kernel/linux.git/drivers/gpu/drm/msm/dsi, branch v6.12.81

drm/msm/dsi: fix pclk rate calculation for bonded dsi

2026-03-25T10:08:26+00:00

[ Upstream commit e4eb11b34d6c84f398d8f08d7cb4d6c38e739dd2 ] Recently, we round up new_hdisplay once at most, for bonded dsi, we may need twice, since they are independent links, we should round up each half separately. This also aligns with the hdisplay we program later in dsi_timing_setup() Example: full_hdisplay = 1904, dsc_bpp = 8, bpc = 8 new_full_hdisplay = DIV_ROUND_UP(1904 * 8, 8 * 3) = 635 if we use half display new_half_hdisplay = DIV_ROUND_UP(952 * 8, 8 * 3) = 318 new_full_display = 636 Fixes: 7c9e4a554d4a ("drm/msm/dsi: Reduce pclk rate for compression") Signed-off-by: Pengyu Luo Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/709716/ Link: https://lore.kernel.org/r/20260306163255.215456-1-mitltlatltl@gmail.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: fix hdisplay calculation when programming dsi registers

2026-03-25T10:08:26+00:00

[ Upstream commit ac47870fd795549f03d57e0879fc730c79119f4b ] Recently, the hdisplay calculation is working for 3:1 compressed ratio only. If we have a video panel with DSC BPP = 8, and BPC = 10, we still use the default bits_per_pclk = 24, then we get the wrong hdisplay. We can draw the conclusion by cross-comparing the calculation with the calculation in dsi_adjust_pclk_for_compression(). Since CMD mode does not use this, we can remove !(msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) safely. Fixes: efcbd6f9cdeb ("drm/msm/dsi: Enable widebus for DSI") Signed-off-by: Pengyu Luo Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/704822/ Link: https://lore.kernel.org/r/20260214105145.105308-1-mitltlatltl@gmail.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi/phy_7nm: Fix missing initial VCO rate

2025-11-13T20:34:18+00:00

[ Upstream commit 5ddcb0cb9d10e6e70a68e0cb8f0b8e3a7eb8ccaf ] Driver unconditionally saves current state on first init in dsi_pll_7nm_init(), but does not save the VCO rate, only some of the divider registers. The state is then restored during probe/enable via msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() -> dsi_7nm_pll_restore_state(). Restoring calls dsi_pll_7nm_vco_set_rate() with pll_7nm->vco_current_rate=0, which basically overwrites existing rate of VCO and messes with clock hierarchy, by setting frequency to 0 to clock tree. This makes anyway little sense - VCO rate was not saved, so should not be restored. If PLL was not configured configure it to minimum rate to avoid glitches and configuring entire in clock hierarchy to 0 Hz. Reviewed-by: Dmitry Baryshkov Signed-off-by: Krzysztof Kozlowski Patchwork: https://patchwork.freedesktop.org/patch/657827/ Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-9-ee633e3ddbff@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi/phy: Toggle back buffer resync after preparing PLL

2025-11-13T20:34:18+00:00

[ Upstream commit b63f008f395ca5f6bc89123db97440bdc19981c4 ] According to Hardware Programming Guide for DSI PHY, the retime buffer resync should be done after PLL clock users (byte_clk and intf_byte_clk) are enabled. Downstream also does it as part of configuring the PLL. Driver was only turning off the resync FIFO buffer, but never bringing it on again. Reviewed-by: Dmitry Baryshkov Signed-off-by: Krzysztof Kozlowski Patchwork: https://patchwork.freedesktop.org/patch/657823/ Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-6-ee633e3ddbff@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi/dsi_phy_10nm: Fix missing initial VCO rate

2025-06-27T10:11:41+00:00

[ Upstream commit 8a48e35becb214743214f5504e726c3ec131cd6d ] Driver unconditionally saves current state on first init in dsi_pll_10nm_init(), but does not save the VCO rate, only some of the divider registers. The state is then restored during probe/enable via msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() -> dsi_10nm_pll_restore_state(). Restoring calls dsi_pll_10nm_vco_set_rate() with pll_10nm->vco_current_rate=0, which basically overwrites existing rate of VCO and messes with clock hierarchy, by setting frequency to 0 to clock tree. This makes anyway little sense - VCO rate was not saved, so should not be restored. If PLL was not configured configure it to minimum rate to avoid glitches and configuring entire in clock hierarchy to 0 Hz. Suggested-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/sz4kbwy5nwsebgf64ia7uq4ee7wbsa5uy3xmlqwcstsbntzcov@ew3dcyjdzmi2/ Signed-off-by: Krzysztof Kozlowski Fixes: a4ccc37693a2 ("drm/msm/dsi_pll_10nm: restore VCO rate during Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/654796/ Link: https://lore.kernel.org/r/20250520111325.92352-2-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: Add check for devm_kstrdup()

2025-04-25T08:47:57+00:00

commit 52b3f0e118b1700e5c60ff676a1f522ce44fadc8 upstream. Add check for the return value of devm_kstrdup() in dsi_host_parse_dt() to catch potential exception. Fixes: 958d8d99ccb3 ("drm/msm/dsi: parse vsync source from device tree") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/638297/ Link: https://lore.kernel.org/r/20250219040712.2598161-1-haoxiang_li2024@163.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Greg Kroah-Hartman

drm/msm/dsi: Set PHY usescase (and mode) before registering DSI host

2025-04-10T12:39:15+00:00

[ Upstream commit 660c396c98c061f9696bebacc178b74072e80054 ] Ordering issues here cause an uninitialized (default STANDALONE) usecase to be programmed (which appears to be a MUX) in some cases when msm_dsi_host_register() is called, leading to the slave PLL in bonded-DSI mode to source from a clock parent (dsi1vco) that is off. This should seemingly not be a problem as the actual dispcc clocks from DSI1 that are muxed in the clock tree of DSI0 are way further down, this bit still seems to have an effect on them somehow and causes the right side of the panel controlled by DSI1 to not function. In an ideal world this code is refactored to no longer have such error-prone calls "across subsystems", and instead model the "PLL src" register field as a regular mux so that changing the clock parents programmatically or in DTS via `assigned-clock-parents` has the desired effect. But for the avid reader, the clocks that we *are* muxing into DSI0's tree are way further down, so if this bit turns out to be a simple mux between dsiXvco and out_div, that shouldn't have any effect as this whole tree is off anyway. Fixes: 57bf43389337 ("drm/msm/dsi: Pass down use case to PHY") Reviewed-by: Abhinav Kumar Reviewed-by: Dmitry Baryshkov Signed-off-by: Marijn Suijten Patchwork: https://patchwork.freedesktop.org/patch/637650/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-2-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: Use existing per-interface slice count in DSC timing

2025-04-10T12:39:15+00:00

[ Upstream commit 14ad809ceb66d0874cbe4bd5ca9edf0de8d9ad96 ] When configuring the timing of DSI hosts (interfaces) in dsi_timing_setup() all values written to registers are taking bonded-mode into account by dividing the original mode width by 2 (half the data is sent over each of the two DSI hosts), but the full width instead of the interface width is passed as hdisplay parameter to dsi_update_dsc_timing(). Currently only msm_dsc_get_slices_per_intf() is called within dsi_update_dsc_timing() with the `hdisplay` argument which clearly documents that it wants the width of a single interface (which, again, in bonded DSI mode is half the total width of the mode) resulting in all subsequent values to be completely off. However, as soon as we start to pass the halved hdisplay into dsi_update_dsc_timing() we might as well discard msm_dsc_get_slices_per_intf() since the value it calculates is already available in dsc->slice_count which is per-interface by the current design of MSM DPU/DSI implementations and their use of the DRM DSC helpers. Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Reviewed-by: Dmitry Baryshkov Reviewed-by: Jessica Zhang Signed-off-by: Marijn Suijten Patchwork: https://patchwork.freedesktop.org/patch/637648/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-1-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi/phy: Program clock inverters in correct register

2025-04-10T12:39:14+00:00

[ Upstream commit baf49072877726616c7f5943a6b45eb86bfeca0a ] Since SM8250 all downstream sources program clock inverters in PLL_CLOCK_INVERTERS_1 register and leave the PLL_CLOCK_INVERTERS as reset value (0x0). The most recent Hardware Programming Guide for 3 nm, 4 nm, 5 nm and 7 nm PHYs also mention PLL_CLOCK_INVERTERS_1. Signed-off-by: Krzysztof Kozlowski Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Reviewed-by: Dmitry Baryshkov Reported-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/634489/ Link: https://lore.kernel.org/r/20250129115504.40080-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi/phy: Do not overwite PHY_CMN_CLK_CFG1 when choosing bitclk source

2025-02-27T12:30:20+00:00

[ Upstream commit 73f69c6be2a9f22c31c775ec03c6c286bfe12cfa ] PHY_CMN_CLK_CFG1 register has four fields being used in the driver: DSI clock divider, source of bitclk and two for enabling the DSI PHY PLL clocks. dsi_7nm_set_usecase() sets only the source of bitclk, so should leave all other bits untouched. Use newly introduced dsi_pll_cmn_clk_cfg1_update() to update respective bits without overwriting the rest. While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to make the code more readable and obvious. Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/637380/ Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-3-0943b850722c@linaro.org Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin