kernel/linux.git/drivers/gpu/drm/msm, branch v5.15.209

drm/msm/snapshot: fix dumping of the unaligned regions

2026-06-01T15:35:50+00:00

[ Upstream commit 76824d2467feb1828b745d6add2541918d7be3da ] The snapshotting code internally aligns data segment to 16 bytes. This works fine for DPU code (where most of the regions are aligned), but fails for snapshotting of the DSI data (because DSI data region is shifted by 4 bytes). Fix the code by removing length alignment and by accurately printing last registers in the region. While reworking the code also fix the 16x memory overallocation in msm_disp_state_dump_regs(). Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Reported-by: Salendarsingh Gaud Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/725449/ Message-ID: <20260516-msm-fix-dsi-dump-2-v2-1-9e49fb2d240e@oss.qualcomm.com> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: Fix iommu_map_sgtable() return value check and avoid WARN

2026-06-01T15:35:50+00:00

[ Upstream commit 55e0f0d1c1a4ee1e46da7da4d443eb3044fb3851 ] Commit "iommu: return full error code from iommu_map_sg[_atomic]()" changed iommu_map_sgtable() to return an ssize_t and negative values in error cases, rather than a size_t and a zero. Store the return value in the appropriate type and in case of error, return it rather than WARNing. Fixes: ad8f36e4b6b1 ("iommu: return full error code from iommu_map_sg[_atomic]()") Signed-off-by: Mikko Perttunen Patchwork: https://patchwork.freedesktop.org/patch/719685/ Message-ID: <20260421-iommu_map_sgtable-return-v1-3-fb484c07d2a1@nvidia.com> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/a6xx: Use barriers while updating HFI Q headers

2026-06-01T15:35:31+00:00

[ Upstream commit dc78b35d5ec09d1b0b8a937e6e640d2c5a030915 ] To avoid harmful compiler optimizations and IO reordering in the HW, use barriers and READ/WRITE_ONCE helpers as necessary while accessing the HFI queue index variables. Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Signed-off-by: Akhil P Oommen Patchwork: https://patchwork.freedesktop.org/patch/714653/ Message-ID: <20260327-a8xx-gpu-batch2-v2-1-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/a6xx: Fix HLSQ register dumping

2026-06-01T15:35:31+00:00

[ Upstream commit c289a6db9ba6cb974f0317da142e4f665d589566 ] Fix the bitfield offset of HLSQ_READ_SEL state-type bitfield. Otherwise we are always reading TP state when we wanted SP or HLSQ state. Reported-by: Connor Abbott Suggested-by: Connor Abbott Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state") Signed-off-by: Rob Clark Patchwork: https://patchwork.freedesktop.org/patch/714236/ Message-ID: <20260325184043.1259312-1-robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin

drm/msm/dsi: rename MSM8998 DSI version from V2_2_0 to V2_0_0

2026-06-01T15:35:30+00:00

[ Upstream commit 913a709dea0eff9c7b2e9470f8c8594b9a0114ab ] The MSM8998 DSI controller is v2.0.0 as stated in commit 7b8c9e203039 ("drm/msm/dsi: Add support for MSM8998 DSI controller"). The value was always correct just the name was wrong. Rename and reorder to maintain version sorting. Fixes: 7b8c9e203039 ("drm/msm/dsi: Add support for MSM8998 DSI controller") Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Signed-off-by: Alexander Koskovich Patchwork: https://patchwork.freedesktop.org/patch/713717/ Link: https://lore.kernel.org/r/20260324-dsi-rgb101010-support-v5-3-ff6afc904115@pm.me Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/a6xx: Fix out of bound IO access in a6xx_get_gmu_registers

2026-01-19T12:10:03+00:00

commit 779b68a5bf2764c8ed3aa800e41ba0d5d007e1e7 upstream. REG_A6XX_GMU_AO_AHB_FENCE_CTRL register falls under GMU's register range. So, use gmu_write() routines to write to this register. Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state") Cc: stable@vger.kernel.org Signed-off-by: Akhil P Oommen Reviewed-by: Konrad Dybcio Patchwork: https://patchwork.freedesktop.org/patch/688993/ Message-ID: <20251118-kaana-gpu-support-v4-1-86eeb8e93fb6@oss.qualcomm.com> Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman

drm/msm: make sure to not queue up recovery more than once

2025-12-06T21:09:21+00:00

[ Upstream commit 10fb1b2fcaee5545a5e54db1ed4d7b15c2db50c8 ] If two fault IRQs arrive in short succession recovery work will be queued up twice. When recovery runs a second time it may end up killing an unrelated context. Prevent this by masking off interrupts when triggering recovery. Signed-off-by: Antonino Maniscalco Reviewed-by: Akhil P Oommen Patchwork: https://patchwork.freedesktop.org/patch/670023/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi/phy_7nm: Fix missing initial VCO rate

2025-12-06T21:09:20+00:00

[ Upstream commit 5ddcb0cb9d10e6e70a68e0cb8f0b8e3a7eb8ccaf ] Driver unconditionally saves current state on first init in dsi_pll_7nm_init(), but does not save the VCO rate, only some of the divider registers. The state is then restored during probe/enable via msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() -> dsi_7nm_pll_restore_state(). Restoring calls dsi_pll_7nm_vco_set_rate() with pll_7nm->vco_current_rate=0, which basically overwrites existing rate of VCO and messes with clock hierarchy, by setting frequency to 0 to clock tree. This makes anyway little sense - VCO rate was not saved, so should not be restored. If PLL was not configured configure it to minimum rate to avoid glitches and configuring entire in clock hierarchy to 0 Hz. Reviewed-by: Dmitry Baryshkov Signed-off-by: Krzysztof Kozlowski Patchwork: https://patchwork.freedesktop.org/patch/657827/ Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-9-ee633e3ddbff@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi/phy: Toggle back buffer resync after preparing PLL

2025-12-06T21:09:20+00:00

[ Upstream commit b63f008f395ca5f6bc89123db97440bdc19981c4 ] According to Hardware Programming Guide for DSI PHY, the retime buffer resync should be done after PLL clock users (byte_clk and intf_byte_clk) are enabled. Downstream also does it as part of configuring the PLL. Driver was only turning off the resync FIFO buffer, but never bringing it on again. Reviewed-by: Dmitry Baryshkov Signed-off-by: Krzysztof Kozlowski Patchwork: https://patchwork.freedesktop.org/patch/657823/ Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-6-ee633e3ddbff@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/a6xx: Fix GMU firmware parser

2025-12-06T21:09:13+00:00

[ Upstream commit b4789aac9d3441d9f830f0a4022d8dc122d6cab3 ] Current parser logic for GMU firmware assumes a dword aligned payload size for every block. This is not true for all GMU firmwares. So, fix this by using correct 'size' value in the calculation for the offset for the next block's header. Fixes: c6ed04f856a4 ("drm/msm/a6xx: A640/A650 GMU firmware path") Signed-off-by: Akhil P Oommen Acked-by: Konrad Dybcio Patchwork: https://patchwork.freedesktop.org/patch/674040/ Message-ID: <20250911-assorted-sept-1-v2-2-a8bf1ee20792@oss.qualcomm.com> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin