kernel/linux.git/drivers/gpu/drm/imx, branch v4.9.236

drm/imx: imx-ldb: Disable both channels for split mode in enc->disable()

2020-08-26T08:29:02+00:00

[ Upstream commit 3b2a999582c467d1883716b37ffcc00178a13713 ] Both of the two LVDS channels should be disabled for split mode in the encoder's ->disable() callback, because they are enabled in the encoder's ->enable() callback. Fixes: 6556f7f82b9c ("drm: imx: Move imx-drm driver out of staging") Cc: Philipp Zabel Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: NXP Linux Team Cc: Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin

drm/imx: tve: fix regulator_disable error path

2020-08-21T09:02:02+00:00

[ Upstream commit 7bb58b987fee26da2a1665c01033022624986b7c ] Add missing regulator_disable() as devm_action to avoid dedicated unbind() callback and fix the missing error handling. Fixes: fcbc51e54d2a ("staging: drm/imx: Add support for Television Encoder (TVEv2)") Signed-off-by: Marco Felsch Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin

drm/imx: only send event on crtc disable if kept disabled

2019-07-10T07:55:46+00:00

commit 5aeab2bfc9ffa72d3ca73416635cb3785dfc076f upstream. The event will be sent as part of the vblank enable during the modeset if the crtc is not being kept disabled. Fixes: 5f2f911578fb ("drm/imx: atomic phase 3 step 1: Use atomic configuration") Signed-off-by: Robert Beckett Reviewed-by: Daniel Vetter Signed-off-by: Philipp Zabel Signed-off-by: Greg Kroah-Hartman

drm/imx: notify drm core before sending event during crtc disable

2019-07-10T07:55:46+00:00

commit 78c68e8f5cd24bd32ba4ca1cdfb0c30cf0642685 upstream. Notify drm core before sending pending events during crtc disable. This fixes the first event after disable having an old stale timestamp by having drm_crtc_vblank_off update the timestamp to now. This was seen while debugging weston log message: Warning: computed repaint delay is insane: -8212 msec This occurred due to: 1. driver starts up 2. fbcon comes along and restores fbdev, enabling vblank 3. vblank_disable_fn fires via timer disabling vblank, keeping vblank seq number and time set at current value (some time later) 4. weston starts and does a modeset 5. atomic commit disables crtc while it does the modeset 6. ipu_crtc_atomic_disable sends vblank with old seq number and time Fixes: a474478642d5 ("drm/imx: fix crtc vblank state regression") Signed-off-by: Robert Beckett Reviewed-by: Daniel Vetter Signed-off-by: Philipp Zabel Signed-off-by: Greg Kroah-Hartman

drm/imx: imx-ldb: check if channel is enabled before printing warning

2018-09-05T07:20:00+00:00

[ Upstream commit c80d673b91a6c81d765864e10f2b15110ee900ad ] If the second LVDS channel has been disabled in the DT when using dual-channel mode we should not print a warning. Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

drm/imx: imx-ldb: disable LDB on driver bind

2018-09-05T07:20:00+00:00

[ Upstream commit b58262396fabd43dc869b576e3defdd23b32fe94 ] The LVDS signal integrity is only guaranteed when the correct enable sequence (first IPU DI, then LDB) is used. If the LDB display output was active before the imx-drm driver is loaded (like when a bootsplash was active) the DI will be disabled by the full IPU reset we do when loading the driver. The LDB control registers are not part of the IPU range and thus will remain unchanged. This leads to the LDB still being active when the DI is getting enabled, effectively reversing the required enable sequence. Fix this by also disabling the LDB on driver bind. Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

drm/imx: move arming of the vblank event to atomic_flush

2018-05-30T05:50:37+00:00

[ Upstream commit 6a055b92de15af987b4027826d43aa103c65a3c4 ] Right now the vblank event completion is racing with the atomic update, which is especially bad when the PRE is in use, as one of the hardware issue workaround might extend the atomic commit for quite some time. If the vblank IRQ happens to trigger during that time, we will prematurely signal the atomic commit completion to userspace, which causes tearing when userspace re-uses a framebuffer we haven't managed to flip away from yet. Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

drm/imx: imx-tve: Do not set the regulator voltage

2017-03-15T02:02:50+00:00

commit fc12bccda8b6f5c38139eceec9e369ed78091b2b upstream. Commit deb65870b5d9d ("drm/imx: imx-tve: check the value returned by regulator_set_voltage()") exposes the following probe issue: 63ff0000.tve supply dac not found, using dummy regulator imx-drm display-subsystem: failed to bind 63ff0000.tve (ops imx_tve_ops): -22 When the 'dac-supply' is not passed in the device tree a dummy regulator is used and setting its voltage is not allowed. To fix this issue, do not set the dac-supply voltage inside the driver and let its voltage be specified in the device tree. Print a warning if the the 'dac-supply' voltage has a value different from 2.75V. Fixes: deb65870b5d9d ("drm/imx: imx-tve: check the value returned by regulator_set_voltage()") Suggested-by: Lucas Stach Signed-off-by: Fabio Estevam Signed-off-by: Philipp Zabel Signed-off-by: Greg Kroah-Hartman

drm/imx: disable planes before DC

2016-11-09T09:35:50+00:00

If the DC clock is disabled before the attached IDMACs are properly stopped the IDMACs may hang the IPU or even the whole system. Make sure the IDMACs are in safe state by disabling the planes before removal of the DC clock. Also set the atomic parameter to false to stop calling the atomic_begin hook, which does nothing useful as we immediately afterwards turn off vblank interrupts and possibly send the pending vblank event. Fixes: 33f14235302f (drm/imx: atomic phase 1: Use transitional atomic CRTC and plane helpers) Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel

drm/imx: ipuv3-plane: disable local alpha for planes without alpha channel

2016-10-20T12:39:51+00:00

Without this patch, after enabling the overlay plane with an RGBA framebuffer, switching to a framebuffer without alpha channel would cause the plane to vanish, since the pixel local alpha is constant zero in that case. Disable local alpha again when setting an opaque framebuffer. Signed-off-by: Philipp Zabel