kernel/linux.git/drivers/gpu/drm/msm/dp, branch v5.10.258

drm/msm/dp: reset the link phy params before link training

2024-09-04T11:17:42+00:00

[ Upstream commit 319aca883bfa1b85ee08411541b51b9a934ac858 ] Before re-starting link training reset the link phy params namely the pre-emphasis and voltage swing levels otherwise the next link training begins at the previously cached levels which can result in link training failures. Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Reviewed-by: Dmitry Baryshkov Tested-by: Dmitry Baryshkov # SM8350-HDK Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/605946/ Link: https://lore.kernel.org/r/20240725220450.131245-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dp: return correct Colorimetry for DP_TEST_DYNAMIC_RANGE_CEA case

2024-02-23T07:42:19+00:00

[ Upstream commit fcccdafd91f8bdde568b86ff70848cf83f029add ] MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field. dp_link_get_colorimetry_config() returns wrong colorimetry value in the DP_TEST_DYNAMIC_RANGE_CEA case in the current implementation. Hence fix this problem by having dp_link_get_colorimetry_config() return defined CEA RGB colorimetry value in the case of DP_TEST_DYNAMIC_RANGE_CEA. Changes in V2: -- drop retrieving colorimetry from colorspace -- drop dr = link->dp_link.test_video.test_dyn_range assignment Changes in V3: -- move defined MISCr0a Colorimetry vale to dp_reg.h -- rewording commit title -- rewording commit text to more precise describe this patch Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/574888/ Link: https://lore.kernel.org/r/1705526010-597-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dp: skip validity check for DP CTS EDID checksum

2023-11-28T16:54:50+00:00

[ Upstream commit a251c9d8e30833b260101edb9383b176ee2b7cb1 ] The DP CTS test for EDID last block checksum expects the checksum for the last block, invalid or not. Skip the validity check. For the most part (*), the EDIDs returned by drm_get_edid() will be valid anyway, and there's the CTS workaround to get the checksum for completely invalid EDIDs. See commit 7948fe12d47a ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read"). This lets us remove one user of drm_edid_block_valid() with hopes the function can be removed altogether in the future. (*) drm_get_edid() ignores checksum errors on CTA extensions. Cc: Abhinav Kumar Cc: Dmitry Baryshkov Cc: Kuogee Hsieh Cc: Marijn Suijten Cc: Rob Clark Cc: Sean Paul Cc: Stephen Boyd Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Jani Nikula Reviewed-by: Stephen Boyd Reviewed-by: Abhinav Kumar Reviewed-by: Kuogee Hsieh Patchwork: https://patchwork.freedesktop.org/patch/555361/ Link: https://lore.kernel.org/r/20230901142034.580802-1-jani.nikula@intel.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: do not reinitialize phy unless retry during link training

2023-10-25T09:54:13+00:00

[ Upstream commit 0c1a2e69bcb506f48ebf94bd199bab0b93f66da2 ] DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will cause PLL unlocked initially and then PLL gets locked at the end of initialization. PLL_UNLOCKED interrupt will fire during this time if the interrupt mask is enabled. However currently DP driver link training implementation incorrectly re-initializes PHY unconditionally during link training as the PHY was already configured in dp_ctrl_enable_mainlink_clocks(). Fix this by re-initializing the PHY only if the previous link training failed. [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30 Signed-off-by: Kuogee Hsieh Tested-by: Abhinav Kumar # sc7280 Reviewed-by: Abhinav Kumar Reviewed-by: Stephen Boyd Reviewed-by: Dmitry Baryshkov Tested-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/551847/ Link: https://lore.kernel.org/r/1691533190-19335-1-git-send-email-quic_khsieh@quicinc.com [quic_abhinavk@quicinc.com: added line break in commit text] Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dp: Free resources after unregistering them

2023-07-27T06:43:54+00:00

[ Upstream commit fa0048a4b1fa7a50c8b0e514f5b428abdf69a6f8 ] The DP component's unbind operation walks through the submodules to unregister and clean things up. But if the unbind happens because the DP controller itself is being removed, all the memory for those submodules has just been freed. Change the order of these operations to avoid the many use-after-free that otherwise happens in this code path. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Bjorn Andersson Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/542166/ Link: https://lore.kernel.org/r/20230612220259.1884381-1-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: unregister audio driver during unbind

2023-05-30T11:57:51+00:00

[ Upstream commit 85c636284cb63b7740b4ae98881ace92158068d3 ] while binding the code always registers a audio driver, however there is no corresponding unregistration done in unbind. This leads to multiple redundant audio platform devices if dp_display_bind and dp_display_unbind happens multiple times during startup. On X13s platform this resulted in 6 to 9 audio codec device instead of just 3 codec devices for 3 dp ports. Fix this by unregistering codecs on unbind. Signed-off-by: Srinivas Kandagatla Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM") Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/533324/ Link: https://lore.kernel.org/r/20230421145657.12186-1-srinivas.kandagatla@linaro.org Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer

2023-01-18T10:44:54+00:00

commit 1cba0d150fa102439114a91b3e215909efc9f169 upstream. There are 3 possible interrupt sources are handled by DP controller, HPDstatus, Controller state changes and Aux read/write transaction. At every irq, DP controller have to check isr status of every interrupt sources and service the interrupt if its isr status bits shows interrupts are pending. There is potential race condition may happen at current aux isr handler implementation since it is always complete dp_aux_cmd_fifo_tx() even irq is not for aux read or write transaction. This may cause aux read transaction return premature if host aux data read is in the middle of waiting for sink to complete transferring data to host while irq happen. This will cause host's receiving buffer contains unexpected data. This patch fixes this problem by checking aux isr and return immediately at aux isr handler if there are no any isr status bits set. Current there is a bug report regrading eDP edid corruption happen during system booting up. After lengthy debugging to found that VIDEO_READY interrupt was continuously firing during system booting up which cause dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data from aux hardware buffer which is not yet contains complete data transfer from sink. This cause edid corruption. Follows are the signature at kernel logs when problem happen, EDID has corrupt header panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID Changes in v2: -- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr() -- add more commit text Changes in v3: -- add Stephen suggested -- dp_aux_isr() return IRQ_XXX back to caller -- dp_ctrl_isr() return IRQ_XXX back to caller Changes in v4: -- split into two patches Changes in v5: -- delete empty line between tags Changes in v6: -- remove extra "that" and fixed line more than 75 char at commit text Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh Tested-by: Douglas Anderson Reviewed-by: Abhinav Kumar Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/516121/ Link: https://lore.kernel.org/r/1672193785-11003-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar Signed-off-by: Greg Kroah-Hartman

drm/msm: Use drm_mode_copy()

2023-01-14T09:16:17+00:00

[ Upstream commit b2a1c5ca50db22b3677676dd5bad5f6092429acf ] struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Rob Clark Cc: Sean Paul Cc: Abhinav Kumar Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Reviewed-by: Daniel Vetter Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-5-ville.syrjala@linux.intel.com Signed-off-by: Sasha Levin

drm/msm/dp: fix IRQ lifetime

2022-11-03T14:57:50+00:00

commit a79343dcaba4b11adb57350e0b6426906a9b658e upstream. Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This is specifically true for the DP IRQ, which will otherwise remain requested so that the next bind attempt fails when requesting the IRQ a second time. Since commit c3bf8e21b38a ("drm/msm/dp: Add eDP support via aux_bus") this can happen when the aux-bus panel driver has not yet been loaded so that probe is deferred. Fix this by tying the device-managed lifetime of the DP IRQ to the DRM device so that it is released when bind fails. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Cc: stable@vger.kernel.org # 5.10 Reviewed-by: Dmitry Baryshkov Signed-off-by: Johan Hovold Tested-by: Kuogee Hsieh Reviewed-by: Kuogee Hsieh Patchwork: https://patchwork.freedesktop.org/patch/502679/ Link: https://lore.kernel.org/r/20220913085320.8577-6-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar Signed-off-by: Greg Kroah-Hartman

drm/msm/dp: correct 1.62G link rate at dp_catalog_ctrl_config_msa()

2022-10-26T11:25:26+00:00

[ Upstream commit aa0bff10af1c4b92e6b56e3e1b7f81c660d3ba78 ] At current implementation there is an extra 0 at 1.62G link rate which cause no correct pixel_div selected for 1.62G link rate to calculate mvid and nvid. This patch delete the extra 0 to have mvid and nvid be calculated correctly. Changes in v2: -- fix Fixes tag's text Changes in v3: -- fix misspelling of "Reviewed-by" Fixes: 937f941ca06f ("drm/msm/dp: Use qmp phy for DP PLL and PHY") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/499328/ Link: https://lore.kernel.org/r/1661372150-3764-1-git-send-email-quic_khsieh@quicinc.com [DB: rewrapped commit message] Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark Signed-off-by: Sasha Levin