kernel/linux.git/drivers/gpu/drm/msm, branch v6.9.12

drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails

2024-06-12T09:39:34+00:00

[ Upstream commit 46d4efcccc688cbacdd70a238bedca510acaa8e4 ] Calling a6xx_destroy() before adreno_gpu_init() leads to a null pointer dereference on: msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL); as gpu->pdev is only assigned in: a6xx_gpu_init() |_ adreno_gpu_init |_ msm_gpu_init() Instead of relying on handwavy null checks down the cleanup chain, explicitly de-allocate the LLC data and free a6xx_gpu instead. Fixes: 76efc2453d0e ("drm/msm/gpu: Fix crash during system suspend after unbind") Signed-off-by: Konrad Dybcio Patchwork: https://patchwork.freedesktop.org/patch/588919/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/adreno: fix CP cycles stat retrieval on a7xx

2024-06-12T09:39:34+00:00

[ Upstream commit 328660262df89ab64031059909d763f7a8af9570 ] a7xx_submit() should use the a7xx variant of the RBBM_PERFCTR_CP register for retrieving the CP cycles value before and after the submitted command stream execution. Signed-off-by: Zan Dobersek Fixes: af66706accdf ("drm/msm/a6xx: Add skeleton A7xx support") Patchwork: https://patchwork.freedesktop.org/patch/588445/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dpu: Add callback function pointer check before its call

2024-06-12T09:39:29+00:00

[ Upstream commit 530f272053a5e72243a9cb07bb1296af6c346002 ] In dpu_core_irq_callback_handler() callback function pointer is compared to NULL, but then callback function is unconditionally called by this pointer. Fix this bug by adding conditional return. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c929ac60b3ed ("drm/msm/dpu: allow just single IRQ callback") Signed-off-by: Aleksandr Mishin Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/588237/ Link: https://lore.kernel.org/r/20240408085523.12231-1-amishin@t-argos.ru Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dpu: Allow configuring multiple active DSC blocks

2024-06-12T09:39:28+00:00

[ Upstream commit ca97fa419dfe62a384fdea8b33553c4d6afe034e ] Just like the active interface and writeback block in ctl_intf_cfg_v1(), and later the rest of the blocks in followup active-CTL fixes or reworks, multiple calls to this function should enable additional DSC blocks instead of overwriting the blocks that are enabled. This pattern is observed in an active-CTL scenario since DPU 5.0.0 where for example bonded-DSI uses a single CTL to drive multiple INTFs, and each encoder calls this function individually with the INTF (hence the pre-existing update instead of overwrite of this bitmask) and DSC blocks it wishes to be enabled, and expects them to be OR'd into the bitmask. The reverse already exists in reset_intf_cfg_v1() where only specified DSC blocks are removed out of the CTL_DSC_ACTIVE bitmask (same for all other blocks and ACTIVE bitmasks), leaving the rest enabled. Fixes: 77f6da90487c ("drm/msm/disp/dpu1: Add DSC support in hw_ctl") Signed-off-by: Marijn Suijten Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/589902/ Link: https://lore.kernel.org/r/20240417-drm-msm-initial-dualpipe-dsc-fixes-v1-4-78ae3ee9a697@somainline.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dpu: Always flush the slave INTF on the CTL

2024-06-12T09:39:28+00:00

[ Upstream commit 2b938c3ab0a69ec6ea587bbf6fc2aec3db4a8736 ] As we can clearly see in a downstream kernel [1], flushing the slave INTF is skipped /only if/ the PPSPLIT topology is active. However, when DPU was originally submitted to mainline PPSPLIT was no longer part of it (seems to have been ripped out before submission), but this clause was incorrectly ported from the original SDE driver. Given that there is no support for PPSPLIT (currently), flushing the slave INTF should /never/ be skipped (as the `if (ppsplit && !master) goto skip;` clause downstream never becomes true). [1]: https://git.codelinaro.org/clo/la/platform/vendor/opensource/display-drivers/-/blob/display-kernel.lnx.5.4.r1-rel/msm/sde/sde_encoder_phys_cmd.c?ref_type=heads#L1131-1139 Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Marijn Suijten Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/589901/ Link: https://lore.kernel.org/r/20240417-drm-msm-initial-dualpipe-dsc-fixes-v1-3-78ae3ee9a697@somainline.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: Print dual-DSI-adjusted pclk instead of original mode pclk

2024-06-12T09:39:28+00:00

[ Upstream commit f12e0e12524a34bf145f7b80122e653ffe3d130a ] When dual-DSI (bonded DSI) was added in commit ed9976a09b48 ("drm/msm/dsi: adjust dsi timing for dual dsi mode") some DBG() prints were not updated, leading to print the original mode->clock rather than the adjusted (typically the mode clock divided by two, though more recently also adjusted for DSC compression) msm_host->pixel_clk_rate which is passed to clk_set_rate() just below. Fix that by printing the actual pixel_clk_rate that is being set. Fixes: ed9976a09b48 ("drm/msm/dsi: adjust dsi timing for dual dsi mode") Signed-off-by: Marijn Suijten Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/589896/ Link: https://lore.kernel.org/r/20240417-drm-msm-initial-dualpipe-dsc-fixes-v1-1-78ae3ee9a697@somainline.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: Account for the timeout in wait_hpd_asserted() callback

2024-05-30T07:44:48+00:00

[ Upstream commit c8520d5e5d8fe2e329f21ce04464a22b3d456caa ] The DP wait_hpd_asserted() callback is passed a timeout which indicates how long we should wait for HPD. This timeout was being ignored in the MSM DP implementation and instead a hardcoded 500 ms timeout was used. Fix it to use the proper timeout. As part of this we move the hardcoded 500 ms number into the AUX transfer function, which isn't given a timeout. The wait in the AUX transfer function will be removed in a future commit. Fixes: e2969ee30252 ("drm/msm/dp: move of_dp_aux_populate_bus() to eDP probe()") Signed-off-by: Douglas Anderson Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/583128/ Link: https://lore.kernel.org/r/20240315143621.v2.2.I7758d18a1773821fa39c034b16a12ef3f18a51ee@changeid Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: Avoid a long timeout for AUX transfer if nothing connected

2024-05-30T07:44:48+00:00

[ Upstream commit 5d1a7493343cc00d9019880b686e4e0a0f649531 ] As documented in the description of the transfer() function of "struct drm_dp_aux", the transfer() function can be called at any time regardless of the state of the DP port. Specifically if the kernel has the DP AUX character device enabled and userspace accesses "/dev/drm_dp_auxN" directly then the AUX transfer function will be called regardless of whether a DP device is connected. For eDP panels we have a special rule where we wait (with a 5 second timeout) for HPD to go high. This rule was important before all panels drivers were converted to call wait_hpd_asserted() and actually can be removed in a future commit. For external DP devices we never checked for HPD. That means that trying to access the DP AUX character device (AKA `hexdump -C /dev/drm_dp_auxN`) would very, very slowly timeout. Specifically on my system: $ time hexdump -C /dev/drm_dp_aux0 hexdump: /dev/drm_dp_aux0: Connection timed out real 0m8.200s We want access to the drm_dp_auxN character device to fail faster than 8 seconds when no DP cable is plugged in. Let's add a test to make transfers fail right away if a device isn't plugged in. Rather than testing the HPD line directly, we have the dp_display module tell us when AUX transfers should be enabled so we can handle cases where HPD is signaled out of band like with Type C. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Douglas Anderson Reviewed-by: Guenter Roeck Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/583127/ Link: https://lore.kernel.org/r/20240315143621.v2.1.I16aff881c9fe82b5e0fc06ca312da017aa7b5b3e@changeid Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: allow voltage swing / pre emphasis of 3

2024-05-30T07:44:48+00:00

[ Upstream commit 22578178e5dd6d3aa4490879df8b6c2977d980be ] Both dp_link_adjust_levels() and dp_ctrl_update_vx_px() limit swing and pre-emphasis to 2, while the real maximum value for the sum of the voltage swing and pre-emphasis is 3. Fix the DP code to remove this limitation. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Dmitry Baryshkov Reviewed-by: Kuogee Hsieh Tested-by: Kuogee Hsieh Patchwork: https://patchwork.freedesktop.org/patch/577006/ Link: https://lore.kernel.org/r/20240203-dp-swing-3-v1-1-6545e1706196@linaro.org Signed-off-by: Sasha Levin

Merge tag 'drm-msm-next-2024-04-11' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

2024-04-12T01:01:45+00:00

Fixes for v6.9 Display: - Fixes for PM refcount leak when DP goes to disconnected state and also when link training fails. This is also one of the issues found with the pm runtime series - Add missing newlines to prints in msm_fb and msm_kms - Change permissions of some dpu debugfs entries which write to const data from catalog to read-only to avoid protection faults - Fix the interface table for the catalog of X1E80100. This is an important fix to bringup DP for X1E80100. - Logging fix to print the callback symbol in the invalid IRQ message case rather than printing when its known to be NULL. - Bindings fix to add DP node as child of mdss for mdss node - Minor typo fix in DP driver API which handles port status change GPU: - fix CHRASHDUMP_READ() - fix HHB (highest bank bit) for a619 to fix UBWC corruption Signed-off-by: Dave Airlie From: Rob Clark Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvFwRUcHGWva7oDeydq1PTiZMduuykCD2MWaFrT4iMGZA@mail.gmail.com