kernel/linux.git/drivers/gpu/drm/drm_client.c, branch v6.6.132

drm/client: Send hotplug event after registering a client

2023-07-11T12:02:01+00:00

Generate a hotplug event after registering a client to allow the client to configure its display. Remove the hotplug calls from the existing clients for fbdev emulation. This change fixes a concurrency bug between registering a client and receiving events from the DRM core. The bug is present in the fbdev emulation of all drivers. The fbdev emulation currently generates a hotplug event before registering the client to the device. For each new output, the DRM core sends an additional hotplug event to each registered client. If the DRM core detects first output between sending the artificial hotplug and registering the device, the output's hotplug event gets lost. If this is the first output, the fbdev console display remains dark. This has been observed with amdgpu and fbdev-generic. Fix this by adding hotplug generation directly to the client's register helper drm_client_register(). Registering the client and receiving events are serialized by struct drm_device.clientlist_mutex. So an output is either configured by the initial hotplug event, or the client has already been registered. The bug was originally added in commit 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done"), in which adding a client and receiving a hotplug event switched order. It was hidden, as most hardware and drivers have at least on static output configured. Other drivers didn't use the internal DRM client or still had struct drm_mode_config_funcs.output_poll_changed set. That callback handled hotplug events as well. After not setting the callback in amdgpu in commit 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed"), amdgpu did not show a framebuffer console if output events got lost. The bug got copy-pasted from fbdev-generic into the other fbdev emulation. Reported-by: Moritz Duge Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649 Fixes: 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done") Fixes: 8ab59da26bc0 ("drm/fb-helper: Move generic fbdev emulation into separate source file") Fixes: b79fe9abd58b ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers") Fixes: 63c381552f69 ("drm/armada: Implement fbdev emulation as in-kernel client") Fixes: 49953b70e7d3 ("drm/exynos: Implement fbdev emulation as in-kernel client") Fixes: 8f1aaccb04b7 ("drm/gma500: Implement client-based fbdev emulation") Fixes: 940b869c2f2f ("drm/msm: Implement fbdev emulation as in-kernel client") Fixes: 9e69bcd88e45 ("drm/omapdrm: Implement fbdev emulation as in-kernel client") Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation") Fixes: 71ec16f45ef8 ("drm/tegra: Implement fbdev emulation as in-kernel client") Fixes: 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed") Signed-off-by: Thomas Zimmermann Tested-by: Moritz Duge Tested-by: Torsten Krah Tested-by: Paul Schyska Cc: Daniel Vetter Cc: David Airlie Cc: Noralf Trønnes Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Javier Martinez Canillas Cc: Russell King Cc: Inki Dae Cc: Seung-Woo Kim Cc: Kyungmin Park Cc: Krzysztof Kozlowski Cc: Patrik Jakobsson Cc: Rob Clark Cc: Abhinav Kumar Cc: Dmitry Baryshkov Cc: Tomi Valkeinen Cc: Alex Deucher Cc: "Christian König" Cc: "Pan, Xinhui" Cc: Thierry Reding Cc: Mikko Perttunen Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: # v5.2+ Reviewed-by: Javier Martinez Canillas Reviewed-by: Dmitry Baryshkov # msm Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de

