kernel/linux.git/drivers/gpu/drm/msm, branch v6.6.100

drm/msm: Fix another leak in the submit error path

2025-07-10T14:03:15+00:00

[ Upstream commit f681c2aa8676a890eacc84044717ab0fd26e058f ] put_unused_fd() doesn't free the installed file, if we've already done fd_install(). So we need to also free the sync_file. Signed-off-by: Rob Clark Patchwork: https://patchwork.freedesktop.org/patch/653583/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: Fix a fence leak in submit error path

2025-07-10T14:03:15+00:00

[ Upstream commit 5d319f75ccf7f0927425a7545aa1a22b3eedc189 ] In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Signed-off-by: Rob Clark Patchwork: https://patchwork.freedesktop.org/patch/653584/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/gpu: Fix crash when throttling GPU immediately during boot

2025-07-06T09:00:14+00:00

commit b71717735be48d7743a34897e9e44a0b53e30c0e upstream. There is a small chance that the GPU is already hot during boot. In that case, the call to of_devfreq_cooling_register() will immediately try to apply devfreq cooling, as seen in the following crash: Unable to handle kernel paging request at virtual address 0000000000014110 pc : a6xx_gpu_busy+0x1c/0x58 [msm] lr : msm_devfreq_get_dev_status+0xbc/0x140 [msm] Call trace: a6xx_gpu_busy+0x1c/0x58 [msm] (P) devfreq_simple_ondemand_func+0x3c/0x150 devfreq_update_target+0x44/0xd8 qos_max_notifier_call+0x30/0x84 blocking_notifier_call_chain+0x6c/0xa0 pm_qos_update_target+0xd0/0x110 freq_qos_apply+0x3c/0x74 apply_constraint+0x88/0x148 __dev_pm_qos_update_request+0x7c/0xcc dev_pm_qos_update_request+0x38/0x5c devfreq_cooling_set_cur_state+0x98/0xf0 __thermal_cdev_update+0x64/0xb4 thermal_cdev_update+0x4c/0x58 step_wise_manage+0x1f0/0x318 __thermal_zone_device_update+0x278/0x424 __thermal_cooling_device_register+0x2bc/0x308 thermal_of_cooling_device_register+0x10/0x1c of_devfreq_cooling_register_power+0x240/0x2bc of_devfreq_cooling_register+0x14/0x20 msm_devfreq_init+0xc4/0x1a0 [msm] msm_gpu_init+0x304/0x574 [msm] adreno_gpu_init+0x1c4/0x2e0 [msm] a6xx_gpu_init+0x5c8/0x9c8 [msm] adreno_bind+0x2a8/0x33c [msm] ... At this point we haven't initialized the GMU at all yet, so we cannot read the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before in commit 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag accordingly. This means the df->suspended flag does not match the actual devfreq state after initialization and msm_devfreq_get_dev_status() will end up accessing GMU registers, causing the crash. Fix this by setting df->suspended correctly during initialization. Cc: stable@vger.kernel.org Fixes: 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy") Signed-off-by: Stephan Gerhold Reviewed-by: Douglas Anderson Reviewed-by: Konrad Dybcio Patchwork: https://patchwork.freedesktop.org/patch/650772/ Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman

drm/msm/dsi/dsi_phy_10nm: Fix missing initial VCO rate

2025-06-27T10:09:01+00:00

[ Upstream commit 8a48e35becb214743214f5504e726c3ec131cd6d ] Driver unconditionally saves current state on first init in dsi_pll_10nm_init(), but does not save the VCO rate, only some of the divider registers. The state is then restored during probe/enable via msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() -> dsi_10nm_pll_restore_state(). Restoring calls dsi_pll_10nm_vco_set_rate() with pll_10nm->vco_current_rate=0, which basically overwrites existing rate of VCO and messes with clock hierarchy, by setting frequency to 0 to clock tree. This makes anyway little sense - VCO rate was not saved, so should not be restored. If PLL was not configured configure it to minimum rate to avoid glitches and configuring entire in clock hierarchy to 0 Hz. Suggested-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/sz4kbwy5nwsebgf64ia7uq4ee7wbsa5uy3xmlqwcstsbntzcov@ew3dcyjdzmi2/ Signed-off-by: Krzysztof Kozlowski Fixes: a4ccc37693a2 ("drm/msm/dsi_pll_10nm: restore VCO rate during Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/654796/ Link: https://lore.kernel.org/r/20250520111325.92352-2-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/disp: Correct porch timing for SDM845

2025-06-27T10:09:01+00:00

[ Upstream commit 146e87f3e11de0dfa091ff87e34b4bc6eec761a4 ] Type-C DisplayPort inoperable due to incorrect porch settings. - Re-used wide_bus_en as flag to prevent porch shifting Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: James A. MacInnes Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/636945/ Link: https://lore.kernel.org/r/20250212-sdm845_dp-v2-2-4954e51458f4@gmail.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/a6xx: Fix stale rpmh votes from GPU

