kernel/linux.git/drivers/gpu/drm/mediatek, branch v5.4.203

drm/mediatek: Fix mtk_cec_mask()

2022-06-14T16:11:32+00:00

[ Upstream commit 2c5d69b0a141e1e98febe3111e6f4fd8420493a5 ] In current implementation, mtk_cec_mask() writes val into target register and ignores the mask. After talking to our hdmi experts, mtk_cec_mask() should read a register, clean only mask bits, and update (val | mask) bits to the register. Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220315232301.2434-1-miles.chen@mediatek.com/ Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Signed-off-by: Miles Chen Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Matthias Brugger Cc: Zhiqiang Lin Cc: CK Hu Cc: Matthias Brugger Cc: AngeloGioacchino Del Regno Signed-off-by: Chun-Kuang Hu Signed-off-by: Sasha Levin

drm/mediatek: Fix PM reference leak in mtk_crtc_ddp_hw_init()

2021-07-19T06:53:08+00:00

[ Upstream commit 69777e6ca396f0a7e1baff40fcad4a9d3d445b7a ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot Signed-off-by: Wang Li Signed-off-by: Chun-Kuang Hu Signed-off-by: Sasha Levin

drm/mediatek: avoid dereferencing a null hdmi_phy on an error message

2020-12-30T10:51:21+00:00

[ Upstream commit b097efba9580d1f7cbc80cda84e768983e3de541 ] Currently there is a null pointer check for hdmi_phy that implies it may be null, however a dev_err messages dereferences this potential null pointer. Avoid a null pointer dereference by only emitting the dev_err message if hdmi_phy is non-null. It is a moot point if the error message needs to be printed at all, but since this is a relatively new piece of code it may be useful to keep the message in for the moment in case there are unforseen errors that need to be reported. Fixes: be28b6507c46 ("drm/mediatek: separate hdmi phy to different file") Signed-off-by: Colin Ian King Addresses-Coverity: ("Dereference after null check") Link: https://lore.kernel.org/r/20201207150937.170435-1-colin.king@canonical.com [vkoul: fix indent of return call] Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata()

2020-09-23T10:40:42+00:00

[ Upstream commit 0680a622318b8d657323b94082f4b9a44038dfee ] if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have a corresponding put_device(). Thus add jump target to fix the exception handling for this function implementation. Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Signed-off-by: Yu Kuai Signed-off-by: Chun-Kuang Hu Signed-off-by: Sasha Levin

drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail

2020-09-23T10:40:42+00:00

[ Upstream commit 64c194c00789889b0f9454f583712f079ba414ee ] mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it fail, previous successive init component is not proccessed. Thus uninitialize valid component and put their device if component init failed. Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Yu Kuai Signed-off-by: Chun-Kuang Hu Signed-off-by: Sasha Levin

drm/mediatek: Check plane visibility in atomic_update

2020-07-16T06:16:37+00:00

[ Upstream commit c0b8892e2461b5fa740e47efbb1269a487b04020 ] Disable the plane if it's not visible. Otherwise mtk_ovl_layer_config() would proceed with invalid plane and we may see vblank timeout. Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Hsin-Yi Wang Reviewed-by: Tomasz Figa Signed-off-by: Chun-Kuang Hu Signed-off-by: Sasha Levin

drm/mediatek: set dpi pin mode to gpio low to avoid leakage current

2020-06-22T07:30:58+00:00

[ Upstream commit 6bd4763fd532cff43f9b15704f324c45a9806f53 ] Config dpi pins mode to output and pull low when dpi is disabled. Aovid leakage current from some dpi pins (Hsync Vsync DE ... ). Signed-off-by: Jitao Shi Signed-off-by: Chun-Kuang Hu Signed-off-by: Sasha Levin

drm/mediatek: Find the cursor plane instead of hard coding it

2020-03-25T07:25:42+00:00

[ Upstream commit 318caac7c81cdf5806df30c3d72385659a5f0f53 ] The cursor and primary planes were hard coded. Now search for them for passing to drm_crtc_init_with_planes Signed-off-by: Evan Benn Reviewed-by: Sean Paul Signed-off-by: CK Hu Signed-off-by: Sasha Levin

drm/mediatek: Add gamma property according to hardware capability

2020-02-24T07:36:44+00:00

[ Upstream commit 4cebc1de506fa753301266a5a23bb21bca52ad3a ] If there is no gamma function in the crtc display path, don't add gamma property for crtc Fixes: 2f3f4dda747c ("drm/mediatek: Add gamma correction.") Signed-off-by: Yongqiang Niu Signed-off-by: Hsin-Yi Wang Signed-off-by: CK Hu Signed-off-by: Sasha Levin

drm/mediatek: handle events when enabling/disabling crtc

2020-02-24T07:36:39+00:00

[ Upstream commit 411f5c1eacfebb1f6e40b653d29447cdfe7282aa ] The driver currently handles vblank events only when updating planes on an already enabled CRTC. The atomic update API however allows requesting an event when enabling or disabling a CRTC. This currently leads to event objects being leaked in the kernel and to events not being sent out. Fix it. Signed-off-by: Bibby Hsieh Signed-off-by: CK Hu Signed-off-by: Sasha Levin