kernel/linux.git/drivers/gpu/drm/msm, branch v5.4.113

drm/msm: Set drvdata to NULL when msm_drm_init() fails

2021-04-14T06:24:16+00:00

[ Upstream commit 5620b135aea49a8f41c86aaecfcb1598a7774121 ] We should set the platform device's driver data to NULL here so that code doesn't assume the struct drm_device pointer is valid when it could have been destroyed. The lifetime of this pointer is managed by a kref but when msm_drm_init() fails we call drm_dev_put() on the pointer which will free the pointer's memory. This driver uses the component model, so there's sort of two "probes" in this file, one for the platform device i.e. msm_pdev_probe() and one for the component i.e. msm_drm_bind(). The msm_drm_bind() code is using the platform device's driver data to store struct drm_device so the two functions are intertwined. This relationship becomes a problem for msm_pdev_shutdown() when it tests the NULL-ness of the pointer to see if it should call drm_atomic_helper_shutdown(). The NULL test is a proxy check for if the pointer has been freed by kref_put(). If the drm_device has been destroyed, then we shouldn't call the shutdown helper, and we know that is the case if msm_drm_init() failed, therefore set the driver data to NULL so that this pointer liveness is tracked properly. Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver") Cc: Dmitry Baryshkov Cc: Fabio Estevam Cc: Krishna Manikandan Signed-off-by: Stephen Boyd Message-Id: <20210325212822.3663144-1-swboyd@chromium.org> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: Ratelimit invalid-fence message

2021-04-10T11:34:31+00:00

[ Upstream commit 7ad48d27a2846bfda29214fb454d001c3e02b9e7 ] We have seen a couple cases where low memory situations cause something bad to happen, followed by a flood of these messages obscuring the root cause. Lets ratelimit the dmesg spam so that next time it happens we don't lose the kernel traces leading up to this. Signed-off-by: Rob Clark Reviewed-by: Douglas Anderson Signed-off-by: Sasha Levin

drm/msm/adreno: a5xx_power: Don't apply A540 lm_setup to other GPUs

2021-04-10T11:34:30+00:00

[ Upstream commit 4a9d36b0610aa7034340e976652e5b43320dd7c5 ] While passing the A530-specific lm_setup func to A530 and A540 to !A530 was fine back when only these two were supported, it certainly is not a good idea to send A540 specifics to smaller GPUs like A508 and friends. Signed-off-by: Konrad Dybcio Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: fix shutdown hook in case GPU components failed to bind

2021-03-30T12:35:27+00:00

[ Upstream commit 623f279c77811475ac8fd5635cc4e4451aa71291 ] If GPU components have failed to bind, shutdown callback would fail with the following backtrace. Add safeguard check to stop that oops from happening and allow the board to reboot. [ 66.617046] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 66.626066] Mem abort info: [ 66.628939] ESR = 0x96000006 [ 66.632088] EC = 0x25: DABT (current EL), IL = 32 bits [ 66.637542] SET = 0, FnV = 0 [ 66.640688] EA = 0, S1PTW = 0 [ 66.643924] Data abort info: [ 66.646889] ISV = 0, ISS = 0x00000006 [ 66.650832] CM = 0, WnR = 0 [ 66.653890] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107f81000 [ 66.660505] [0000000000000000] pgd=0000000100bb2003, p4d=0000000100bb2003, pud=0000000100897003, pmd=0000000000000000 [ 66.671398] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 66.677115] Modules linked in: [ 66.680261] CPU: 6 PID: 352 Comm: reboot Not tainted 5.11.0-rc2-00309-g79e3faa756b2 #38 [ 66.688473] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) [ 66.695347] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 66.701507] pc : msm_atomic_commit_tail+0x78/0x4e0 [ 66.706437] lr : commit_tail+0xa4/0x184 [ 66.710381] sp : ffff8000108f3af0 [ 66.713791] x29: ffff8000108f3af0 x28: ffff418c44337000 [ 66.719242] x27: 0000000000000000 x26: ffff418c40a24490 [ 66.724693] x25: ffffd3a842a4f1a0 x24: 0000000000000008 [ 66.730146] x23: ffffd3a84313f030 x22: ffff418c444ce000 [ 66.735598] x21: ffff418c408a4980 x20: 0000000000000000 [ 66.741049] x19: 0000000000000000 x18: ffff800010710fbc [ 66.746500] x17: 000000000000000c x16: 0000000000000001 [ 66.751954] x15: 0000000000010008 x14: 0000000000000068 [ 66.757405] x13: 0000000000000001 x12: 0000000000000000 [ 66.762855] x11: 0000000000000001 x10: 00000000000009b0 [ 66.768306] x9 : ffffd3a843192000 x8 : ffff418c44337000 [ 66.773757] x7 : 0000000000000000 x6 : 00000000a401b34e [ 66.779210] x5 : 00ffffffffffffff x4 : 0000000000000000 [ 66.784660] x3 : 0000000000000000 x2 : ffff418c444ce000 [ 66.790111] x1 : ffffd3a841dce530 x0 : ffff418c444cf000 [ 66.795563] Call trace: [ 66.798075] msm_atomic_commit_tail+0x78/0x4e0 [ 66.802633] commit_tail+0xa4/0x184 [ 66.806217] drm_atomic_helper_commit+0x160/0x390 [ 66.811051] drm_atomic_commit+0x4c/0x60 [ 66.815082] drm_atomic_helper_disable_all+0x1f4/0x210 [ 66.820355] drm_atomic_helper_shutdown+0x80/0x130 [ 66.825276] msm_pdev_shutdown+0x14/0x20 [ 66.829303] platform_shutdown+0x28/0x40 [ 66.833330] device_shutdown+0x158/0x330 [ 66.837357] kernel_restart+0x40/0xa0 [ 66.841122] __do_sys_reboot+0x228/0x250 [ 66.845148] __arm64_sys_reboot+0x28/0x34 [ 66.849264] el0_svc_common.constprop.0+0x74/0x190 [ 66.854187] do_el0_svc+0x24/0x90 [ 66.857595] el0_svc+0x14/0x20 [ 66.860739] el0_sync_handler+0x1a4/0x1b0 [ 66.864858] el0_sync+0x174/0x180 [ 66.868269] Code: 1ac020a0 2a000273 eb02007f 54ffff01 (f9400285) [ 66.874525] ---[ end trace 20dedb2a3229fec8 ]--- Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver") Signed-off-by: Dmitry Baryshkov Signed-off-by: Fabio Estevam Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/a5xx: Remove overwriting A5XX_PC_DBG_ECO_CNTL register

