kernel/linux.git/drivers/gpu/drm/msm, branch v6.18.21

drm/msm/dpu: Correct the SA8775P intr_underrun/intr_underrun index

2026-03-19T15:08:42+00:00

commit 4ce71cea574658f5c5c7412b1a3cc54efe4f9b50 upstream. The intr_underrun and intr_vsync indices have been swapped, just simply corrects them. Cc: stable@vger.kernel.org Fixes: b139c80d181c ("drm/msm/dpu: Add SA8775P support") Signed-off-by: Abhinav Kumar Signed-off-by: Yongxing Mou Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/709209/ Link: https://lore.kernel.org/r/20260305-mdss_catalog-v5-2-06678ac39ac7@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Greg Kroah-Hartman

drm/msm: Fix dma_free_attrs() buffer size

2026-03-19T15:08:41+00:00

commit e4eb6e4dd6348dd00e19c2275e3fbaed304ca3bd upstream. The gpummu->table buffer is alloc'd with size TABLE_SIZE + 32 in a2xx_gpummu_new() but freed with size TABLE_SIZE in a2xx_gpummu_destroy(). Change the free size to match the allocation. Fixes: c2052a4e5c99 ("drm/msm: implement a2xx mmu") Cc: Signed-off-by: Thomas Fourier Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/707340/ Message-ID: <20260226095714.12126-2-fourier.thomas@gmail.com> Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman

drm/msm/dsi: fix pclk rate calculation for bonded dsi

2026-03-19T15:08:13+00:00

[ Upstream commit e4eb11b34d6c84f398d8f08d7cb4d6c38e739dd2 ] Recently, we round up new_hdisplay once at most, for bonded dsi, we may need twice, since they are independent links, we should round up each half separately. This also aligns with the hdisplay we program later in dsi_timing_setup() Example: full_hdisplay = 1904, dsc_bpp = 8, bpc = 8 new_full_hdisplay = DIV_ROUND_UP(1904 * 8, 8 * 3) = 635 if we use half display new_half_hdisplay = DIV_ROUND_UP(952 * 8, 8 * 3) = 318 new_full_display = 636 Fixes: 7c9e4a554d4a ("drm/msm/dsi: Reduce pclk rate for compression") Signed-off-by: Pengyu Luo Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/709716/ Link: https://lore.kernel.org/r/20260306163255.215456-1-mitltlatltl@gmail.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: fix hdisplay calculation when programming dsi registers

2026-03-19T15:08:12+00:00

[ Upstream commit ac47870fd795549f03d57e0879fc730c79119f4b ] Recently, the hdisplay calculation is working for 3:1 compressed ratio only. If we have a video panel with DSC BPP = 8, and BPC = 10, we still use the default bits_per_pclk = 24, then we get the wrong hdisplay. We can draw the conclusion by cross-comparing the calculation with the calculation in dsi_adjust_pclk_for_compression(). Since CMD mode does not use this, we can remove !(msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) safely. Fixes: efcbd6f9cdeb ("drm/msm/dsi: Enable widebus for DSI") Signed-off-by: Pengyu Luo Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/704822/ Link: https://lore.kernel.org/r/20260214105145.105308-1-mitltlatltl@gmail.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: Avoid division by zero in msm_dp_ctrl_config_msa()

2026-02-26T22:59:13+00:00

[ Upstream commit f185076da44c774241a16a82a7773ece3c1c607b ] An (admittedly problematic) optimization change in LLVM 20 [1] turns known division by zero into the equivalent of __builtin_unreachable(), which invokes undefined behavior if it is encountered in a control flow graph, destroying code generation. When compile testing for x86_64, objtool flags an instance of this optimization triggering in msm_dp_ctrl_config_msa(), inlined into msm_dp_ctrl_on_stream(): drivers/gpu/drm/msm/msm.o: warning: objtool: msm_dp_ctrl_on_stream(): unexpected end of section .text.msm_dp_ctrl_on_stream The zero division happens if the else branch in the first if statement in msm_dp_ctrl_config_msa() is taken because pixel_div is initialized to zero and it is not possible for LLVM to eliminate the else branch since rate is still not known after inlining into msm_dp_ctrl_on_stream(). Transform the if statements into a switch statement with a default case with the existing error print and an early return to avoid the invalid division. Add a comment to note this helps the compiler, even though the case is known to be unreachable. With this, pixel_dev's default zero initialization can be dropped, as it is dead with this change. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Link: https://github.com/llvm/llvm-project/commit/37932643abab699e8bb1def08b7eb4eae7ff1448 [1] Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202601081959.9UVJEOfP-lkp@intel.com/ Suggested-by: Konrad Dybcio Signed-off-by: Nathan Chancellor Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/698355/ Link: https://lore.kernel.org/r/20260113-drm-msm-dp_ctrl-avoid-zero-div-v2-1-f1aa67bf6e8e@kernel.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dpu: program correct register for UBWC config on DPU 8.x+

2026-02-26T22:59:13+00:00

[ Upstream commit 5dcec3fc1311c277369a4bdf8b292781e5cc91fd ] Since DPU 8.0 there is a separate register for the second rectangle, which needs to be programmed with the UBWC config if multirect is being used. Write pipe's UBWC configuration to the correct register. Fixes: 100d7ef6995d ("drm/msm/dpu: add support for SM8450") Tested-by: Val Packett # x1e80100-dell-latitude-7455 Reviewed-by: Konrad Dybcio Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/699277/ Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-3-0987acc0427f@oss.qualcomm.com Signed-off-by: Sasha Levin

drm/msm/dpu: offset HBB values written to DPU by -13

2026-02-26T22:59:13+00:00

[ Upstream commit 7ead14d4b9742b5ed244f35b999f0fe26dc23586 ] As in all other places, the Highest Bank Bit value should be programmed into the hardware with the offset of -13. Correct the value written into the register to prevent unpredictable results. Fixes: 227d4ce0b09e ("drm/msm: Offset MDSS HBB value by 13") Tested-by: Val Packett # x1e80100-dell-latitude-7455 Reviewed-by: Konrad Dybcio Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/699276/ Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-2-0987acc0427f@oss.qualcomm.com Signed-off-by: Sasha Levin

drm/msm/mdss: correct HBB programmed on UBWC 5.x and 6.x devices

2026-02-26T22:59:13+00:00

[ Upstream commit e6177c7a2401b87b016728b75992926971d871fc ] As in the previous generations, on UBWC 5.x and 6.x devices the Highest Bank Bit value should be programmed into the hardware with the offset of -13. Correct the value written into the register to prevent unpredictable results. Fixes: 227d4ce0b09e ("drm/msm: Offset MDSS HBB value by 13") Tested-by: Val Packett # x1e80100-dell-latitude-7455 Reviewed-by: Konrad Dybcio Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/699274/ Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-1-0987acc0427f@oss.qualcomm.com Signed-off-by: Sasha Levin

drm/msm/a2xx: fix pixel shader start on A225

2026-02-26T22:59:13+00:00

[ Upstream commit 6a7b0a670ba4d283285d76d45233cbecc5af5e40 ] A225 has a different PixelShader start address, write correct address while initializing GPU. Fixes: 21af872cd8c6 ("drm/msm/adreno: add a2xx") Signed-off-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Patchwork: https://patchwork.freedesktop.org/patch/689906/ Message-ID: <20251121-a225-v1-1-a1bab651d186@oss.qualcomm.com> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi_phy_14nm: convert from divider_round_rate() to divider_determine_rate()

2026-02-26T22:59:12+00:00

[ Upstream commit 1d232f793d4dbffd329ad48b52954d4c8ca24db5 ] The divider_round_rate() function is now deprecated, so let's migrate to divider_determine_rate() instead so that this deprecated API can be removed. Note that when the main function itself was migrated to use determine_rate, this was mistakenly converted to: req->rate = divider_round_rate(...) This is invalid in the case when an error occurs since it can set the rate to a negative value. Fixes: cc41f29a6b04 ("drm/msm/dsi_phy_14nm: convert from round_rate() to determine_rate()") Signed-off-by: Brian Masney Reviewed-by: Konrad Dybcio Reviewed-by: Abel Vesa Patchwork: https://patchwork.freedesktop.org/patch/697613/ Link: https://lore.kernel.org/r/20260108-clk-divider-round-rate-v1-24-535a3ed73bf3@redhat.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin