kernel/linux.git/drivers/gpu/drm/mgag200, branch v4.11.6

drm: Rely on mode_config data for fb_helper initialization

2017-02-02T18:12:00+00:00

Instead of receiving the num_crts as a parameter, we can read it directly from the mode_config structure. I audited the drivers that invoke this helper and I believe all of them initialize the mode_config struct accordingly, prior to calling the fb_helper. I used the following coccinelle hack to make this transformation, except for the function headers and comment updates. The first and second rules are split because I couldn't find a way to remove the unused temporary variables at the same time I removed the parameter. // @r@ expression A,B,D,E; identifier C; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ expression A,B,C,D,E; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ identifier r.C; type T; expression V; @@ - T C; <... when != C - C = V; ...> // Changes since v1: - Rebased on top of the tip of drm-misc-next. - Remove mention to sti since a proper fix got merged. Suggested-by: Daniel Vetter Signed-off-by: Gabriel Krisman Bertazi Reviewed-by: Eric Anholt Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk

drm/ttm: revert "implement LRU add callbacks v2"

2017-01-27T17:20:34+00:00

The additional housekeeping had too much CPU overhead, let's use the BO priorities instead. agd: also revert hibmc changes Reviewed-by: Sinclair Yeh Signed-off-by: Christian König Reviewed-and-Tested-by: Roger.He Signed-off-by: Alex Deucher

drm/mgag200: Added support for the new device G200eH3

2017-01-23T01:57:08+00:00

- Added the new device ID - Added new pll algorithm Signed-off-by: Mathieu Larouche Signed-off-by: Dave Airlie

drm: fix compilations issues introduced by "drm: allow to use mmuless SoC"

2017-01-09T10:30:30+00:00

Removing MMU configuration flag from DRM make few automatic build failed when they answer yes to all flags. Add asm/vga.h file on Blackfin architecture to not broke compilation. Signed-off-by: Benjamin Gaignard Fixes: 62a0d98a188c ("drm: allow to use mmuless SoC") Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1483789151-6603-1-git-send-email-benjamin.gaignard@linaro.org

drm: Change the return type of the unload hook to void

2017-01-09T10:25:22+00:00

The integer returned by the unload hook is ignored by the drm core, so let's make it void. This patch was created using the following Coccinelle semantic script (except for the declaration and comment in drm_drv.h): Compile-tested only. // @ get_name @ struct drm_driver drv; identifier fn; @@ drv.unload = fn; @ replace_type @ identifier get_name.fn; @@ - int + void fn (...) { ... } @ remove_return_param @ identifier get_name.fn; @@ void fn (...) { <... if (...) return - ... ; ...> } @ drop_final_return @ identifier get_name.fn; @@ void fn (...) { ... - return 0; } // Suggested-by: Daniel Vetter Signed-off-by: Gabriel Krisman Bertazi Acked-by: Christian König . Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170106175731.29196-1-krisman@collabora.co.uk

gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomap

2017-01-04T09:15:37+00:00

Here, pci_iomap can fail, handle this case and return -ENOMEM. Signed-off-by: Arvind Yadav Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1483443027-13444-1-git-send-email-arvind.yadav.cs@gmail.com

drm: Don't include in

2016-12-18T10:59:29+00:00

used to define most of the in-kernel KMS API. It has now been split into separate files for each object type, but still includes most other KMS headers to avoid breaking driver compilation. As a step towards fixing that problem, remove the inclusion of from and include it instead where appropriate. Also remove the forward declarations of the drm_encoder and drm_encoder_helper_funcs structures from as they're not needed in the header. now has to include and contain a forward declaration of struct drm_encoder in order to allow including it as the first header in a compilation unit. Signed-off-by: Laurent Pinchart Reviewed-by: Daniel Vetter Reviewed-by: Sinclair Yeh # For vmwgfx Reviewed-by: Alex Deucher Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com

drm: Nuke fb->bits_per_pixel

2016-12-15T12:55:34+00:00

Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä Reviewed-by: Laurent Pinchart Reviewed-by: Alex Deucher (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com

drm: Nuke fb->depth

2016-12-15T12:55:33+00:00

Replace uses of fb->depth with fb->format->depth. Less duplicate information is a good thing. @@ struct drm_framebuffer *fb; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - fb->depth = E; ... } @@ struct nouveau_framebuffer *fb; @@ - fb->base.depth + fb->base.format->depth @@ struct drm_framebuffer fb; @@ - fb.depth + fb.format->depth @@ struct drm_framebuffer *fb; @@ - fb->depth + fb->format->depth @@ struct drm_framebuffer fb; @@ - (fb.format->depth) + fb.format->depth @@ struct drm_framebuffer *fb; @@ - (fb->format->depth) + fb->format->depth @@ @@ struct drm_framebuffer { ... - unsigned int depth; ... }; v2: Drop the vmw stuff (Daniel) Rerun spatch due to code changes Signed-off-by: Ville Syrjälä Reviewed-by: Laurent Pinchart Reviewed-by: Alex Deucher Reviewed-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1481751095-18249-1-git-send-email-ville.syrjala@linux.intel.com

drm: Pass 'dev' to drm_helper_mode_fill_fb_struct()

2016-12-15T12:03:30+00:00

Pass the drm_device to drm_helper_mode_fill_fb_struct() so that we can populate fb->dev early. Will make it easier to use the fb before we register it. @@ identifier fb, mode_cmd; @@ void drm_helper_mode_fill_fb_struct( + struct drm_device *dev, struct drm_framebuffer *fb, const struct drm_mode_fb_cmd2 *mode_cmd ); @@ identifier fb, mode_cmd; @@ void drm_helper_mode_fill_fb_struct( + struct drm_device *dev, struct drm_framebuffer *fb, const struct drm_mode_fb_cmd2 *mode_cmd ) { ... } @@ function func; identifier dev; expression E1, E2; @@ func(struct drm_device *dev, ...) { ... drm_helper_mode_fill_fb_struct( + dev, E1, E2); ... } @@ expression E1, E2; @@ drm_helper_mode_fill_fb_struct( + dev, E1, E2); v2: Rerun spatch due to code changes Signed-off-by: Ville Syrjälä Reviewed-by: Laurent Pinchart Reviewed-by: Alex Deucher Link: http://patchwork.freedesktop.org/patch/msgid/1481748539-18283-1-git-send-email-ville.syrjala@linux.intel.com