kernel/linux.git/drivers/gpu/drm/msm, branch v5.14.8

drm/msm/disp/dpu1: add safe lut config in dpu driver

2021-09-18T11:44:04+00:00

commit 5bccb945f38b2aff334619b23b50bb0a6a9995a5 upstream. Add safe lut configuration for all the targets in dpu driver as per QOS recommendation. Issue reported on SC7280: With wait-for-safe feature in smmu enabled, RT client buffer levels are checked to be safe before smmu invalidation. Since display was always set to unsafe it was delaying the invalidaiton process thus impacting the performance on NRT clients such as eMMC and NVMe. Validated this change on SC7280, With this change eMMC performance has improved significantly. Changes in v2: - Add fixes tag (Sai) - CC stable kernel (Dimtry) Changes in v3: - Correct fixes tag with appropriate hash (stephen) - Resend patch adding reviewed by tag - Resend patch adding correct format for pushing into stable tree (Greg) Fixes: 591e34a091d1 ("drm/msm/disp/dpu1: add support for display for SC7280 target") Cc: stable@vger.kernel.org Signed-off-by: Kalyan Thota Reviewed-by: Dmitry Baryshkov Tested-by: Sai Prakash Ranjan (sc7280, sc7180) Link: https://lore.kernel.org/r/1628070028-2616-1-git-send-email-kalyan_t@codeaurora.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman

drm/msi/mdp4: populate priv->kms in mdp4_kms_init

2021-09-18T11:44:03+00:00

commit cb0927ab80d224c9074f53d1a55b087d12ec5a85 upstream. Without this fix boot throws NULL ptr exception at msm_dsi_manager_setup_encoder on devices like Nexus 7 2013 (MDP4 v4.4). Fixes: 03436e3ec69c ("drm/msm/dsi: Move setup_encoder to modeset_init") Cc: Signed-off-by: David Heidelberg Link: https://lore.kernel.org/r/20210811170631.39296-1-david@ixit.cz Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman

drm/msm/dp: do not end dp link training until video is ready

2021-09-18T11:43:50+00:00

[ Upstream commit 2e0adc765d884cc080baa501e250bfad97035b09 ] Initialize both pre-emphasis and voltage swing level to 0 before start link training and do not end link training until video is ready to reduce the period between end of link training and video start to meet Link Layer CTS requirement. Some dongle main link symbol may become unlocked again if host did not end link training soon enough after completion of link training 2. Host have to re train main link if loss of symbol locked detected before end link training so that the coming video stream can be transmitted to sink properly. This fixes Link Layer CTS cases 4.3.2.1, 4.3.2.2, 4.3.2.3 and 4.3.2.4. Changes in v3: -- merge retrain link if loss of symbol locked happen into this patch -- replace dp_ctrl_loss_symbol_lock() with dp_ctrl_channel_eq_ok() Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1628196295-7382-7-git-send-email-khsieh@codeaurora.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: return correct edid checksum after corrupted edid checksum read

2021-09-18T11:43:49+00:00

[ Upstream commit 7948fe12d47a946fb8025a0534c900e3dd4b5839 ] Response with correct edid checksum saved at connector after corrupted edid checksum read. This fixes Link Layer CTS cases 4.2.2.3, 4.2.2.6. Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1628196295-7382-6-git-send-email-khsieh@codeaurora.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: reset aux controller after dp_aux_cmd_fifo_tx() failed.

2021-09-18T11:43:49+00:00

[ Upstream commit 0b324564ff74fa0556002be8fbbace556b9b2ad0 ] Aux hardware calibration sequence requires resetting the aux controller in order for the new setting to take effect. However resetting the AUX controller will also clear HPD interrupt status which may accidentally cause pending unplug interrupt to get lost. Therefore reset aux controller only when link is in connection state when dp_aux_cmd_fifo_tx() fail. This fixes Link Layer CTS cases 4.2.1.1 and 4.2.1.2. Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1628196295-7382-4-git-send-email-khsieh@codeaurora.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: reduce link rate if failed at link training 1

2021-09-18T11:43:49+00:00

[ Upstream commit 4b85d405cfe938ae7ad61656484ae88dee289e3b ] Reduce link rate and re start link training if link training 1 failed due to loss of clock recovery done to fix Link Layer CTS case 4.3.1.7. Also only update voltage and pre-emphasis swing level after link training started to fix Link Layer CTS case 4.3.1.6. Changes in V2: -- replaced cr_status with link_status[DP_LINK_STATUS_SIZE] -- replaced dp_ctrl_any_lane_cr_done() with dp_ctrl_colco_recovery_any_ok() -- replaced dp_ctrl_any_ane_cr_lose() with !drm_dp_clock_recovery_ok() Changes in V3: -- return failed if lane_count <= 1 Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1628196295-7382-3-git-send-email-khsieh@codeaurora.org [remove unused cr_status variable] Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660

2021-09-18T11:43:48+00:00

[ Upstream commit 462f7017a6918d152870bfb8852f3c70fd74b296 ] VDDA is not present and the specified load value is wrong. Fix it. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20210728222057.52641-1-konrad.dybcio@somainline.org Reviewed-by: Dmitry Baryshkov Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: mdp4: drop vblank get/put from prepare/complete_commit

2021-09-18T11:43:48+00:00

[ Upstream commit 56bd931ae506730c9ab1e4cc4bfefa43fc2d18fa ] msm_atomic is doing vblank get/put's already, currently there no need to duplicate the effort in MDP4 Fix warning: ... WARNING: CPU: 3 PID: 79 at drivers/gpu/drm/drm_vblank.c:1194 drm_vblank_put+0x1cc/0x1d4 ... and multiple vblank time-outs: ... msm 5100000.mdp: vblank time out, crtc=1 ... Tested on Nexus 7 2013 (deb), LTS 5.10.50. Introduced by: 119ecb7fd3b5 ("drm/msm/mdp4: request vblank during modeset") Signed-off-by: David Heidelberg Link: https://lore.kernel.org/r/20210715060925.7880-1-david@ixit.cz Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/a6xx: Fix llcc configuration for a660 gpu

2021-09-18T11:43:44+00:00

[ Upstream commit a6f24383f6c0a8d64d1f6afa10733ae4e8f236e0 ] Add the missing scache_cntl0 register programing which is required for a660 gpu. Signed-off-by: Akhil P Oommen Link: https://lore.kernel.org/r/20210730011945.v4.1.I110b87677ef16d97397fb7c81c07a16e1f5d211e@changeid Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: replug event is converted into an unplug followed by an plug events

2021-09-15T08:02:21+00:00

[ Upstream commit 7e10bf427850f2d7133fd091999abd5fc1755cdb ] Remove special handling of replug interrupt and instead treat replug event as a sequential unplug followed by a plugin event. This is needed to meet the requirements of DP Link Layer CTS test case 4.2.1.3. Changes in V2: -- add fixes statement Changes in V3: -- delete EV_HPD_REPLUG_INT Fixes: f21c8a276c2d ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1628196295-7382-5-git-send-email-khsieh@codeaurora.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin