kernel/linux.git/drivers/gpu/drm/omapdrm, branch v7.2-rc1

Merge tag 'drm-misc-next-2026-05-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

2026-05-08T04:16:04+00:00

drm-misc-next for v7.2-rc1: UAPI Changes: - Support medium/low power modes in amdxdna. - Support limiting frequency in ivpu. - Document license for drm core uAPI headers. - Add the following DRM formats: P230, Y7, XYYY2101010, T430, XVUY210101010. Cross-subsystem Changes: - Add and improve dt-bindings. - Remove unused dma-fence-array's signal_on_any support. Core Changes: - Do not call drop_master on file close if not master. - Convert drm-bridge and drm/atomic to use drm_printf_indent. - Remove the extra call to drm_connector_attach_encoder after drm_bridge_connector_init(). - Assorted docbook updates. Driver Changes: - Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor, bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200, etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3, bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500, bridge/microchip-lvds, mgag200. - Add support for MStar TSUMU88ADT3-LF-1 bridge. - Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092, ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C, Displaytech DT050BTFT-PTS panels. - Improve mipi-dsi shutdown and convert a panasonic panel to use the mipi-dsi wrappers. - Allowing dumping vbios over debugfs in GSP-RM mode. - Update maintainers for ivpu, add reviewer for drm-bridge code and update maintainers for LT8912B DRM HDMI bridge. - Add test pattern support to bridge/ti-sn65dsi83. - Convert vmwgfx to vblank timers. - Add power management to sysfb drm drivers to allow suspend/resume. - Support the aforementioned new drm formats in xlnx/qynqmp. - Fix panel Kconfig dependencies. - Add carveout support for debugging and bringup to amxdna. - Add support for long command tx via videobuffer in bridge/tc358768. Signed-off-by: Dave Airlie From: Maarten Lankhorst Link: https://patch.msgid.link/f73f342d-6efb-416d-81b0-1716bdd98d5f@linux.intel.com

Merge tag 'drm-misc-next-2026-04-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

2026-05-06T00:12:25+00:00

drm-misc-next for v7.1-rc1: UAPI Changes: - Expose per-client BO memory usage via fdinfo in amdxdna. (Hou) - Change the default priority of drm scheduler to fair. (Tvrtko) Cross-subsystem Changes: - Revert hugetlb support in udmabuf. (Gunthorpe) - Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov) - Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser) clarify drm_bridge_get/put. (Tvrtko) - Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal) - Use IOVA allocations in gpusvm and pagemap APIs. (Brost) - Fix tracepoints vs dma-fence lifetime. (Tvrtko) - Convert st-dma*.c tests to use kunit. (Gunthorpe) Core Changes: - Deduplicate counter and timestamp retrieval in vblank code. (Ville) - Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen) - Prevent bridge and encoder chain changes at inopportune times. (Ceresoli) - Map the run queue 1:1 to the drm scheduler. (Tvrtko) Driver Changes: - Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis, panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor, renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau. bridge/analogix_dp, bridge/exynos_dp, omap. - Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels. - Add support for a lot of waveshare panels (Baryshkov) - Support for AIE4 devices in accel/wamdxdna. (Zhang) - Enable support for GEM shrinking in panthor. (Goel/Brezillon) - Runtime Power Management is added to v3d. (Canal) - Allow panel probing and use the panel bridge helper in analogix_dp. (Ding) - Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann) From: Maarten Lankhorst Link: https://patch.msgid.link/bf31b1a1-951b-4f60-b226-22e8c083697d@linux.intel.com Signed-off-by: Dave Airlie

drm: Rename struct drm_atomic_state to drm_atomic_commit

2026-05-04T04:05:04+00:00

The KMS framework uses two slightly different definitions for the state concept. For a given object (plane, CRTC, encoder, etc., so drm_$OBJECT_state), the state is the entire state of that object. However, at the device level, drm_atomic_state refers to a state update for a limited number of objects. Thus, drm_atomic_state isn't the entire device state, but only the full state of some objects in that device. This has been an endless source of confusion and thus bugs. We can rename the drm_atomic_state structure to drm_atomic_commit to make it less confusing. This patch was created using: rg -l drm_atomic_state | \ xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g' mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c Acked-by: Simona Vetter Acked-by: Thomas Zimmermann Acked-by: Jani Nikula Reviewed-by: Luca Ceresoli Tested-by: Luca Ceresoli Signed-off-by: Maxime Ripard Signed-off-by: Dave Airlie Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org

drm/omapdrm: remove now-redundant call to drm_connector_attach_encoder()

2026-04-30T08:30:32+00:00

drm_connector_attach_encoder() is now called by drm_bridge_connector_init(). Reviewed-by: Dmitry Baryshkov Link: https://patch.msgid.link/20260423-drm-bridge-connector-attach_encoder-v2-18-2ae6ca69b390@bootlin.com Signed-off-by: Luca Ceresoli

drm/omap: dss: convert to of_drm_find_and_get_bridge()

2026-04-09T12:38:08+00:00

of_drm_find_bridge() is deprecated. Move to its replacement of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it is put when done. omapdss_device_init_output() can take one bridge pointer in out->bridge or two pointers in out->bridge and out->next_bridge. Ensure each has a corresponding drm_bridge_get() and add drm_bridge_put() calls in the cleanup code. Also slightly change the initial code assigning out->panel and out->bridge to ensure and clarify that either out->panel or out->bridge is set in the function prologue, not both. If both were set, the 'if (out->panel){...}' code that follows would overwrite out->bridge without having put the reference. Finally, take a reference in case a panel_bridge is added using drm_panel_bridge_add(). This ensures we always need to put a reference, which came either from of_drm_find_and_get_bridge() or by the drm_panel_bridge_add+drm_bridge_get() branch. Reviewed-by: Louis Chauvet Reviewed-by: Linus Walleij Link: https://patch.msgid.link/20260402-drm-bridge-alloc-getput-drm_of_find_bridge-4-v4-4-421781c8c061@bootlin.com Signed-off-by: Luca Ceresoli

drm/atomic: Remove state argument to drm_atomic_private_obj_init

2026-03-20T09:03:11+00:00

Now that all drm_private_objs users have been converted to use atomic_create_state instead of the old ad-hoc initialization, we can remove the state parameter from drm_private_obj_init and the fallback code. Reviewed-by: Dmitry Baryshkov Reviewed-by: Tomi Valkeinen Reviewed-by: Liviu Dudau Reviewed-by: Maíra Canal Reviewed-by: Thomas Zimmermann Link: https://patch.msgid.link/20260224-drm-private-obj-reset-v5-4-5a72f8ec9934@kernel.org Signed-off-by: Maxime Ripard

drm/omapdrm: Switch private_obj initialization to atomic_create_state

2026-03-20T09:03:10+00:00

The omapdrm driver relies on a drm_private_obj, that is initialized by allocating and initializing a state, and then passing it to drm_private_obj_init. Since we're gradually moving away from that pattern to the more established one relying on a atomic_create_state implementation, let's migrate this instance to the new pattern. Reviewed-by: Thomas Zimmermann Reviewed-by: Tomi Valkeinen Link: https://patch.msgid.link/20260224-drm-private-obj-reset-v5-2-5a72f8ec9934@kernel.org Signed-off-by: Maxime Ripard

Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses

2026-02-22T16:26:33+00:00

Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook Signed-off-by: Linus Torvalds

Convert more 'alloc_obj' cases to default GFP_KERNEL arguments

2026-02-22T04:03:00+00:00

This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51+00:00

This was done entirely with mindless brute force, using git grep -l '\