kernel/linux.git/drivers/gpu/drm/drm_gem.c, branch v4.19.27

drm/i915: Prevent writing into a read-only object via a GGTT mmap

2018-07-13T15:14:04+00:00

If the user has created a read-only object, they should not be allowed to circumvent the write protection by using a GGTT mmapping. Deny it. Also most machines do not support read-only GGTT PTEs, so again we have to reject attempted writes. Fortunately, this is known a priori, so we can at least reject in the call to create the mmap (with a sanity check in the fault handler). v2: Check the vma->vm_flags during mmap() to allow readonly access. v3: Remove VM_MAYWRITE to curtail mprotect() Testcase: igt/gem_userptr_blits/readonly_mmap* Signed-off-by: Chris Wilson Cc: Jon Bloomfield Cc: Joonas Lahtinen Cc: Matthew Auld Cc: David Herrmann Reviewed-by: Matthew Auld #v1 Reviewed-by: Jon Bloomfield Reviewed-by: Joonas Lahtinen Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-4-chris@chris-wilson.co.uk

drm/gem: Document that handle_create must be the last step

2018-03-26T15:42:06+00:00

It published the gem object to userspace, by that point other threads can guess the id and start using it. And gem IDs are _very_ easy to guess (it's just an idr). Since gem objects is the only thing we allow drivers to create themselves (all the kms/prime/syncobj stuff is handled by the core) no other functions seem to be in need of this clarification. Motivated by reviewing the xen-front kms driver. Cc: Oleksandr Andrushchenko Reviewed-by: Oleksandr Andrushchenko Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20180322080233.17266-1-daniel.vetter@ffwll.ch

drm: Use idr_init_base(1) when using id==0 for invalid

2018-02-19T12:21:24+00:00

Use the new idr_init_base() function to create an IDR that knows id==0 is never allocated as it maps to an invalid identifier. By knowing that id==0 is invalid, the IDR can start from id=1 instead avoiding the issue of having to start each lookup from the zeroth leaf as id==0 is always unused (and thus the tree-of-bitmaps indicate that is the first available). References: 6ce711f27500 ("idr: Make 1-based IDRs more efficient") Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: Christian Konig Cc: Dave Airlie Reviewed-by: Ville Syrjälä Acked-by: Christian König as well. Link: https://patchwork.freedesktop.org/patch/msgid/20180212145533.30046-1-chris@chris-wilson.co.uk

drm/framebuffer: Add framebuffer debugfs file

2017-11-11T10:21:19+00:00

Add debugfs file that dumps info about the framebuffers and its planes. Also dump info about any connected gem object(s). Reviewed-by: Daniel Vetter Signed-off-by: Noralf Trønnes Reviewed-by: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-5-noralf@tronnes.org

drm/gem: Remove trailing whitespace

2017-10-27T15:20:09+00:00

Remove two trailing spaces. Signed-off-by: Noralf Trønnes Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20171026165731.5793-4-noralf@tronnes.org

drm: fix typo in drm_gem_get_pages() comment

2017-10-04T16:04:28+00:00

I spent an embarrassingly long time looking for drm_gem_init_object() before I realized I was actually looking for drm_gem_object_init(). Fix the typo to keep other poor developers from suffering the same fate. Signed-off-by: Jordan Crouse Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/1507045091-6550-1-git-send-email-jcrouse@codeaurora.org

Merge airlied/drm-next into drm-misc-next

2017-10-03T09:09:16+00:00

Just catching up with upstream. Signed-off-by: Daniel Vetter

Merge tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc into drm-next

2017-09-27T19:46:15+00:00

UAPI Changes: Cross-subsystem Changes: Core Changes: - DP SDP defines (Ville) - polish for scdc helpers (Thierry Reding) - fix lifetimes for connector/plane state across crtc changes (Maarten Lankhorst). - sparse fixes (Ville+Thierry) - make legacy kms ioctls all interruptible (Maarten) - push edid override into the edid helpers (out of probe helpers) (Jani) - DP ESI defines for link status (DK) Driver Changes: - drm-panel is now in drm-misc! - minor panel-simple cleanups/refactoring by various folks - drm_bridge_add cleanup (Inki Dae) - constify a few i2c_device_id structs (Arvind Yadav) - More patches from Noralf's fb/gem helper cleanup - bridge/synopsis: reset fix (Philippe Cornu) - fix tracepoint include handling in drivers (Thierry) - rockchip: lvds support (Sandy Huang) - move sun4i into drm-misc fold (Maxime Ripard) - sun4i: refactor driver load + support TCON backend/layer muxing (Chen-Yu Tsai) - pl111: support more pl11x variants (Linus Walleij) - bridge/adv7511: robustify probing/edid handling (Lars-Petersen Clausen) New hw support: - S6E63J0X03 panel (Hoegeun Kwon) - OTM8009A panel (Philippe CORNU) - Seiko 43WVF1G panel (Marco Franchi) - tve200 driver (Linus Walleij) Plus assorted of tiny patches all over, including our first outreachy patches from applicants for the winter round! * tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits) drm: add backwards compatibility support for drm_kms_helper.edid_firmware drm: handle override and firmware EDID at drm_do_get_edid() level drm/dp: DPCD register defines for link status within ESI field drm/rockchip: Replace dev_* with DRM_DEV_* drm/tinydrm: Drop driver registered message drm/gem-fb-helper: Use debug message on gem lookup failure drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb() drm/bridge: adv7511: Constify HDMI CODEC platform data drm/bridge: adv7511: Enable connector polling when no interrupt is specified drm/bridge: adv7511: Remove private copy of the EDID drm/bridge: adv7511: Properly update EDID when no EDID was found drm/crtc: Convert setcrtc ioctl locking to interruptible. drm/atomic: Convert pageflip ioctl locking to interruptible. drm/legacy: Convert setplane ioctl locking to interruptible. drm/legacy: Convert cursor ioctl locking to interruptible. drm/atomic: Convert atomic ioctl locking to interruptible. drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2. drm/tve200: Clean up panel bridging drm/doc: Update todo.rst drm/dp/mst: Sideband message transaction to power up/down nodes ...

drm: Remove obsolete "This is gross" comment

2017-09-26T05:23:18+00:00

Remove obsolete comment which was initially added in 2008 to annotate that idr_find() was used before idr_remove() since idr_remove() didn't use to return feedback. The comment now is irrelevant with commit f6cd7daecff5 ("drm: Release driver references to handle before making it available again"). Signed-off-by: Haneen Mohammed Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20170921210424.GA21951@Haneen

Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-09-04T19:21:28+00:00

Pull x86 mm changes from Ingo Molnar: "PCID support, 5-level paging support, Secure Memory Encryption support The main changes in this cycle are support for three new, complex hardware features of x86 CPUs: - Add 5-level paging support, which is a new hardware feature on upcoming Intel CPUs allowing up to 128 PB of virtual address space and 4 PB of physical RAM space - a 512-fold increase over the old limits. (Supercomputers of the future forecasting hurricanes on an ever warming planet can certainly make good use of more RAM.) Many of the necessary changes went upstream in previous cycles, v4.14 is the first kernel that can enable 5-level paging. This feature is activated via CONFIG_X86_5LEVEL=y - disabled by default. (By Kirill A. Shutemov) - Add 'encrypted memory' support, which is a new hardware feature on upcoming AMD CPUs ('Secure Memory Encryption', SME) allowing system RAM to be encrypted and decrypted (mostly) transparently by the CPU, with a little help from the kernel to transition to/from encrypted RAM. Such RAM should be more secure against various attacks like RAM access via the memory bus and should make the radio signature of memory bus traffic harder to intercept (and decrypt) as well. This feature is activated via CONFIG_AMD_MEM_ENCRYPT=y - disabled by default. (By Tom Lendacky) - Enable PCID optimized TLB flushing on newer Intel CPUs: PCID is a hardware feature that attaches an address space tag to TLB entries and thus allows to skip TLB flushing in many cases, even if we switch mm's. (By Andy Lutomirski) All three of these features were in the works for a long time, and it's coincidence of the three independent development paths that they are all enabled in v4.14 at once" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (65 commits) x86/mm: Enable RCU based page table freeing (CONFIG_HAVE_RCU_TABLE_FREE=y) x86/mm: Use pr_cont() in dump_pagetable() x86/mm: Fix SME encryption stack ptr handling kvm/x86: Avoid clearing the C-bit in rsvd_bits() x86/CPU: Align CR3 defines x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages acpi, x86/mm: Remove encryption mask from ACPI page protection type x86/mm, kexec: Fix memory corruption with SME on successive kexecs x86/mm/pkeys: Fix typo in Documentation/x86/protection-keys.txt x86/mm/dump_pagetables: Speed up page tables dump for CONFIG_KASAN=y x86/mm: Implement PCID based optimization: try to preserve old TLB entries using PCID x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y x86/mm: Allow userspace have mappings above 47-bit x86/mm: Prepare to expose larger address space to userspace x86/mpx: Do not allow MPX if we have mappings above 47-bit x86/mm: Rename tasksize_32bit/64bit to task_size_32bit/64bit() x86/xen: Redefine XEN_ELFNOTE_INIT_P2M using PUD_SIZE * PTRS_PER_PUD x86/mm/dump_pagetables: Fix printout of p4d level x86/mm/dump_pagetables: Generalize address normalization x86/boot: Fix memremap() related build failure ...