kernel/linux.git/drivers/gpu/drm/msm/dp/dp_ctrl.c, branch v5.19

Merge tag 'drm-msm-fixes-2022-06-20' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

2022-06-24T00:11:27+00:00

Fixes for v5.19-rc4 - Workaround for parade DSI bridge power sequencing - Fix for multi-planar YUV format offsets - Limiting WB modes to max sspp linewidth - Fixing the supported rotations to add 180 back for IGT - Fix to handle pm_runtime_get_sync() errors to avoid unclocked access in the bind() path for dpu driver - Fix the irq_free() without request issue which was a being hit frequently in CI. - Fix to add minimum ICC vote in the msm_mdss pm_resume path to address bootup splats - Fix to avoid dereferencing without checking in WB encoder - Fix to avoid crash during suspend in DP driver by ensuring interrupt mask bits are updated - Remove unused code from dpu_encoder_virt_atomic_check() - Fix to remove redundant init of dsc variable - Fix to ensure mmap offset is initialized to avoid memory corruption from unpin/evict - Fix double runpm disable in probe-defer path - VMA fenced-unpin fixes - Fix for WB max-width - Fix for rare dp resolution change issue Signed-off-by: Dave Airlie From: Rob Clark Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvdsOF1-+WfTWyEyu33XPcvxOCU00G-dz7EF2J+fdyUHg@mail.gmail.com

drm/msm/dp: force link training for display resolution change

2022-06-18T16:14:06+00:00

Display resolution change is implemented through drm modeset. Older modeset (resolution) has to be disabled first before newer modeset (resolution) can be enabled. Display disable will turn off both pixel clock and main link clock so that main link have to be re-trained during display enable to have new video stream flow again. At current implementation, display enable function manually kicks up irq_hpd_handle which will read panel link status and start link training if link status is not in sync state. However, there is rare case that a particular panel links status keep staying in sync for some period of time after main link had been shut down previously at display disabled. In this case, main link retraining will not be executed by irq_hdp_handle(). Hence video stream of newer display resolution will fail to be transmitted to panel due to main link is not in sync between host and panel. This patch will bypass irq_hpd_handle() in favor of directly call dp_ctrl_on_stream() to always perform link training in regardless of main link status. So that no unexpected exception resolution change failure cases will happen. Also this implementation are more efficient than manual kicking off irq_hpd_handle function. Changes in v2: -- set force_link_train flag on DP only (is_edp == false) Changes in v3: -- revise commit text -- add Fixes tag Changes in v4: -- revise commit text Changes in v5: -- fix spelling at commit text Changes in v6: -- split dp_ctrl_on_stream() for phy test case -- revise commit text for modeset Changes in v7: -- drop 0 assignment at local variable (ret = 0) Changes in v8: -- add patch to remove pixel_rate from dp_ctrl Changes in v9: -- forward declare dp_ctrl_on_stream_phy_test_report() Fixes: 62671d2ef24b ("drm/msm/dp: fixes wrong connection state caused by failure of link train") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/489895/ Link: https://lore.kernel.org/r/1655411200-7255-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Rob Clark

Merge tag 'msm-next-5.19-fixes-06-01' of https://gitlab.freedesktop.org/abhinavk/msm into drm-next

2022-06-03T01:35:23+00:00

5.19 fixes for msm-next - Fix to add minimum ICC vote in the msm_mdss pm_resume path to address bootup splats - Fix to avoid dereferencing without checking in WB encoder - Fix to avoid crash during suspend in DP driver by ensuring interrupt mask bits are updated - Remove unused code from dpu_encoder_virt_atomic_check() - Fix to remove redundant init of dsc variable Signed-off-by: Dave Airlie From: Abhinav Kumar Link: https://patchwork.freedesktop.org/patch/msgid/927b201e-a734-a29d-b9fb-b9889e1f7795@quicinc.com

drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl()

2022-06-01T23:15:05+00:00

dp_catalog_ctrl_reset() will software reset DP controller. But it will not reset programmable registers to default value. DP driver still have to clear mask bits to interrupt status registers to disable interrupts after software reset of controller. At current implementation, dp_ctrl_reset_irq_ctrl() will software reset dp controller but did not call dp_catalog_ctrl_enable_irq(false) to clear hpd related interrupt mask bits to disable hpd related interrupts due to it mistakenly think hpd related interrupt mask bits will be cleared by software reset of dp controller automatically. This mistake may cause system to crash during suspending procedure due to unexpected irq fired and trigger event thread to access dp controller registers with controller clocks are disabled. This patch fixes system crash during suspending problem by removing "enable" flag condition checking at dp_ctrl_reset_irq_ctrl() so that hpd related interrupt mask bits are cleared to prevent unexpected from happening. Changes in v2: -- add more details commit text Changes in v3: -- add synchrons_irq() -- add atomic_t suspended Changes in v4: -- correct Fixes's commit ID -- remove synchrons_irq() Changes in v5: -- revise commit text Changes in v6: -- add event_lock to protect "suspended" Changes in v7: -- delete "suspended" flag Fixes: 989ebe7bc446 ("drm/msm/dp: do not initialize phy until plugin interrupt received") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/486591/ Link: https://lore.kernel.org/r/1652804494-19650-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar

Merge tag 'drm-msm-next-2022-05-09' of https://gitlab.freedesktop.org/drm/msm into drm-next

2022-05-11T02:40:47+00:00

- Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - Devfreq clamp_to_idle fix - DPU: DSC (Display Stream Compression) support - DPU: inline rotation support on SC7280 - DPU: update DP timings to follow vendor recommendations - DP, DPU: add support for wide bus (on newer chipsets) - DP: eDP support - Merge DPU1 and MDP5 MDSS driver, make dpu/mdp device the master component - MDSS: optionally reset the IP block at the bootup to drop bootloader state - Properly register and unregister internal bridges in the DRM framework - Complete DPU IRQ cleanup - DP: conversion to use drm_bridge and drm_bridge_connector - eDP: drop old eDP parts again - DPU: writeback support - Misc small fixes Signed-off-by: Dave Airlie From: Rob Clark Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvJCr_1D8d0dgmyQC5HD4gmXeZw=bFV_CNCfceZbpMxRw@mail.gmail.com

drm/msm/dp: do not stop transmitting phy test pattern during DP phy compliance test

2022-05-01T23:39:34+00:00

At normal operation, transmit phy test pattern has to be terminated before DP controller switch to video ready state. However during phy compliance testing, transmit phy test pattern should not be terminated until end of compliance test which usually indicated by unplugged interrupt. Only stop sending the train pattern in dp_ctrl_on_stream() if we're not doing compliance testing. We also no longer reset 'p_level' and 'v_level' within dp_ctrl_on_link() due to both 'p_level' and 'v_level' are acquired from link status at previous dpcd read and we like to use those level to start link training. Changes in v2: -- add more details commit text -- correct Fixes Changes in v3: -- drop unnecessary braces Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/483564/ Link: https://lore.kernel.org/r/1650995939-28467-3-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov

drm/msm/dp: reset DP controller before transmit phy test pattern

2022-05-01T23:39:34+00:00

DP controller state can not switch from video ready state to transmit phy pattern state at run time. DP mainlink has to be teared down followed by reset controller to default state to have DP controller switch to transmit phy test pattern state and start generate specified phy test pattern to sinker once main link setup again. Changes in v2: -- correct Fixes's commit id Fixes: 52352fe2f866 ("drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/483563/ Link: https://lore.kernel.org/r/1650995939-28467-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov

drm/msm/dp: tear down main link at unplug handle immediately

2022-05-01T23:13:01+00:00

Two stages are required to setup up main link to be ready to transmit video stream. Stage 1: dp_hpd_plug_handle() perform link training to set up main link stage 2: user space framework (msm_dp_display_enable()) to enable pixel clock and transfer main link to video ready state. At current implementation, when dongle unplugged dp_hdp_unplug_handle() has to wait until stage 2 completed before it can send link down uevent to user space framework to disable pixel clock followed by tearing down main link. This introduce unnecessary latency if dongle unplugged happen after stage 1 and before stage 2. It also has possibility leave main link stay at ready state after dongle unplugged if framework does not response to link down uevent notification. This will prevent next dongle plug in from working. This scenario could possibly happen when dongle unplug while system in the middle of suspending. This patch allow unplug handle to tear down main link and notify framework link down immediately if dongle unplugged happen after stage 1 and before stage 2. With this approach, dp driver is much more resilient to any different scenarios. Also redundant both dp_connect_pending_timeout() and dp_disconnect_pending_timeout() are removed to reduce logic complexity. Changes in V2: -- return -EINVAL at msm_dp_display_enable() if not in correct state -- replace ST_CONNECT_PENDING with ST_MAINLINK_READY Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/483391/ Link: https://lore.kernel.org/r/1650927382-22461-1-git-send-email-quic_khsieh@quicinc.com [DB: fixed return values due to conversion to function merge] Signed-off-by: Dmitry Baryshkov

drm/msm/dp: replace DRM_DEBUG_DP marco with drm_dbg_dp

2022-05-01T23:13:01+00:00

Since DRM_DEBUG_DP is deprecated in favor of drm_dbg_dp(NULL, ...), this patch replace all DRM_DEBUG_DP with drm_dbg_dp(). Changes in v4: -- replace (strucr drm_dev *)NULL with drm_dev Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/474870/ Link: https://lore.kernel.org/r/1645122930-23863-4-git-send-email-quic_khsieh@quicinc.com [DB: fixed compilation of dp_bridge_detect() caused by previous patch] Signed-off-by: Dmitry Baryshkov

drm/msm/dp: enable widebus feature for display port

2022-04-25T21:50:47+00:00

Widebus feature will transmit two pixel data per pixel clock to interface. This feature now is required to be enabled to easy migrant to higher resolution applications in future. However since some legacy chipsets does not support this feature, this feature is enabled by setting wide_bus_en flag to true within msm_dp_desc struct. changes in v2: -- remove compression related code from timing -- remove op_info from struct msm_drm_private -- remove unnecessary wide_bus_en variables -- pass wide_bus_en into timing configuration by struct msm_dp Changes in v3: -- split patch into 3 patches -- enable widebus feature base on chip hardware revision Changes in v5: -- DP_INTF_CONFIG_DATABUS_WIDEN Changes in v6: -- static inline bool msm_dp_wide_bus_enable() in msm_drv.h Changes in v7: -- add Tested-by Changes in v9: -- add wide_bus_en to msm_dp_desc Changes in v10: -- add wide_bus_en boolean to dp_catalog struc to avoid passing it as parameter Changes in v11: -- add const to dp_catalog_hw_revision() -- add const to msm_dp_wide_bus_available() Changes in v12: -- dp_catalog_hw_revision(const struct dp_catalog *dp_catalog) -- msm_dp_wide_bus_available(const struct msm_dp *dp_display) Signed-off-by: Kuogee Hsieh Reported-by: kernel test robot Tested-by: Bjorn Andersson Reviewed-by: Stephen Boyd Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/476283/ Link: https://lore.kernel.org/r/1645824192-29670-5-git-send-email-quic_khsieh@quicinc.com [DB: fixed the compilation] Signed-off-by: Dmitry Baryshkov