kernel/linux.git/drivers/gpu/drm/msm, branch v5.10.258

drm/msm/a6xx: Use barriers while updating HFI Q headers

2026-06-01T15:29:33+00:00

[ Upstream commit dc78b35d5ec09d1b0b8a937e6e640d2c5a030915 ] To avoid harmful compiler optimizations and IO reordering in the HW, use barriers and READ/WRITE_ONCE helpers as necessary while accessing the HFI queue index variables. Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Signed-off-by: Akhil P Oommen Patchwork: https://patchwork.freedesktop.org/patch/714653/ Message-ID: <20260327-a8xx-gpu-batch2-v2-1-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/a6xx: Fix HLSQ register dumping

2026-06-01T15:29:33+00:00

[ Upstream commit c289a6db9ba6cb974f0317da142e4f665d589566 ] Fix the bitfield offset of HLSQ_READ_SEL state-type bitfield. Otherwise we are always reading TP state when we wanted SP or HLSQ state. Reported-by: Connor Abbott Suggested-by: Connor Abbott Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state") Signed-off-by: Rob Clark Patchwork: https://patchwork.freedesktop.org/patch/714236/ Message-ID: <20260325184043.1259312-1-robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin

drm/msm/dsi: rename MSM8998 DSI version from V2_2_0 to V2_0_0

2026-06-01T15:29:32+00:00

[ Upstream commit 913a709dea0eff9c7b2e9470f8c8594b9a0114ab ] The MSM8998 DSI controller is v2.0.0 as stated in commit 7b8c9e203039 ("drm/msm/dsi: Add support for MSM8998 DSI controller"). The value was always correct just the name was wrong. Rename and reorder to maintain version sorting. Fixes: 7b8c9e203039 ("drm/msm/dsi: Add support for MSM8998 DSI controller") Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Signed-off-by: Alexander Koskovich Patchwork: https://patchwork.freedesktop.org/patch/713717/ Link: https://lore.kernel.org/r/20260324-dsi-rgb101010-support-v5-3-ff6afc904115@pm.me Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm: Fix dma_free_attrs() buffer size

2026-04-18T08:31:00+00:00

[ Upstream commit e4eb6e4dd6348dd00e19c2275e3fbaed304ca3bd ] The gpummu->table buffer is alloc'd with size TABLE_SIZE + 32 in a2xx_gpummu_new() but freed with size TABLE_SIZE in a2xx_gpummu_destroy(). Change the free size to match the allocation. Fixes: c2052a4e5c99 ("drm/msm: implement a2xx mmu") Cc: Signed-off-by: Thomas Fourier Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/707340/ Message-ID: <20260226095714.12126-2-fourier.thomas@gmail.com> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

drm/msm/a6xx: Fix out of bound IO access in a6xx_get_gmu_registers

2026-01-19T12:11:59+00:00

commit 779b68a5bf2764c8ed3aa800e41ba0d5d007e1e7 upstream. REG_A6XX_GMU_AO_AHB_FENCE_CTRL register falls under GMU's register range. So, use gmu_write() routines to write to this register. Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state") Cc: stable@vger.kernel.org Signed-off-by: Akhil P Oommen Reviewed-by: Konrad Dybcio Patchwork: https://patchwork.freedesktop.org/patch/688993/ Message-ID: <20251118-kaana-gpu-support-v4-1-86eeb8e93fb6@oss.qualcomm.com> Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman

drm/msm/a6xx: Fix GMU firmware parser

2025-12-06T21:08:07+00:00

[ Upstream commit b4789aac9d3441d9f830f0a4022d8dc122d6cab3 ] Current parser logic for GMU firmware assumes a dword aligned payload size for every block. This is not true for all GMU firmwares. So, fix this by using correct 'size' value in the calculation for the offset for the next block's header. Fixes: c6ed04f856a4 ("drm/msm/a6xx: A640/A650 GMU firmware path") Signed-off-by: Akhil P Oommen Acked-by: Konrad Dybcio Patchwork: https://patchwork.freedesktop.org/patch/674040/ Message-ID: <20250911-assorted-sept-1-v2-2-a8bf1ee20792@oss.qualcomm.com> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

minmax: add in_range() macro

2025-10-29T13:01:15+00:00

[ Upstream commit f9bff0e31881d03badf191d3b0005839391f5f2b ] Patch series "New page table range API", v6. This patchset changes the API used by the MM to set up page table entries. The four APIs are: set_ptes(mm, addr, ptep, pte, nr) update_mmu_cache_range(vma, addr, ptep, nr) flush_dcache_folio(folio) flush_icache_pages(vma, page, nr) flush_dcache_folio() isn't technically new, but no architecture implemented it, so I've done that for them. The old APIs remain around but are mostly implemented by calling the new interfaces. The new APIs are based around setting up N page table entries at once. The N entries belong to the same PMD, the same folio and the same VMA, so ptep++ is a legitimate operation, and locking is taken care of for you. Some architectures can do a better job of it than just a loop, but I have hesitated to make too deep a change to architectures I don't understand well. One thing I have changed in every architecture is that PG_arch_1 is now a per-folio bit instead of a per-page bit when used for dcache clean/dirty tracking. This was something that would have to happen eventually, and it makes sense to do it now rather than iterate over every page involved in a cache flush and figure out if it needs to happen. The point of all this is better performance, and Fengwei Yin has measured improvement on x86. I suspect you'll see improvement on your architecture too. Try the new will-it-scale test mentioned here: https://lore.kernel.org/linux-mm/20230206140639.538867-5-fengwei.yin@intel.com/ You'll need to run it on an XFS filesystem and have CONFIG_TRANSPARENT_HUGEPAGE set. This patchset is the basis for much of the anonymous large folio work being done by Ryan, so it's received quite a lot of testing over the last few months. This patch (of 38): Determine if a value lies within a range more efficiently (subtraction + comparison vs two comparisons and an AND). It also has useful (under some circumstances) behaviour if the range exceeds the maximum value of the type. Convert all the conflicting definitions of in_range() within the kernel; some can use the generic definition while others need their own definition. Link: https://lkml.kernel.org/r/20230802151406.3735276-1-willy@infradead.org Link: https://lkml.kernel.org/r/20230802151406.3735276-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) Signed-off-by: Andrew Morton Signed-off-by: Eliav Farber Signed-off-by: Greg Kroah-Hartman

drm/msm/dpu: don't select single flush for active CTL blocks

2025-06-27T10:04:17+00:00

[ Upstream commit e93eee524bb78f3ee4b78654d0083382f98b3d23 ] In case of ACTIVE CTLs, a single CTL is being used for flushing all INTF blocks. Don't skip programming the CTL on those targets. Tested-by: Neil Armstrong # on SM8550-QRD Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/641585/ Link: https://lore.kernel.org/r/20250307-dpu-active-ctl-v3-5-5d20655f10ca@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/a6xx: Increase HFI response timeout

2025-06-27T10:04:16+00:00

[ Upstream commit 5f02f5e78ec9688e29b6857813185b1181796abe ] When ACD feature is enabled, it triggers some internal calibrations which result in a pretty long delay during the first HFI perf vote. So, increase the HFI response timeout to match the downstream driver. Signed-off-by: Akhil P Oommen Tested-by: Maya Matuszczyk Tested-by: Anthony Ruhier Patchwork: https://patchwork.freedesktop.org/patch/649344/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/hdmi: add runtime PM calls to DDC transfer function

2025-06-27T10:04:16+00:00

[ Upstream commit 531b4e2c206e5f7dead04d9da84dfa693ac57481 ] We must be sure that the HDMI controller is powered on, while performing the DDC transfer. Add corresponding runtime PM calls to msm_hdmi_i2c_xfer(). Reviewed-by: Jessica Zhang Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/651727/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-8-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin