kernel/linux.git/drivers/gpu/drm/msm/dp, branch v5.10.78

drm/msm/dp: return correct edid checksum after corrupted edid checksum read

2021-09-18T11:40:27+00:00

[ Upstream commit 7948fe12d47a946fb8025a0534c900e3dd4b5839 ] Response with correct edid checksum saved at connector after corrupted edid checksum read. This fixes Link Layer CTS cases 4.2.2.3, 4.2.2.6. Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1628196295-7382-6-git-send-email-khsieh@codeaurora.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: Initialize the INTF_CONFIG register

2021-08-04T10:46:43+00:00

[ Upstream commit f9a39932fa54b6421e751ada7a285da809146421 ] Some bootloaders set the widebus enable bit in the INTF_CONFIG register, but configuration of widebus isn't yet supported ensure that the register has a known value, with widebus disabled. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Bjorn Andersson Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20210722024434.3313167-1-bjorn.andersson@linaro.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: initialize audio_comp when audio starts

2021-05-19T08:13:12+00:00

[ Upstream commit f2f46b878777e0d3f885c7ddad48f477b4dea247 ] Initialize audio_comp when audio starts and wait for audio_comp at dp_display_disable(). This will take care of both dongle unplugged and display off (suspend) cases. Changes in v2: -- add dp_display_signal_audio_start() Changes in v3: -- restore dp_display_handle_plugged_change() at dp_hpd_unplug_handle(). Changes in v4: -- none Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Tested-by: Stephen Boyd Fixes: c703d5789590 ("drm/msm/dp: trigger unplug event in msm_dp_display_disable") Link: https://lore.kernel.org/r/1619048258-8717-3-git-send-email-khsieh@codeaurora.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: Fix incorrect NULL check kbot warnings in DP driver

2021-05-11T12:47:28+00:00

[ Upstream commit 7d649cfe0314aad2ba18042885ab9de2f13ad809 ] Fix an incorrect NULL check reported by kbot in the MSM DP driver smatch warnings: drivers/gpu/drm/msm/dp/dp_hpd.c:37 dp_hpd_connect() error: we previously assumed 'hpd_priv->dp_cb' could be null (see line 37) Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Abhinav Kumar Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1614971839-2686-2-git-send-email-abhinavk@codeaurora.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: trigger unplug event in msm_dp_display_disable

2021-03-04T10:38:13+00:00

[ Upstream commit c703d5789590935c573bbd080a2166b72d51a017 ] 1. Trigger the unplug event in msm_dp_display_disable() to shutdown audio properly. 2. Reset the completion before signal the disconnect event. Fixes: 158b9aa74479 ("drm/msm/dp: wait for audio notification before disabling clocks") Reviewed-by: Stephen Boyd Tested-by: Stephen Boyd Signed-off-by: Judy Hsiao Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: do not notify audio subsystem if sink doesn't support audio

2020-12-30T10:53:07+00:00

[ Upstream commit e8c765811b1064c200829eacf237ac8c25e79cd0 ] For sinks that do not support audio, there is no need to notify audio subsystem of the connection event. This will make sure that audio routes only to the primary display when connected to such sinks. changes in v2: - Added fixes tag - Removed nested if condition and removed usage of global pointer Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM") Signed-off-by: Abhinav Kumar Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: skip checking LINK_STATUS_UPDATED bit

2020-12-30T10:53:07+00:00

[ Upstream commit ea530388e64bd584645f2d89e40ca7dffade8eff ] Some dongle will not clear LINK_STATUS_UPDATED bit after DPCD read which cause link training failed. This patch just read 6 bytes of DPCD link status from sink and return without checking LINK_STATUS_UPDATED bit. Only 8 bits are used to represent link rate at sinker DPCD. The really link rate is 2.7Mb times the 8 bits value. For example, 0x0A at DPCD is equal to 2.7Gb (10 * 2.7Mb). This patch also convert 8 bits value of DPCD to really link rate to fix worng link rate error during phy compliance test. Fixes: 6625e2637d93 ("drm/msm/dp: DisplayPort PHY compliance tests fixup") Signed-off-by: Kuogee Hsieh Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: return correct connection status after suspend

2020-12-30T10:53:07+00:00

[ Upstream commit 19e52bcb27c2ba140699d2230d722366d7d048a1 ] During suspend, dp host controller and hpd block are disabled due to both ahb and aux clock are disabled. Therefore hpd plug/unplug interrupts will not be generated. At dp_pm_resume(), reinitialize both dp host controller and hpd block so that hpd plug/unplug interrupts will be generated and handled by driver so that hpd connection state is updated correctly. This patch will fix link training flaky issues. Changes in v2: -- use container_of to cast correct dp_display_private pointer at both dp_pm_suspend() and dp_pm_resume(). Changes in v3: -- replace hpd_state atomic_t with u32 Changes in v4 -- call dp_display_host_deinit() at dp_pm_suspend() -- call dp_display_host_init() at msm_dp_display_enable() -- fix phy->init_count unbalance which causes link training failed Changes in v5 -- add Fixes tag Fixes: 8ede2ecc3e5e (drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets) Tested-by: Stephen Boyd Signed-off-by: Kuogee Hsieh Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: DisplayPort PHY compliance tests fixup

2020-12-30T10:53:01+00:00

[ Upstream commit 6625e2637d93d2f52ef0d17656f21bfa2cb4983a ] Bandwidth code was being used as test link rate. Fix this by converting bandwidth code to test link rate Do not reset voltage and pre-emphasis level during IRQ HPD attention interrupt. Also fix pre-emphasis parsing during test link status process Signed-off-by: Tanmay Shah Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Reviewed-by: Stephen Boyd Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: fix incorrect function prototype of dp_debug_get()

2020-09-26T03:31:06+00:00

Fix the incorrect function prototype for dp_debug_get() in the dp_debug module to address compilation warning. Also add prototype for msm_dp_debugfs_init() for fixing compilation issue with other defconfigs. changes in v2: - add prototype for msm_dp_debugfs_init() Fixes: f913454aae8e ("drm/msm/dp: move debugfs node to /sys/kernel/debug/dri/*/") Reported-by: kernel test robot Signed-off-by: Abhinav Kumar Signed-off-by: Rob Clark