kernel/linux.git/drivers/gpu/drm/mediatek/Kconfig, branch linux-6.9.y

drm/mediatek: dp: Add support for embedded DisplayPort aux-bus

2023-08-09T23:25:00+00:00

For the eDP case we can support using aux-bus on MediaTek DP: this gives us the possibility to declare our panel as generic "panel-edp" which will automatically configure the timings and available modes via the EDID that we read from it. To do this, move the panel parsing at the end of the probe function so that the hardware is initialized beforehand and also initialize the DPTX AUX block and power both on as, when we populate the aux-bus, the panel driver will trigger an EDID read to perform panel detection. Last but not least, since now the AUX transfers can happen in the separated aux-bus, it was necessary to add an exclusion for the cable_plugged_in check in `mtk_dp_aux_transfer()` and the easiest way to do this is to simply ignore checking that when the bridge type is eDP. Signed-off-by: AngeloGioacchino Del Regno Tested-by: Chen-Yu Tsai Reviewed-by: Alexandre Mergnat Reviewed-by: CK Hu Link: https://patchwork.kernel.org/project/dri-devel/patch/20230725073234.55892-10-angelogioacchino.delregno@collabora.com/ Signed-off-by: Chun-Kuang Hu

drm/mediatek: Remove dependency on GEM DMA helper

2023-01-27T02:59:48+00:00

It appears that the dependency on the DMA helpers was only for drm_gem_dma_vm_ops. Signed-off-by: Rob Clark Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230119224052.2879106-1-robdclark@gmail.com/ Signed-off-by: Chun-Kuang Hu

drm/mediatek: Add MT8195 Embedded DisplayPort driver

2022-09-04T12:32:05+00:00

This patch adds a embedded displayport driver for the MediaTek mt8195 SoC. It supports the MT8195, the embedded DisplayPort units. It offers DisplayPort 1.4 with up to 4 lanes. The driver creates a child device for the phy. The child device will never exist without the parent being active. As they are sharing a register range, the parent passes a regmap pointer to the child so that both can work with the same register range. The phy driver sets device data that is read by the parent to get the phy device that can be used to control the phy properties. This driver is based on an initial version by Jitao shi Signed-off-by: Markus Schneider-Pargmann Signed-off-by: Guillaume Ranquet Signed-off-by: Bo-Chen Chen Reviewed-by: CK Hu Tested-by: AngeloGioacchino Del Regno Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Dmitry Osipenko Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-4-rex-bc.chen@mediatek.com

drm/gem: rename GEM CMA helpers to GEM DMA helpers

2022-08-03T16:31:49+00:00

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg Acked-by: Thomas Zimmermann Reviewed-by: Laurent Pinchart Signed-off-by: Danilo Krummrich Reviewed-by: Liviu Dudau #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com

phy: mediatek: Move mtk_mipi_dsi_phy driver into drivers/phy/mediatek folder

2020-11-30T15:42:40+00:00

mtk_mipi_dsi_phy is currently placed inside mediatek drm driver, but it's more suitable to place a phy driver into phy driver folder, so move mtk_mipi_dsi_phy driver into phy driver folder. Signed-off-by: Chun-Kuang Hu Acked-by: Chunfeng Yun Acked-by: Vinod Koul

drm/mediatek: Separate mtk_mipi_tx to an independent module

2020-11-30T15:37:40+00:00

mtk_mipi_tx is a part of mtk_drm module, but phy driver should be an independent module rather than be part of drm module, so separate the phy driver to an independent module. Signed-off-by: Chun-Kuang Hu

phy: mediatek: Move mtk_hdmi_phy driver into drivers/phy/mediatek folder

2020-09-05T23:03:21+00:00

mtk_hdmi_phy is currently placed inside mediatek drm driver, but it's more suitable to place a phy driver into phy driver folder, so move mtk_hdmi_phy driver into phy driver folder. Signed-off-by: CK Hu Signed-off-by: Chun-Kuang Hu Acked-by: Chunfeng Yun Tested-by: Frank Wunderlich

drm/mediatek: Separate mtk_hdmi_phy to an independent module

2020-09-05T23:02:54+00:00

mtk_hdmi_phy is a part of mtk_hdmi module, but phy driver should be an independent module rather than be part of drm module, so separate the phy driver to an independent module. Signed-off-by: CK Hu Signed-off-by: Chun-Kuang Hu Tested-by: Frank Wunderlich

drm/mediatek: Fix Kconfig warning

2020-06-27T00:58:21+00:00

WARNING: unmet direct dependencies detected for MTK_MMSYS Depends on [n]: (ARCH_MEDIATEK [=y] || COMPILE_TEST [=n]) && COMMON_CLK_MT8173_MMSYS [=n] Selected by [y]: - DRM_MEDIATEK [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARCH_MEDIATEK [=y] || ARM && COMPILE_TEST [=n]) && COMMON_CLK [=y] && HAVE_ARM_SMCCC [=y] && OF [=y] Make DRM_MEDIATEK depend on MTK_MMSYS to fix this. Fixes: 2c758e301ed9 ("soc / drm: mediatek: Move routing control to mmsys device") Signed-off-by: YueHaibing Reviewed-by: Enric Balletbo i Serra Signed-off-by: Chun-Kuang Hu

soc / drm: mediatek: Move routing control to mmsys device

2020-04-13T11:01:16+00:00

Provide a mtk_mmsys_ddp_connect() and mtk_mmsys_disconnect() functions to replace mtk_ddp_add_comp_to_path() and mtk_ddp_remove_comp_from_path(). Those functions will allow DRM driver and others to control the data path routing. Signed-off-by: Enric Balletbo i Serra Reviewed-by: Matthias Brugger Reviewed-by: CK Hu Acked-by: CK Hu Tested-by: Anders Roxell Reviewed-by: Chun-Kuang Hu Signed-off-by: Matthias Brugger