2021-03-11T13:06:50+00:00

[ Upstream commit 8f03c30cb814213e36032084a01f49a9e604a3e3 ] The PC_DBG_ECO_CNTL register on the Adreno A5xx family gets programmed to some different values on a per-model basis. At least, this is what we intend to do here; Unfortunately, though, this register is being overwritten with a static magic number, right after applying the GPU-specific configuration (including the GPU-specific quirks) and that is effectively nullifying the efforts. Let's remove the redundant and wrong write to the PC_DBG_ECO_CNTL register in order to retain the wanted configuration for the target GPU. Signed-off-by: AngeloGioacchino Del Regno Reviewed-by: Jordan Crouse Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/mdp5: Fix wait-for-commit for cmd panels

2021-03-04T09:26:37+00:00

[ Upstream commit 68e4f01fddb4ead80e8c7084db489307f22c9cbb ] Before the offending commit in msm_atomic_commit_tail wait_flush was called once per frame, after the commit was submitted. After it wait_flush is also called at the beginning to ensure previous potentially async commits are done. For cmd panels the source of wait_flush is a ping-pong irq notifying a completion. The completion needs to be notified with complete_all so multiple waiting parties (new async committers) can proceed. Signed-off-by: Iskren Chernev Suggested-by: Rob Clark Fixes: 2d99ced787e3d ("drm/msm: async commit support") Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi: Correct io_start for MSM8994 (20nm PHY)

2021-03-04T09:26:37+00:00

[ Upstream commit 33a7808ce1aea6e2edc1af25db25928137940c02 ] The previous registers were *almost* correct, but instead of PHYs, they were pointing at DSI PLLs, resulting in the PHY id autodetection failing miserably. Fixes: dcefc117cc19 ("drm/msm/dsi: Add support for msm8x94") Signed-off-by: Konrad Dybcio Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: Call msm_init_vram before binding the gpu

2021-01-19T17:26:16+00:00

[ Upstream commit d863f0c7b536288e2bd40cbc01c10465dd226b11 ] vram.size is needed when binding a gpu without an iommu and is defined in msm_init_vram(), so run that before binding it. Signed-off-by: Craig Tatlor Reviewed-by: Brian Masney Tested-by: Alexey Minnekhanov Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi_pll_10nm: restore VCO rate during restore_state

2020-12-30T10:51:04+00:00

[ Upstream commit a4ccc37693a271330a46208afbeaed939d54fdbb ] PHY disable/enable resets PLL registers to default values. Thus in addition to restoring several registers we also need to restore VCO rate settings. Signed-off-by: Dmitry Baryshkov Fixes: c6659785dfb3 ("drm/msm/dsi/pll: call vco set rate explicitly") Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/a6xx: fix a potential overflow issue

2020-10-29T08:58:06+00:00

[ Upstream commit 08d3ab4b46339bc6f97e83b54a3fb4f8bf8f4cd9 ] It's allocating an array of a6xx_gpu_state_obj structure rathor than its pointers. This patch fix it. Signed-off-by: Zhenzhong Duan Signed-off-by: Rob Clark Signed-off-by: Sasha Levin