, 216 mm x 135 mm 1280 1328 1360 1440 hborder 0 800 803 808 832 vborder 0 +hsync -vsync Support both of these modes on the panel. Signed-off-by: Caesar Wang Reviewed-by: Douglas Anderson Reviewed-by: Stéphane Marchesin Signed-off-by: Thierry Reding

drm/panel: simple: Add support for AUO G185HAN01

2016-12-06T16:06:32+00:00

This adds support for the AU Optronics G185HAN01 18.5" LVDS FullHD TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by: Lucas Stach Signed-off-by: Thierry Reding

drm/panel: simple: Add support for AUO G133HAN01

2016-12-06T16:06:31+00:00

This adds support for the AU Optronics G133HAN01 13.3" LVDS FullHD TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by: Lucas Stach Signed-off-by: Thierry Reding

drm/panel: simple: Add more properties to Innolux G121I1-L01

2016-12-06T15:55:44+00:00

Convert from a single mode to display timings, which allow to describe the minimum/maximium blanking and clock rates, add enable/disable delays and provide the bus format. Signed-off-by: Lucas Stach Signed-off-by: Thierry Reding

drm/panel: simple: Add bits-per-component for Sharp LQ123P1JX31

2016-12-06T15:52:32+00:00

The Sharp LQ123P1JX31 panel support 8 bits per component. Signed-off-by: zain wang Signed-off-by: Thierry Reding

drm/panel: simple: Check against num_timings when setting preferred for timing

2016-12-06T15:47:07+00:00

In the loop on .timings, we should check .num_timings to see if it's the only mode specified, not .num_modes, which should be used with .modes. Fixes: cda553725c92 ("drm/panel: simple: Set appropriate mode type") Signed-off-by: Chen-Yu Tsai Signed-off-by: Thierry Reding

drm/panel: Add support for Chunghwa CLAA070WP03XG panel

2016-12-06T15:43:55+00:00

The Chunghwa CLAA070WP03XG is a 7" 1280x800 panel, which can be supported by the simple panel driver. Signed-off-by: Randy Li Signed-off-by: Thierry Reding