kernel/linux.git/drivers/gpu/drm/msm/dsi/phy, branch linux-7.0.y

drm/msm: add missing MODULE_DEVICE_ID definitions

2026-05-23T11:08:47+00:00

[ Upstream commit b21e85400ce763f2c6ad913e03fea5cadc323c13 ] The drm/msm module bundles several drivers, each of them having a separate OF match table, however only MDSS (subsystem), KMS devices and GPU have corresponding MODULE_DEVICE_ID tables. Add MODULE_DEVICE_ID to the display-related driver and to all other drivers in this module, simplifying userspace job. Fixes: 060530f1ea67 ("drm/msm: use componentised device support") Reported-by: Loïc Minier Patchwork: https://patchwork.freedesktop.org/patch/707960/ Link: https://lore.kernel.org/r/20260228-msm-device-id-v2-1-24b085919444@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi/phy: fix hardware revision

2026-03-05T23:53:03+00:00

The hardware revision for TSMC 3nm-based Qualcomm SOCs should be 7.2, this can be confirmed from REG_DSI_7nm_PHY_CMN_REVISION_ID0, the value is 0x27, which means hardware revision is 7.2 No functional change. Fixes: 1337d7ebfb6d ("drm/msm/dsi/phy: Add support for SM8750") Suggested-by: Dmitry Baryshkov Signed-off-by: Pengyu Luo Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/707414/ Link: https://lore.kernel.org/r/20260226122958.22555-2-mitltlatltl@gmail.com Signed-off-by: Dmitry Baryshkov

drm/msm/dsi/phy: Add support for Kaanapali

2026-01-21T00:03:57+00:00

Add DSI PHY support for the Kaanapali platform, Kaanapali introduce addition of DSI2/DSI2_phy compared to SM8650. However, based on the HPG diagram, only DSI0_phy and DSI1_phy works. Co-developed-by: Yongxing Mou Signed-off-by: Yongxing Mou Reviewed-by: Dmitry Baryshkov Signed-off-by: Yuanjie Yang Patchwork: https://patchwork.freedesktop.org/patch/698705/ Link: https://lore.kernel.org/r/20260115092749.533-7-yuanjie.yang@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov

drm/msm/dsi_phy_14nm: convert from divider_round_rate() to divider_determine_rate()

2026-01-13T07:08:30+00:00

The divider_round_rate() function is now deprecated, so let's migrate to divider_determine_rate() instead so that this deprecated API can be removed. Note that when the main function itself was migrated to use determine_rate, this was mistakenly converted to: req->rate = divider_round_rate(...) This is invalid in the case when an error occurs since it can set the rate to a negative value. Fixes: cc41f29a6b04 ("drm/msm/dsi_phy_14nm: convert from round_rate() to determine_rate()") Signed-off-by: Brian Masney Reviewed-by: Konrad Dybcio Reviewed-by: Abel Vesa Patchwork: https://patchwork.freedesktop.org/patch/697613/ Link: https://lore.kernel.org/r/20260108-clk-divider-round-rate-v1-24-535a3ed73bf3@redhat.com Signed-off-by: Dmitry Baryshkov

drm/msm: dsi: fix PLL init in bonded mode

2025-10-28T22:10:06+00:00

When in bonded DSI mode, only one PLL in one DSI PHY is used for both DSI PHYs, meaning that parents of the secondary DSI PHY will use the primary DSI PHY PLL as parent. In this case the primary DSI PHY PLL will be set even if the primary DSI PHY is not yet enabled. The DSI PHY code has support for this particular use-case and will handle the fact the PLL was already set when initializing the primary DSI PHY. By introducing a protected variable pll_enable_cnt in the commit cb55f39bf7b1 ("drm/msm/dsi/phy: Fix reading zero as PLL rates when unprepared"), this variable is only initially set to 1 when the DSI PHY is initialized making it impossible to set the PLL before, breaking the bonded DSI use case by returning 0 when setting the PLL from the secondary DSI PHY driver and skipping the correct clocks initialization. But since it was already possible to set the PLL without enabling the DSI PHY, just drop the pll_enable_cnt setting from the PHY enable/disable and simply increment/decrement the pll_enable_cnt variable from the dsi_pll_enable/disable_pll_bias to make sure any PLL operation is done with the PLL BIAS enabled. Fixes: cb55f39bf7b1 ("drm/msm/dsi/phy: Fix reading zero as PLL rates when unprepared") Closes: https://lore.kernel.org/all/50a49d72-2b1e-471d-b0c4-d5a0b38b2a21@linaro.org/ Tested-by: Krzysztof Kozlowski Signed-off-by: Neil Armstrong Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/683688/ Link: https://lore.kernel.org/r/20251027-topic-sm8x50-fix-dsi-bonded-v1-1-a477cd3f907d@linaro.org Signed-off-by: Dmitry Baryshkov

drm/msm/dsi/phy: Fix reading zero as PLL rates when unprepared

2025-09-09T14:24:25+00:00

Hardware Programming Guide for DSI PHY says that PLL_SHUTDOWNB and DIGTOP_PWRDN_B have to be asserted for any PLL register access. Whenever dsi_pll_7nm_vco_recalc_rate() or dsi_pll_7nm_vco_set_rate() were called on unprepared PLL, driver read values of zero leading to all sort of further troubles, like failing to set pixel and byte clock rates. Asserting the PLL shutdown bit is done by dsi_pll_enable_pll_bias() (and corresponding dsi_pll_disable_pll_bias()) which are called through the code, including from PLL .prepare() and .unprepare() callbacks. The .set_rate() and .recalc_rate() can be called almost anytime from external users including times when PLL is or is not prepared, thus driver should not interfere with the prepare status. Implement simple reference counting for the PLL bias, so set_rate/recalc_rate will not change the status of prepared PLL. Issue of reading 0 in .recalc_rate() did not show up on existing devices, but only after re-ordering the code for SM8750. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/673416/ Link: https://lore.kernel.org/r/20250908094950.72877-2-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov

drm/msm/dsi/phy_7nm: Fix missing initial VCO rate

2025-09-02T14:00:57+00:00

Driver unconditionally saves current state on first init in dsi_pll_7nm_init(), but does not save the VCO rate, only some of the divider registers. The state is then restored during probe/enable via msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() -> dsi_7nm_pll_restore_state(). Restoring calls dsi_pll_7nm_vco_set_rate() with pll_7nm->vco_current_rate=0, which basically overwrites existing rate of VCO and messes with clock hierarchy, by setting frequency to 0 to clock tree. This makes anyway little sense - VCO rate was not saved, so should not be restored. If PLL was not configured configure it to minimum rate to avoid glitches and configuring entire in clock hierarchy to 0 Hz. Reviewed-by: Dmitry Baryshkov Signed-off-by: Krzysztof Kozlowski Patchwork: https://patchwork.freedesktop.org/patch/657827/ Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-9-ee633e3ddbff@linaro.org Signed-off-by: Dmitry Baryshkov

drm/msm/dsi/phy: Define PHY_CMN_CTRL_0 bitfields

2025-09-02T14:00:57+00:00

Add bitfields for PHY_CMN_CTRL_0 registers to avoid hard-coding bit masks and shifts and make the code a bit more readable. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/657818/ Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-7-ee633e3ddbff@linaro.org Signed-off-by: Dmitry Baryshkov

drm/msm/dsi/phy: Toggle back buffer resync after preparing PLL

2025-09-02T14:00:57+00:00

According to Hardware Programming Guide for DSI PHY, the retime buffer resync should be done after PLL clock users (byte_clk and intf_byte_clk) are enabled. Downstream also does it as part of configuring the PLL. Driver was only turning off the resync FIFO buffer, but never bringing it on again. Reviewed-by: Dmitry Baryshkov Signed-off-by: Krzysztof Kozlowski Patchwork: https://patchwork.freedesktop.org/patch/657823/ Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-6-ee633e3ddbff@linaro.org Signed-off-by: Dmitry Baryshkov

drm/msm/dsi_phy_7nm: convert from round_rate() to determine_rate()

2025-08-28T22:51:46+00:00

The round_rate() clk ops is deprecated, so migrate this driver from round_rate() to determine_rate() using the Coccinelle semantic patch on the cover letter of this series. The change to use clamp_t() was done manually. Signed-off-by: Brian Masney Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/667874/ Link: https://lore.kernel.org/r/20250810-drm-msm-phy-clk-round-rate-v2-5-0fd1f7979c83@redhat.com Signed-off-by: Dmitry Baryshkov