kernel/linux.git/drivers/gpu/drm/panel/panel-simple.c, branch v5.10.263

drm/panel: simple: Correct G190EAN01 prepare timing

2026-06-01T15:29:32+00:00

[ Upstream commit f1080f82570b797598c1ba7e9c800ae9e94aafc6 ] The prepare timing specified by the G190EAN01 datasheet should be between 30 and 50 ms. Considering it might take some time for the LVDS encoder to enable the signal, we should only wait the min. required time in the panel driver and not the max. allowed time. Fixes: 2f7b832fc992 ("drm/panel: simple: Add support for AUO G190EAN01 panel") Signed-off-by: Sebastian Reichel Signed-off-by: Ian Ray Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patch.msgid.link/20260217142528.68613-1-ian.ray@gehealthcare.com Signed-off-by: Sasha Levin

drm/panel-simple: fix connector type for DataImage SCF0700C48GGU18 panel

2026-02-06T15:40:01+00:00

commit 6ab3d4353bf75005eaa375677c9fed31148154d6 upstream. The connector type for the DataImage SCF0700C48GGU18 panel is missing and devm_drm_panel_bridge_add() requires connector type to be set. This leads to a warning and a backtrace in the kernel log and panel does not work: " WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8 " The warning is triggered by a check for valid connector type in devm_drm_panel_bridge_add(). If there is no valid connector type set for a panel, the warning is printed and panel is not added. Fill in the missing connector type to fix the warning and make the panel operational once again. Cc: stable@vger.kernel.org Fixes: 97ceb1fb08b6 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18") Signed-off-by: Marek Vasut Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com Signed-off-by: Greg Kroah-Hartman

drm/panel: simple: Update timings for AUO G101EVN010

2025-06-04T12:36:56+00:00

[ Upstream commit 7c6fa1797a725732981f2d77711c867166737719 ] Switch to panel timings based on datasheet for the AUO G101EVN01.0 LVDS panel. Default timings were tested on the panel. Previous mode-based timings resulted in horizontal display shift. Signed-off-by: Kevin Baker Fixes: 4fb86404a977 ("drm/panel: simple: Add AUO G101EVN010 panel support") Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com Signed-off-by: Sasha Levin

drm/panel: simple: Add missing display timing flags for KOE TX26D202VM0BWA

2024-07-05T07:12:50+00:00

[ Upstream commit 37ce99b77762256ec9fda58d58fd613230151456 ] KOE TX26D202VM0BWA panel spec indicates the DE signal is active high in timing chart, so add DISPLAY_FLAGS_DE_HIGH flag in display timing flags. This aligns display_timing with panel_desc. Fixes: 8a07052440c2 ("drm/panel: simple: Add support for KOE TX26D202VM0BWA panel") Signed-off-by: Liu Ying Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240624015612.341983-1-victor.liu@nxp.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240624015612.341983-1-victor.liu@nxp.com Signed-off-by: Sasha Levin

drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connector

2024-06-16T11:32:12+00:00

[ Upstream commit 11ac72d033b9f577e8ba0c7a41d1c312bb232593 ] The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , add the missing bus_format. Add missing connector type and bus_flags as well. Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is capable of both RGB 18bit/24bit panel, the current configuration uses 18bit mode, .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , .bpc = 6. Support for the 24bit mode would require another entry in panel-simple with .bus_format = MEDIA_BUS_FMT_RGB666_1X7X4_SPWG and .bpc = 8, which is out of scope of this fix. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf Fixes: f8fa17ba812b ("drm/panel: simple: Add support for Innolux G121X1-L03") Signed-off-by: Marek Vasut Acked-by: Jessica Zhang Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-2-marex@denx.de Signed-off-by: Sasha Levin

drm: panel-simple: add missing bus flags for Tianma tm070jvhg[30/33]

2024-02-23T07:42:01+00:00

[ Upstream commit 45dd7df26cee741b31c25ffdd44fb8794eb45ccd ] The DE signal is active high on this display, fill in the missing bus_flags. This aligns panel_desc with its display_timing. Fixes: 9a2654c0f62a ("drm/panel: Add and fill drm_panel type field") Fixes: b3bfcdf8a3b6 ("drm/panel: simple: add Tianma TM070JVHG33") Signed-off-by: Markus Niebel Signed-off-by: Alexander Stein Reviewed-by: Sam Ravnborg Link: https://lore.kernel.org/r/20231012084208.2731650-1-alexander.stein@ew.tq-group.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231012084208.2731650-1-alexander.stein@ew.tq-group.com Signed-off-by: Sasha Levin

drm/panel: simple: Fix Innolux G101ICE-L01 timings

2023-12-08T07:46:08+00:00

[ Upstream commit 3f9a91b6c00e655d27bd785dcda1742dbdc31bda ] The Innolux G101ICE-L01 datasheet [1] page 17 table 6.1 INPUT SIGNAL TIMING SPECIFICATIONS indicates that maximum vertical blanking time is 40 lines. Currently the driver uses 29 lines. Fix it, and since this panel is a DE panel, adjust the timings to make them less hostile to controllers which cannot do 1 px HSA/VSA, distribute the delays evenly between all three parts. [1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut Reviewed-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de Signed-off-by: Sasha Levin

drm/panel: simple: Fix Innolux G101ICE-L01 bus flags

2023-12-08T07:46:08+00:00

[ Upstream commit 06fc41b09cfbc02977acd9189473593a37d82d9b ] Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description, ones which match both the datasheet and the panel display_timing flags . Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut Reviewed-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de Signed-off-by: Sasha Levin

drm/panel: simple: Add missing connector type and pixel format for AUO T215HVN01

2023-09-19T10:20:12+00:00

[ Upstream commit 7a675a8fa598edb29a664a91adb80f0340649f6f ] The connector type and pixel format are missing for this panel, add them to prevent various drivers from failing to determine either of those parameters. Fixes: 7ee933a1d5c4 ("drm/panel: simple: Add support for AUO T215HVN01") Signed-off-by: Marek Vasut Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20230709134914.449328-1-marex@denx.de Signed-off-by: Sasha Levin

drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs

2023-08-26T13:26:52+00:00

[ Upstream commit e8470c0a7bcaa82f78ad34282d662dd7bd9630c2 ] Commit 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") added support for this panel model, but the timings it implements are very different from what the datasheet describes. I checked both the G121EAN01.0 datasheet from [0] and the G121EAN01.4 one from [1] and they all have the same timings: for example the LVDS clock typical value is 74.4 MHz, not 66.7 MHz as implemented. Replace the timings with the ones from the documentation. These timings have been tested and the clock frequencies verified with an oscilloscope to ensure they are correct. Also use struct display_timing instead of struct drm_display_mode in order to also specify the minimum and maximum values. [0] https://embedded.avnet.com/product/g121ean01-0/ [1] https://embedded.avnet.com/product/g121ean01-4/ Fixes: 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") Signed-off-by: Luca Ceresoli Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230804151239.835216-1-luca.ceresoli@bootlin.com Signed-off-by: Sasha Levin