Merge tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm

2023-02-23T02:28:03+00:00

Pull drm updates from Dave Airlie: "There are a bunch of changes all over in the usual places. Highlights: - habanalabs moves from misc to accel - first accel driver for Intel VPU (Versatile Processing Unit) inference engine - dropped all the ancient legacy DRI1 drivers. I think it's been at least 10 years since anyone has heard about these. - Intel DG2 updates and prelim Meteorlake enablement - etnaviv adds support for Versilicon NPU device (a GPU like engine with inference accelerators) Detailed summary: Removals: - remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via New driver: - intel VPU accelerator driver - habanalabs comes via drm tree now drm/core: - use drm_dbg_ helpers in several places - Document defaults for CRTC backgrounds - Document use of drm_minor edid: - improve mode parsing and refactoring connector: - support analog TV mode property media: - add some common formats udmabuf: - add vmap/vunmap methods fourcc: - add XRGB1555 and RGB565 formats - document open source user waiver firmware: - fix color-format selection for system framebuffer format-helper: - Add conversion from XRGB8888 to various sysfb formats - Make XRGB8888 the only driver-emulated legacy format - Add conversion from XRGB8888 to XBGR8888 and ABGR8888 fb-helper: - fix preferred depth and bpp values across drivers - Avoid blank consoles from selecting an incorrect color format probe-helper: - Enable/disable HPD on connectors scheduler: - Fix lockup in drm_sched_entity_kill() - Deprecate drm_sched_resubmit_jobs() bridge: - remove unused functions - implement i2c probe_new in various drivers - ite-it6505: Locking fixes, Cache EDID data - ite-it66121: Support IT6610 chip - lontium-tl9611: Fix HDMI on DragonBoard 845c - parade-ps8640: Use atomic bridge functions - Support i.MX93 LDB plus DT bindings debugfs: - add per device helpers and convert drivers displayport: - mst fixes - add DP adaptive sync DPCD definitions fbdev: - always pick 32bpp as default - remove some unused code simpledrm: - support system memory framebuffers panel: - add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50 - Use ktime_get_boottime() to measure power-down delay - Fix auto-suspend delay - Visionox VTDR6130 AMOLED DSI - Support Himax HX8394 - Convert many drivers to common generic DSI write-sequence helper - AUO A030JTN01 ttm: - drop bo wait wrapper - fix MIPS build habanalabs: - moved driver to accel subsystem - gaudi2 decoder error improvement - more trace events - Gaudi2 abrupt reset by firmware support - add uAPI to flush memory transactions - add uAPI to pass through userspace reqs to fw - remove dma-buf export by handle amdgpu: - add new INFO queries for peak and min sclk/mclk for profile modes - Add PCIe info to the INFO IOCTL - secure display support for multiple displays - DML optimizations - DCN 3.2 updates - PSR updates - DP 2.1 updates - SR-IOV RAS updates - VCN RAS support - SMU 13.x updates - Switch 1 element arrays to flexible arrays - Add RAS support for DF 4.3 - Stack size improvements - S0ix rework - Allow 0 as a vram limit on APUs - Handle profiling modes for SMU13.x - Fix possible segfault in failure case - Rework FW requests to happen in early_init for all IPs so that we don't lose the sbios console if FW is missing - Fix power reporting on certain firmwares for CZN/RN - Allow S0ix without BIOS support - Enable freesync over PCon - Re-enable the AGP aperture on GMC 11.x amdkfd: - Error handling fixes - PASID fixes - Fix for cleared VRAM BOs - Fix cleanup if GPUVM creation fails - Memory accounting fix - Use resource_size rather than open codeing it - GC11 mGPU fix radeon: - Switch 1 element arrays to flexible arrays - Fix memory leak on shutdown - move to new logging i915: - Meteorlake display/OA/GSC fw/workarounds enabling - DP MST DSC support - Gamma/degamma readout support for the state checker - Enable SDP split support for DP 2.0 - Add probe blocking support to i915.force_probe parameter - Enable Xe HP 4tile support - Avoid display direct calls to uncore - Fix HuC delayed load memory leaks - Add DG2 workarounds Wa_18018764978 and Wa_18019271663 - Improve suspend / resume times with VT-d scanout workaround active - Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state - Fix TLB invalidation for Gen12.50 video and compute engines - Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid - Start using unversioned DMC firmware paths for new platforms - ELD refactor: Stop using hardware buffer, precompute ELD - lots of display code refactoring nouveau: - drop legacy ioctl support - replace 0-sized array msm: - dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform - Added bindings for SM8150 - dpu: Partial support for DSC on SM8150 and SM8250 - dpu: Fixed color transformation matrix being lost on suspend/resume - dp: Support SDM845 and SC8280XP platforms - dp: Support for limiting DP link rate via DT property - dsi: Validate display modes according to the DSI OPP table - dsi: DSI PHY support for the SM6375 platform - Add MSM_SUBMIT_BO_NO_IMPLICI - a2xx: Support to load legacy firmware - a6xx: GPU devcore dump updates for a650/a660 - GPU devfreq tuning and fixes - Turn 8960 HDMI PHY into clock provider, - Make 8960 HDMI PHY use PXO clock from DT etnaviv: - experimental versilicon NPU support - report GPU load via fdinfo format - MMU fault message improvements tegra: - rework syncpoint interrupt mediatek: - DSI timing fix - fix config deps ast: - various fixes exynos: - restore bridge chain order fixes gud: - convert to shadow plane buffers - perform flushing synchronously during atomic update - Use new debugfs helpers arm/hdlcd: - Use new debugfs helper ili9486: - Support 16-bit pixel data imx: - Split off IPUv3 driver mipi-dbi: - convert to DRM shadow-plane helpers - rsp driver changes - Support separate I/O-voltage supply mxsfb: - Depend on ARCH_MXS or ARCH_MXC sun4i: - convert to new TV mode property vc4: - convert to new TV mode property - kunit tests - Support RGB565 and RGB666 formats - convert dsi driver to bridge - Various HVS an CRTC fixes v3d: - Do not opencode drm_gem_object_lookup() virtio: - improve tracing vkms: - support small cursors in IGT tests - Fix SEGFAULT from incorrect GEM-buffer mapping rcar-du: - fixes and improvements" * tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits) msm/fbdev: fix unused variable warning with clang. drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini() dma-buf: make kobj_type structure constant drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() drm/amd/display: disable SubVP + DRR to prevent underflow drm/amd/display: Fail atomic_check early on normalize_zpos error drm/amd/pm: avoid unaligned access warnings drm/amd/display: avoid unaligned access warnings drm/amd/display: Remove duplicate/repeating expressions drm/amd/display: Remove duplicate/repeating expression drm/amd/display: Make variables declaration inside ifdef guard drm/amd/display: Fix excess arguments on kernel-doc drm/amd/display: Add previously missing includes drm/amd/amdgpu: Add function prototypes to headers drm/amd/display: Add function prototypes to headers drm/amd/display: Turn global functions into static drm/amd/display: remove unused _calculate_degamma_curve function drm/amd/display: remove unused func declaration from resource headers drm/amd/display: unset initial value for tf since it's never used drm/amd/display: camel case cleanup in color_gamma file ...

drm/client: fix circular reference counting issue

2023-02-07T08:42:56+00:00

We reference dump buffers both by their handle as well as their object. The problem is now that when anybody iterates over the DRM framebuffers and exports the underlying GEM objects through DMA-buf we run into a circular reference count situation. The result is that the fbdev handling holds the GEM handle preventing the DMA-buf in the GEM object to be released. This DMA-buf in turn holds a reference to the driver module which on unload would release the fbdev. Break that loop by releasing the handle as soon as the DRM framebuffer object is created. The DRM framebuffer and the DRM client buffer structure still hold a reference to the underlying GEM object preventing its destruction. Signed-off-by: Christian König Fixes: c76f0f7cb546 ("drm: Begin an API for in-kernel clients") Cc: Reviewed-by: Thomas Zimmermann Tested-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20230126102814.8722-1-christian.koenig@amd.com

drm/client: Add hotplug_failed flag

2023-01-26T07:52:26+00:00

Signal failed hotplugging with a flag in struct drm_client_dev. If set, the client helpers will not further try to set up the fbdev display. This used to be signalled with a combination of cleared pointers in struct drm_fb_helper, which prevents us from initializing these pointers early after allocation. The change also harmonizes behavior among DRM clients. Additional DRM clients will now handle failed hotplugging like fbdev does. Signed-off-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-3-tzimmermann@suse.de

drm/client: Test for connectors before sending hotplug event

2023-01-26T07:52:25+00:00

Test for connectors in the client code and remove a similar test from the generic fbdev emulation. Do nothing if the test fails. Not having connectors indicates a driver bug. Signed-off-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-2-tzimmermann@suse.de

drm: use new debugfs device-centered functions on DRM core files

2022-12-22T17:58:21+00:00

Replace the use of drm_debugfs_create_files() with the new drm_debugfs_add_files() function in all DRM core files, centering the debugfs files management on the drm_device instead of drm_minor. Signed-off-by: Maíra Canal Reviewed-by: Maxime Ripard Reviewed-by: Melissa Wen Acked-by: Daniel Vetter Signed-off-by: Maíra Canal Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-3-mcanal@igalia.com

drm/client: Prevent NULL dereference in drm_client_buffer_delete()

2022-11-02T10:53:57+00:00

The drm_gem_vunmap() will crash with a NULL dereference if the passed object pointer is NULL. It wasn't a problem before we added the locking support to drm_gem_vunmap function because the mapping argument was always NULL together with the object. Make drm_client_buffer_delete() to check whether GEM is NULL before trying to unmap the GEM, it will happen on framebuffer creation error. Reported-by: Dan Carpenter Reviewed-by: Christian König Link: https://lore.kernel.org/dri-devel/Y1kFEGxT8MVlf32V@kili/ Fixes: 79e2cf2e7a19 ("drm/gem: Take reservation lock for vmap/vunmap operations") Signed-off-by: Dmitry Osipenko Link: https://patchwork.freedesktop.org/patch/msgid/20221030154412.8320-3-dmitry.osipenko@collabora.com

drm/client: Switch drm_client_buffer_delete() to unlocked drm_gem_vunmap

2022-10-24T19:05:43+00:00

The drm_client_buffer_delete() wasn't switched to unlocked GEM vunmapping by accident when rest of drm_client code transitioned to the unlocked variants of the vmapping functions. Make drm_client_buffer_delete() use the unlocked variant. This fixes lockdep warning splat about missing reservation lock when framebuffer is released. Reported-by: kernel test robot Link: https://lore.kernel.org/dri-devel/890f70db-68b0-8456-ca3c-c5496ef90517@collabora.com/T/ Fixes: 79e2cf2e7a19 ("drm/gem: Take reservation lock for vmap/vunmap operations") Signed-off-by: Dmitry Osipenko Acked-by: Christian König Link: https://patchwork.freedesktop.org/patch/msgid/20221020213335.309092-1-dmitry.osipenko@collabora.com

drm/gem: Take reservation lock for vmap/vunmap operations

2022-10-17T22:21:38+00:00

The new common dma-buf locking convention will require buffer importers to hold the reservation lock around mapping operations. Make DRM GEM core to take the lock around the vmapping operations and update DRM drivers to use the locked functions for the case where DRM core now holds the lock. This patch prepares DRM core and drivers to the common dynamic dma-buf locking convention. Acked-by: Christian König Signed-off-by: Dmitry Osipenko Link: https://patchwork.freedesktop.org/patch/msgid/20221017172229.42269-4-dmitry.osipenko@collabora.com

drm/client: Use actual bpp when allocating frame buffers

2022-07-09T13:00:52+00:00

When allocating a frame buffer, the number of bits per pixel needed is derived from the deprecated drm_format_info.cpp[] field. While this may work for formats using less than 8 bits per pixel, it does lead to a large overallocation. Reduce memory consumption by using the actual number of bits per pixel instead. Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/eabcf4f298184dabe46823fcf5ceffa1da0ec7ef.1657294931.git.geert@linux-m68k.org