2025-04-25T08:45:52+00:00

commit f561db72a663f8a73c2250bf3244ce1ce221bed7 upstream. It was observed on sc7180 (A618 gpu) that GPU votes for GX rail and CNOC BCM nodes were not removed after GPU suspend. This was because we skipped sending 'prepare-slumber' request to gmu during suspend sequence in some cases. So, make sure we always call prepare-slumber hfi during suspend. Also, calling prepare-slumber without a prior oob-gpu handshake messes up gmu firmware's internal state. So, do that when required. Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Cc: stable@vger.kernel.org Signed-off-by: Akhil P Oommen Patchwork: https://patchwork.freedesktop.org/patch/639569/ Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman

drm/msm/dsi: Set PHY usescase (and mode) before registering DSI host

2025-04-10T12:37:28+00:00

[ Upstream commit 660c396c98c061f9696bebacc178b74072e80054 ] Ordering issues here cause an uninitialized (default STANDALONE) usecase to be programmed (which appears to be a MUX) in some cases when msm_dsi_host_register() is called, leading to the slave PLL in bonded-DSI mode to source from a clock parent (dsi1vco) that is off. This should seemingly not be a problem as the actual dispcc clocks from DSI1 that are muxed in the clock tree of DSI0 are way further down, this bit still seems to have an effect on them somehow and causes the right side of the panel controlled by DSI1 to not function. In an ideal world this code is refactored to no longer have such error-prone calls "across subsystems", and instead model the "PLL src" register field as a regular mux so that changing the clock parents programmatically or in DTS via `assigned-clock-parents` has the desired effect. But for the avid reader, the clocks that we *are* muxing into DSI0's tree are way further down, so if this bit turns out to be a simple mux between dsiXvco and out_div, that shouldn't have any effect as this whole tree is off anyway. Fixes: 57bf43389337 ("drm/msm/dsi: Pass down use case to PHY") Reviewed-by: Abhinav Kumar Reviewed-by: Dmitry Baryshkov Signed-off-by: Marijn Suijten Patchwork: https://patchwork.freedesktop.org/patch/637650/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-2-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: Use existing per-interface slice count in DSC timing

2025-04-10T12:37:28+00:00

[ Upstream commit 14ad809ceb66d0874cbe4bd5ca9edf0de8d9ad96 ] When configuring the timing of DSI hosts (interfaces) in dsi_timing_setup() all values written to registers are taking bonded-mode into account by dividing the original mode width by 2 (half the data is sent over each of the two DSI hosts), but the full width instead of the interface width is passed as hdisplay parameter to dsi_update_dsc_timing(). Currently only msm_dsc_get_slices_per_intf() is called within dsi_update_dsc_timing() with the `hdisplay` argument which clearly documents that it wants the width of a single interface (which, again, in bonded DSI mode is half the total width of the mode) resulting in all subsequent values to be completely off. However, as soon as we start to pass the halved hdisplay into dsi_update_dsc_timing() we might as well discard msm_dsc_get_slices_per_intf() since the value it calculates is already available in dsc->slice_count which is per-interface by the current design of MSM DPU/DSI implementations and their use of the DRM DSC helpers. Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Reviewed-by: Dmitry Baryshkov Reviewed-by: Jessica Zhang Signed-off-by: Marijn Suijten Patchwork: https://patchwork.freedesktop.org/patch/637648/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-1-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dpu: don't use active in atomic_check()

2025-04-10T12:37:28+00:00

[ Upstream commit 25b4614843bcc56ba150f7c99905125a019e656c ] The driver isn't supposed to consult crtc_state->active/active_check for resource allocation. Instead all resources should be allocated if crtc_state->enabled is set. Stop consulting active / active_changed in order to determine whether the hardware resources should be (re)allocated. Fixes: ccc862b957c6 ("drm/msm/dpu: Fix reservation failures in modeset") Reported-by: Simona Vetter Closes: https://lore.kernel.org/dri-devel/ZtW_S0j5AEr4g0QW@phenom.ffwll.local/ Reviewed-by: Simona Vetter Reviewed-by: Abhinav Kumar Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/633393/ Link: https://lore.kernel.org/r/20250123-drm-dirty-modeset-v2-1-bbfd3a6cd1a4@linaro.org Signed-off-by: Sasha Levin

drm/msm/dpu: Disable dither in phys encoder cleanup

2025-02-27T12:10:51+00:00

commit f063ac6b55df03ed25996bdc84d9e1c50147cfa1 upstream. Disable pingpong dither in dpu_encoder_helper_phys_cleanup(). This avoids the issue where an encoder unknowingly uses dither after reserving a pingpong block that was previously bound to an encoder that had enabled dither. Cc: stable@vger.kernel.org Reported-by: Dmitry Baryshkov Closes: https://lore.kernel.org/all/jr7zbj5w7iq4apg3gofuvcwf4r2swzqjk7sshwcdjll4mn6ctt@l2n3qfpujg3q/ Signed-off-by: Jessica Zhang Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Fixes: 3c128638a07d ("drm/msm/dpu: add support for dither block in display") Patchwork: https://patchwork.freedesktop.org/patch/636517/ Link: https://lore.kernel.org/r/20250211-dither-disable-v1-1-ac2cb455f6b9@quicinc.com Signed-off-by: Abhinav Kumar Signed-off-by: Greg Kroah-Hartman