kernel/linux.git/drivers/gpu/drm/msm/dsi, branch v5.10.78

drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling

2021-10-20T09:45:06+00:00

commit c8f01ffc83923a91e8087aaa077de13354a7aa59 upstream. This disables a lock which wasn't enabled and it does not disable the first lock in the array. Fixes: 6e0eb52eba9e ("drm/msm/dsi: Parse bus clocks from a list") Signed-off-by: Dan Carpenter Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20211001123409.GG2283@kili Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman

drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()

2021-10-20T09:45:05+00:00

commit 739b4e7756d3301dd673ca517afca46a5f635562 upstream. Return an error code if msm_dsi_manager_validate_current_config(). Don't return success. Fixes: 8b03ad30e314 ("drm/msm/dsi: Use one connector for dual DSI mode") Signed-off-by: Dan Carpenter Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20211001123308.GF2283@kili Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman

drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660

2021-09-18T11:40:26+00:00

[ Upstream commit 462f7017a6918d152870bfb8852f3c70fd74b296 ] VDDA is not present and the specified load value is wrong. Fix it. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20210728222057.52641-1-konrad.dybcio@somainline.org Reviewed-by: Dmitry Baryshkov Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi: Fix some reference counted resource leaks

2021-09-15T07:50:38+00:00

[ Upstream commit 6977cc89c87506ff17e6c05f0e37f46752256e82 ] 'of_find_device_by_node()' takes a reference that must be released when not needed anymore. This is expected to be done in 'dsi_destroy()'. However, there are 2 issues in 'dsi_get_phy()'. First, if 'of_find_device_by_node()' succeeds but 'platform_get_drvdata()' returns NULL, 'msm_dsi->phy_dev' will still be NULL, and the reference won't be released in 'dsi_destroy()'. Secondly, as 'of_find_device_by_node()' already takes a reference, there is no need for an additional 'get_device()'. Move the assignment to 'msm_dsi->phy_dev' a few lines above and remove the unneeded 'get_device()' to solve both issues. Fixes: ec31abf6684e ("drm/msm/dsi: Separate PHY to another platform device") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/f15bc57648a00e7c99f943903468a04639d50596.1628241097.git.christophe.jaillet@wanadoo.fr Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi_pll_7nm: Fix variable usage for pll_lockdet_rate

2021-04-10T11:36:08+00:00

[ Upstream commit 9daaf31307856defb1070685418ce5a484ecda3a ] The PLL_LOCKDET_RATE_1 was being programmed with a hardcoded value directly, but the same value was also being specified in the dsi_pll_regs struct pll_lockdet_rate variable: let's use it! Based on 362cadf34b9f ("drm/msm/dsi_pll_10nm: Fix variable usage for pll_lockdet_rate") Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi: fix check-before-set in the 7nm dsi_pll code

2021-03-30T12:32:01+00:00

[ Upstream commit 3b24cdfc721a5f1098da22f9f68ff5f4a5efccc9 ] Fix setting min/max DSI PLL rate for the V4.1 7nm DSI PLL (used on sm8250). Current code checks for pll->type before it is set (as it is set in the msm_dsi_pll_init() after calling device-specific functions. Cc: Jonathan Marek Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi: Correct io_start for MSM8994 (20nm PHY)

2021-03-04T10:38:12+00:00

[ Upstream commit 33a7808ce1aea6e2edc1af25db25928137940c02 ] The previous registers were *almost* correct, but instead of PHYs, they were pointing at DSI PLLs, resulting in the PHY id autodetection failing miserably. Fixes: dcefc117cc19 ("drm/msm/dsi: Add support for msm8x94") Signed-off-by: Konrad Dybcio Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi_pll_10nm: restore VCO rate during restore_state

2020-12-30T10:53:01+00:00

[ Upstream commit a4ccc37693a271330a46208afbeaed939d54fdbb ] PHY disable/enable resets PLL registers to default values. Thus in addition to restoring several registers we also need to restore VCO rate settings. Signed-off-by: Dmitry Baryshkov Fixes: c6659785dfb3 ("drm/msm/dsi/pll: call vco set rate explicitly") Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi_pll_7nm: restore VCO rate during restore_state

2020-12-30T10:53:01+00:00

[ Upstream commit 5047ab95bb7db0e7b2ecfd5e9bcafc7fd822c652 ] PHY disable/enable resets PLL registers to default values. Thus in addition to restoring several registers we also need to restore VCO rate settings. Signed-off-by: Dmitry Baryshkov Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: fix 32b build warns

2020-09-29T00:20:51+00:00

Neither of these code-paths apply to older 32b devices, but it is rude to introduce warnings. Signed-off-by: Rob Clark Reviewed-by: Dave Airlie Signed-off-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20200929001925.2916984-1-robdclark@gmail.com