kernel/linux.git/drivers/gpu/drm/msm/hdmi, branch linux-5.11.y

drm/msm: sync generated headers

2020-07-31T13:46:16+00:00

We haven't sync'd for a while.. pull in updates to get definitions for some fields in pkt7 payloads. Signed-off-by: Rob Clark Acked-by: Jordan Crouse Signed-off-by: Rob Clark

Merge tag 'drm-msm-next-2020-03-22' of https://gitlab.freedesktop.org/drm/msm into drm-next

2020-03-31T06:34:55+00:00

A bit smaller this time around.. there are still a couple uabi additions for vulkan waiting in the wings, but I punted on them this cycle due to running low on time. (They should be easy enough to rebase, and if it is a problem for anyone I can push a next+uabi branch so that tu work can proceed.) The bigger change is refactoring dpu resource manager and moving dpu to use atomic global state. Other than that, it is mostly cleanups and fixes. From: Rob Clark Link: https://patchwork.freedesktop.org/patch/msgid/

drm/msm: avoid double-attaching hdmi/edp bridges

2020-03-19T19:08:52+00:00

Each of hdmi and edp are already attached in msm_*_bridge_init. A second attachment returns -EBUSY, failing the driver load. Tested with HDMI on IFC6410 (APQ8064 / MDP4), but eDP case should be analogous. Fixes: 3ef2f119bd3ed (drm/msm: Use drm_attach_bridge() to attach a bridge to an encoder) Cc: Boris Brezillon Signed-off-by: Ilia Mirkin Reviewed-by: Rob Clark Reviewed-by: Boris Brezillon Tested-by: Bjorn Andersson (hdmi part) Reviewed-by: Bjorn Andersson Signed-off-by: Rob Clark

drm/bridge: Extend bridge API to disable connector creation

2020-02-26T11:31:23+00:00

Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core). Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet. The change is based on the following semantic patch, with manual review and edits. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... } @ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> } @@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 ) Signed-off-by: Laurent Pinchart Reviewed-by: Boris Brezillon Acked-by: Sam Ravnborg Reviewed-by: Tomi Valkeinen Tested-by: Sebastian Reichel Reviewed-by: Sebastian Reichel Acked-by: Daniel Vetter Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com

Merge tag 'drm-msm-next-2020-01-14' of https://gitlab.freedesktop.org/drm/msm into drm-next

2020-01-20T04:09:43+00:00

+ sc7180 display + DSI support + a618 (sc7180) support + more UBWC (bandwidth compression) support + various cleanups to handle devices that use vs don't use zap fw, etc + usual random cleanups and fixes Signed-off-by: Dave Airlie From: Rob Clark Link: https://patchwork.freedesktop.org/patch/msgid/

drm/msm/hdmi: Remove unneeded semicolon

2020-01-03T00:14:52+00:00

Fixes coccicheck warning: drivers/gpu/drm/msm/hdmi/hdmi_connector.c:104:3-4: Unneeded semicolon Reported-by: Hulk Robot Signed-off-by: zhengbin Reviewed-by: Jordan Crouse Signed-off-by: Rob Clark

Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2019-12-17T12:57:54+00:00

drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com

Merge tag 'drm-msm-next-2019-11-05' of https://gitlab.freedesktop.org/drm/msm into drm-next

2019-12-02T00:21:12+00:00

+ OCMEM support to enable the couple generations that had shared OCMEM rather than GMEM exclusively for the GPU (late a3xx and I think basically all of a4xx). Bjorn and Brian decided to land this through the drm tree to avoid having to coordinate merge requests. + a510 support, and various associated display support + the usual misc cleanups and fixes Signed-off-by: Dave Airlie From: Rob Clark Link: https://patchwork.freedesktop.org/patch/msgid/

drm/msm/hdmi: Provide ddc symlink in hdmi connector sysfs directory

2019-11-07T14:08:23+00:00

Use the ddc pointer provided by the generic connector. Signed-off-by: Andrzej Pietrasiewicz Acked-by: Sam Ravnborg Reviewed-by: Emil Velikov Acked-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/ <1e343b02195757bfbf60ca8999cadeb376db204e.1566845537.git.andrzej.p@collabora.com

drm/msm/hdmi: silence -EPROBE_DEFER warning

2019-11-02T16:43:24+00:00

Silence a warning message due to an -EPROBE_DEFER error to help cleanup the system boot log. Signed-off-by: Brian Masney Reviewed-by: Linus Walleij Signed-off-by: Rob Clark