kernel/linux.git/drivers/gpu/drm/msm, branch v6.1.70

drm/msm/dp: skip validity check for DP CTS EDID checksum

2023-11-28T17:06:57+00:00

[ Upstream commit a251c9d8e30833b260101edb9383b176ee2b7cb1 ] The DP CTS test for EDID last block checksum expects the checksum for the last block, invalid or not. Skip the validity check. For the most part (*), the EDIDs returned by drm_get_edid() will be valid anyway, and there's the CTS workaround to get the checksum for completely invalid EDIDs. See commit 7948fe12d47a ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read"). This lets us remove one user of drm_edid_block_valid() with hopes the function can be removed altogether in the future. (*) drm_get_edid() ignores checksum errors on CTA extensions. Cc: Abhinav Kumar Cc: Dmitry Baryshkov Cc: Kuogee Hsieh Cc: Marijn Suijten Cc: Rob Clark Cc: Sean Paul Cc: Stephen Boyd Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Jani Nikula Reviewed-by: Stephen Boyd Reviewed-by: Abhinav Kumar Reviewed-by: Kuogee Hsieh Patchwork: https://patchwork.freedesktop.org/patch/555361/ Link: https://lore.kernel.org/r/20230901142034.580802-1-jani.nikula@intel.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: free TX buffer in unbind

2023-11-20T10:52:01+00:00

[ Upstream commit 5e05be78264594634860087953649487f486ffcc ] If the drm/msm init code gets an error during output modeset initialisation, the kernel will report an error regarding DRM memory manager not being clean during shutdown. This is because msm_dsi_modeset_init() allocates a piece of GEM memory for the TX buffer, but destruction of the buffer happens only at msm_dsi_host_destroy(), which is called during DSI driver's remove() time, much later than the DRM MM shutdown. To solve this issue, move the TX buffer destruction to dsi_unbind(), so that the buffer is destructed at the correct time. Note, we also have to store a reference to the address space, because priv->kms->aspace is cleared before components are unbound. Reported-by: Bjorn Andersson Fixes: 8f59ee9a570c ("drm/msm/dsi: Adjust probe order") Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/562238/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi: use msm_gem_kernel_put to free TX buffer

2023-11-20T10:52:01+00:00

[ Upstream commit 69b321b2c3df4f7e51a9de587e41f324b0b717b0 ] Use exiting function to free the allocated GEM object instead of open-coding it. This has a bonus of internally calling msm_gem_put_vaddr() to compensate for msm_gem_get_vaddr() in msm_get_kernel_new(). Fixes: 1e29dff00400 ("drm/msm: Add a common function to free kernel buffer objects") Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/562239/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: Add newlines to debug printks

2023-10-19T21:08:52+00:00

[ Upstream commit eba8c99a0fc45da1c8d5b5f5bd1dc2e79229a767 ] These debug printks are missing newlines, causing drm debug logs to be hard to read. Add newlines so that the messages are on their own line. Cc: Kuogee Hsieh Cc: Vinod Polimera Signed-off-by: Stephen Boyd Fixes: 601f0479c583 ("drm/msm/dp: add logs across DP driver for ease of debugging") Fixes: cd779808cccd ("drm/msm/dp: Add basic PSR support for eDP") Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/554533/ Link: https://lore.kernel.org/r/20230825230109.2264345-1-swboyd@chromium.org Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow

2023-10-19T21:08:52+00:00

[ Upstream commit 95e681ca3b65e4ce3d2537b47672d787b7d30375 ] _dpu_plane_calc_bw() uses integer variables to calculate the bandwidth used during plane bandwidth calculations. However for high resolution displays this overflows easily and leads to below errors [dpu error]crtc83 failed performance check -7 Promote the intermediate variables to u64 to avoid overflow. changes in v2: - change to u64 where actually needed in the math Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Reviewed-by: Dmitry Baryshkov Reported-by: Nia Espera Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/32 Tested-by: Nia Espera Patchwork: https://patchwork.freedesktop.org/patch/556288/ Link: https://lore.kernel.org/r/20230908012616.20654-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dsi: fix irq_of_parse_and_map() error checking

2023-10-19T21:08:52+00:00

[ Upstream commit 6a1d4c7976dd1ee7c9f80bc8e62801ec7b1f2f58 ] The irq_of_parse_and_map() function returns zero on error. It never returns negative error codes. Fix the check. Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Signed-off-by: Dan Carpenter Reviewed-by: Konrad Dybcio Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/557715/ Link: https://lore.kernel.org/r/4f3c5c98-04f7-43f7-900f-5d7482c83eef@moroto.mountain Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dsi: skip the wait for video mode done if not applicable

2023-10-19T21:08:52+00:00

[ Upstream commit ab483e3adcc178254eb1ce0fbdfbea65f86f1006 ] dsi_wait4video_done() API waits for the DSI video mode engine to become idle so that we can transmit the DCS commands in the beginning of BLLP. However, with the current sequence, the MDP timing engine is turned on after the panel's pre_enable() callback which can send out the DCS commands needed to power up the panel. During those cases, this API will always timeout and print out the error spam leading to long bootup times and log flooding. Fix this by checking if the DSI video engine was actually busy before waiting for it to become idle otherwise this is a redundant wait. changes in v2: - move the reg read below the video mode check - minor fixes in commit text Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/34 Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Signed-off-by: Abhinav Kumar Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/557853/ Link: https://lore.kernel.org/r/20230915204426.19011-1-quic_abhinavk@quicinc.com Signed-off-by: Sasha Levin

drm/msm/dp: do not reinitialize phy unless retry during link training

2023-10-19T21:08:52+00:00

[ Upstream commit 0c1a2e69bcb506f48ebf94bd199bab0b93f66da2 ] DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will cause PLL unlocked initially and then PLL gets locked at the end of initialization. PLL_UNLOCKED interrupt will fire during this time if the interrupt mask is enabled. However currently DP driver link training implementation incorrectly re-initializes PHY unconditionally during link training as the PHY was already configured in dp_ctrl_enable_mainlink_clocks(). Fix this by re-initializing the PHY only if the previous link training failed. [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30 Signed-off-by: Kuogee Hsieh Tested-by: Abhinav Kumar # sc7280 Reviewed-by: Abhinav Kumar Reviewed-by: Stephen Boyd Reviewed-by: Dmitry Baryshkov Tested-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/551847/ Link: https://lore.kernel.org/r/1691533190-19335-1-git-send-email-quic_khsieh@quicinc.com [quic_abhinavk@quicinc.com: added line break in commit text] Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/a2xx: Call adreno_gpu_init() earlier

2023-09-13T07:42:42+00:00

[ Upstream commit db07ce5da8b26bfeaf437a676ae49bd3bb1eace6 ] The adreno_is_a20x() and adreno_is_a225() functions rely on the GPU revision, but such information is retrieved inside adreno_gpu_init(), which is called afterwards. Fix this problem by caling adreno_gpu_init() earlier, so that the GPU information revision is available when adreno_is_a20x() and adreno_is_a225() run. Tested on a imx53-qsb board. Fixes: 21af872cd8c6 ("drm/msm/adreno: add a2xx") Signed-off-by: Fabio Estevam Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/543456/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dpu: fix the irq index in dpu_encoder_phys_wb_wait_for_commit_done

2023-09-13T07:42:42+00:00

[ Upstream commit d93cf453f51da168f4410ba73656f1e862096973 ] Since commit 1e7ac595fa46 ("drm/msm/dpu: pass irq to dpu_encoder_helper_wait_for_irq()") the dpu_encoder_phys_wb_wait_for_commit_done expects the IRQ index rather than the IRQ index in phys_enc->intr table, however writeback got the older invocation in place. This was unnoticed for several releases, but now it's time to fix it. Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/550924/ Link: https://lore.kernel.org/r/20230802100426.4184892-2-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin