kernel/linux.git/drivers/gpu/drm/display, branch v6.6.47

drm/dp_mst: Skip CSN if topology probing is not done yet

2024-08-14T11:59:00+00:00

commit ddf983488c3e8d30d5c2e2b315ae7d9cd87096ed upstream. [Why] During resume, observe that we receive CSN event before we start topology probing. Handling CSN at this moment based on uncertain topology is unnecessary. [How] Add checking condition in drm_dp_mst_handle_up_req() to skip handling CSN if the topology is yet to be probed. Cc: Lyude Paul Cc: Harry Wentland Cc: Jani Nikula Cc: Imre Deak Cc: Daniel Vetter Cc: stable@vger.kernel.org Signed-off-by: Wayne Lin Reviewed-by: Lyude Paul Signed-off-by: Lyude Paul Link: https://patchwork.freedesktop.org/patch/msgid/20240626084825.878565-3-Wayne.Lin@amd.com Signed-off-by: Greg Kroah-Hartman

drm/dp_mst: Fix all mstb marked as not probed after suspend/resume

2024-08-03T06:54:28+00:00

commit d63d81094d208abb20fc444514b2d9ec2f4b7c4e upstream. [Why] After supend/resume, with topology unchanged, observe that link_address_sent of all mstb are marked as false even the topology probing is done without any error. It is caused by wrongly also include "ret == 0" case as a probing failure case. [How] Remove inappropriate checking conditions. Cc: Lyude Paul Cc: Harry Wentland Cc: Jani Nikula Cc: Imre Deak Cc: Daniel Vetter Cc: stable@vger.kernel.org Fixes: 37dfdc55ffeb ("drm/dp_mst: Cleanup drm_dp_send_link_address() a bit") Signed-off-by: Wayne Lin Reviewed-by: Lyude Paul Signed-off-by: Lyude Paul Link: https://patchwork.freedesktop.org/patch/msgid/20240626084825.878565-2-Wayne.Lin@amd.com Signed-off-by: Greg Kroah-Hartman

drm/dp: Don't attempt AUX transfers when eDP panels are not powered

2024-06-12T09:11:57+00:00

[ Upstream commit 8df1ddb5bf11ab820ad991e164dab82c0960add9 ] If an eDP panel is not powered on then any attempts to talk to it over the DP AUX channel will timeout. Unfortunately these attempts may be quite slow. Userspace can initiate these attempts either via a /dev/drm_dp_auxN device or via the created i2c device. Making the DP AUX drivers timeout faster is a difficult proposition. In theory we could just poll the panel's HPD line in the AUX transfer function and immediately return an error there. However, this is easier said than done. For one thing, there's no hard requirement to hook the HPD line up for eDP panels and it's OK to just delay a fixed amount. For another thing, the HPD line may not be fast to probe. On parade-ps8640 we need to wait for the bridge chip's firmware to boot before we can get the HPD line and this is a slow process. The fact that the transfers are taking so long to timeout is causing real problems. The open source fwupd daemon sometimes scans DP busses looking for devices whose firmware need updating. If it happens to scan while a panel is turned off this scan can take a long time. The fwupd daemon could try to be smarter and only scan when eDP panels are turned on, but we can also improve the behavior in the kernel. Let's let eDP panels drivers specify that a panel is turned off and then modify the common AUX transfer code not to attempt a transfer in this case. Tested-by: Steev Klimaszewski Reviewed-by: Hsin-Yi Wang Tested-by: Eizan Miyamoto Acked-by: Neil Armstrong Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20240202141109.1.I24277520ac754ea538c9b14578edc94e1df11b48@changeid Stable-dep-of: 5e842d55bad7 ("drm/panel: atna33xc20: Fix unbalanced regulator in the case HPD doesn't assert") Signed-off-by: Sasha Levin

drm/dp_mst: Fix fractional DSC bpp handling

2024-01-25T23:35:31+00:00

[ Upstream commit 7707dd6022593f3edd8e182e7935870cf326f874 ] The current code does '(bpp << 4) / 16' in the MST PBN calculation, but that is just the same as 'bpp' so the DSC codepath achieves absolutely nothing. Fix it up so that the fractional part of the bpp value is actually used instead of truncated away. 64*1006 has enough zero lsbs that we can just shift that down in the dividend and thus still manage to stick to a 32bit divisor. And while touching this, let's just make the whole thing more straightforward by making the passed in bpp value .4 binary fixed point always, instead of having to pass in different things based on whether DSC is enabled or not. v2: - Fix DSC kunit test cases. Cc: Manasi Navare Cc: Lyude Paul Cc: Harry Wentland Cc: David Francis Cc: Mikita Lipski Cc: Alex Deucher Fixes: dc48529fb14e ("drm/dp_mst: Add PBN calculation for DSC modes") Signed-off-by: Ville Syrjälä [Imre: Fix kunit test cases] Acked-by: Maxime Ripard Reviewed-by: Lyude Paul Acked-by: Harry Wentland Signed-off-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-3-imre.deak@intel.com Signed-off-by: Sasha Levin

drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()

2023-10-19T20:04:59+00:00

As drm_dp_get_mst_branch_device_by_guid() is called from drm_dp_get_mst_branch_device_by_guid(), mstb parameter has to be checked, otherwise NULL dereference may occur in the call to the memcpy() and cause following: [12579.365869] BUG: kernel NULL pointer dereference, address: 0000000000000049 [12579.365878] #PF: supervisor read access in kernel mode [12579.365880] #PF: error_code(0x0000) - not-present page [12579.365882] PGD 0 P4D 0 [12579.365887] Oops: 0000 [#1] PREEMPT SMP NOPTI ... [12579.365895] Workqueue: events_long drm_dp_mst_up_req_work [12579.365899] RIP: 0010:memcmp+0xb/0x29 [12579.365921] Call Trace: [12579.365927] get_mst_branch_device_by_guid_helper+0x22/0x64 [12579.365930] drm_dp_mst_up_req_work+0x137/0x416 [12579.365933] process_one_work+0x1d0/0x419 [12579.365935] worker_thread+0x11a/0x289 [12579.365938] kthread+0x13e/0x14f [12579.365941] ? process_one_work+0x419/0x419 [12579.365943] ? kthread_blkcg+0x31/0x31 [12579.365946] ret_from_fork+0x1f/0x30 As get_mst_branch_device_by_guid_helper() is recursive, moving condition to the first line allow to remove a similar one for step over of NULL elements inside a loop. Fixes: 5e93b8208d3c ("drm/dp/mst: move GUID storage from mgr, port to only mst branch") Cc: # 4.14+ Signed-off-by: Lukasz Majczak Reviewed-by: Radoslaw Biernacki Signed-off-by: Manasi Navare Link: https://patchwork.freedesktop.org/patch/msgid/20230922063410.23626-1-lma@semihalf.com

Merge tag 'drm-misc-next-2023-07-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2023-07-17T13:37:57+00:00

drm-misc-next for v6.6: UAPI Changes: * fbdev: * Make fbdev userspace interfaces optional; only leaves the framebuffer console active * prime: * Support dma-buf self-import for all drivers automatically: improves support for many userspace compositors Cross-subsystem Changes: * backlight: * Fix interaction with fbdev in several drivers * base: Convert struct platform.remove to return void; part of a larger, tree-wide effort * dma-buf: Acquire reservation lock for mmap() in exporters; part of an on-going effort to simplify locking around dma-bufs * fbdev: * Use Linux device instead of fbdev device in many places * Use deferred-I/O helper macros in various drivers * i2c: Convert struct i2c from .probe_new to .probe; part of a larger, tree-wide effort * video: * Avoid including Core Changes: * atomic: * Improve logging * prime: * Remove struct drm_driver.gem_prime_mmap plus driver updates: all drivers now implement this callback with drm_gem_prime_mmap() * gem: * Support execution contexts: provides locking over multiple GEM objects * ttm: * Support init_on_free * Swapout fixes Driver Changes: * accel: * ivpu: MMU updates; Support debugfs * ast: * Improve device-model detection * Cleanups * bridge: * dw-hdmi: Improve support for YUV420 bus format * dw-mipi-dsi: Fix enable/disable of DSI controller * lt9611uxc: Use MODULE_FIRMWARE() * ps8640: Remove broken EDID code * samsung-dsim: Fix command transfer * tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups * Cleanups * ingenic: * Kconfig REGMAP fixes * loongson: * Support display controller * mgag200: * Minor fixes * mxsfb: * Support disabling overlay planes * nouveau: * Improve VRAM detection * Various fixes and cleanups * panel: * panel-edp: Support AUO B116XAB01.4 * Support Visionox R66451 plus DT bindings * Cleanups * ssd130x: * Support per-controller default resolution plus DT bindings * Reduce memory-allocation overhead * Cleanups * tidss: * Support TI AM625 plus DT bindings * Implement new connector model plus driver updates * vkms * Improve write-back support * Documentation fixes Signed-off-by: Daniel Vetter From: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g

Merge tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm

2023-06-29T18:00:17+00:00

Pull drm updates from Dave Airlie: "There is one set of patches to misc for a i915 gsc/mei proxy driver. Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots of refactoring. core: - replace strlcpy with strscpy - EDID changes to support further conversion to struct drm_edid - Move i915 DSC parameter code to common DRM helpers - Add Colorspace functionality aperture: - ignore framebuffers with non-primary devices fbdev: - use fbdev i/o helpers - add Kconfig options for fb_ops helpers - use new fb io helpers directly in drivers sysfs: - export DRM connector ID scheduler: - Avoid an infinite loop ttm: - store function table in .rodata - Add query for TTM mem limit - Add NUMA awareness to pools - Export ttm_pool_fini() bridge: - fsl-ldb: support i.MX6SX - lt9211, lt9611: remove blanking packets - tc358768: implement input bus formats, devm cleanups - ti-snd65dsi86: implement wait_hpd_asserted - analogix: fix endless probe loop - samsung-dsim: support swapped clock, fix enabling, support var clock - display-connector: Add support for external power supply - imx: Fix module linking - tc358762: Support reset GPIO panel: - nt36523: Support Lenovo J606F - st7703: Support Anbernic RG353V-V2 - InnoLux G070ACE-L01 support - boe-tv101wum-nl6: Improve initialization - sharp-ls043t1le001: Mode fixes - simple: BOE EV121WXM-N10-1850, S6D7AA0 - Ampire AM-800480L1TMQW-T00H - Rocktech RK043FN48H - Starry himax83102-j02 - Starry ili9882t amdgpu: - add new ctx query flag to handle reset better - add new query/set shadow buffer for rdna3 - DCN 3.2/3.1.x/3.0.x updates - Enable DC_FP on loongarch - PCIe fix for RDNA2 - improve DC FAMS/SubVP support for better power management - partition support for lots of engines - Take NUMA into account when allocating memory - Add new DRM_AMDGPU_WERROR config parameter to help with CI - Initial SMU13 overdrive support - Add support for new colorspace KMS API - W=1 fixes amdkfd: - Query TTM mem limit rather than hardcoding it - GC 9.4.3 partition support - Handle NUMA for partitions - Add debugger interface for enabling gdb - Add KFD event age tracking radeon: - Fix possible UAF i915: - new getparam for PXP support - GSC/MEI proxy driver - Meteorlake display enablement - avoid clearing preallocated framebuffers with TTM - implement framebuffer mmap support - Disable sampler indirect state in bindless heap - Enable fdinfo for GuC backends - GuC loading and firmware table handling fixes - Various refactors for multi-tile enablement - Define MOCS and PAT tables for MTL - GSC/MEI support for Meteorlake - PMU multi-tile support - Large driver kernel doc cleanup - Allow VRR toggling and arbitrary refresh rates - Support async flips on linear buffers on display ver 12+ - Expose CRTC CTM property on ILK/SNB/VLV - New debugfs for display clock frequencies - Hotplug refactoring - Display refactoring - I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake - Use large rings for compute contexts - HuC loading for MTL - Allow user to set cache at BO creation - MTL powermanagement enhancements - Switch to dedicated workqueues to stop using flush_scheduled_work() - Move display runtime init under display/ - Remove 10bit gamma on desktop gen3 parts, they don't support it habanalabs: - uapi: return 0 for user queries if there was a h/w or f/w error - Add pci health check when we lose connection with the firmware. This can be used to distinguish between pci link down and firmware getting stuck. - Add more info to the error print when TPC interrupt occur. - Firmware fixes msm: - Adreno A660 bindings - SM8350 MDSS bindings fix - Added support for DPU on sm6350 and sm6375 platforms - Implemented tearcheck support to support vsync on SM150 and newer platforms - Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450 - Added support for DSI and 28nm DSI PHY on MSM8226 platform - Added support for DSI on sm6350 and sm6375 platforms - Added support for display controller on MSM8226 platform - A690 GPU support - Move cmdstream dumping out of fence signaling path - a610 support - Support for a6xx devices without GMU nouveau: - NULL ptr before deref fixes armada: - implement fbdev emulation as client sun4i: - fix mipi-dsi dotclock - release clocks vc4: - rgb range toggle property - BT601 / BT2020 HDMI support vkms: - convert to drmm helpers - add reflection and rotation support - fix rgb565 conversion gma500: - fix iomem access shmobile: - support renesas soc platform - enable fbdev mxsfb: - Add support for i.MX93 LCDIF stm: - dsi: Use devm_ helper - ltdc: Fix potential invalid pointer deref renesas: - Group drivers in renesas subdirectory to prepare for new platform - Drop deprecated R-Car H3 ES1.x support meson: - Add support for MIPI DSI displays virtio: - add sync object support mediatek: - Add display binding document for MT6795" * tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits) drm/i915: Fix a NULL vs IS_ERR() bug drm/i915: make i915_drm_client_fdinfo() reference conditional again drm/i915/huc: Fix missing error code in intel_huc_init() drm/i915/gsc: take a wakeref for the proxy-init-completion check drm/msm/a6xx: Add A610 speedbin support drm/msm/a6xx: Add A619_holi speedbin support drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching drm/msm/a6xx: Use "else if" in GPU speedbin rev matching drm/msm/a6xx: Fix some A619 tunables drm/msm/a6xx: Add A610 support drm/msm/a6xx: Add support for A619_holi drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations drm/msm/a6xx: Introduce GMU wrapper support drm/msm/a6xx: Move CX GMU power counter enablement to hw_init drm/msm/a6xx: Extend and explain UBWC config drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init drm/msm/a6xx: Add a helper for software-resetting the GPU drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions() drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off() ...

Merge tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2023-06-28T04:24:18+00:00

Pull hardening updates from Kees Cook: "There are three areas of note: A bunch of strlcpy()->strscpy() conversions ended up living in my tree since they were either Acked by maintainers for me to carry, or got ignored for multiple weeks (and were trivial changes). The compiler option '-fstrict-flex-arrays=3' has been enabled globally, and has been in -next for the entire devel cycle. This changes compiler diagnostics (though mainly just -Warray-bounds which is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_ coverage. In other words, there are no new restrictions, just potentially new warnings. Any new FORTIFY warnings we've seen have been fixed (usually in their respective subsystem trees). For more details, see commit df8fc4e934c12b. The under-development compiler attribute __counted_by has been added so that we can start annotating flexible array members with their associated structure member that tracks the count of flexible array elements at run-time. It is possible (likely?) that the exact syntax of the attribute will change before it is finalized, but GCC and Clang are working together to sort it out. Any changes can be made to the macro while we continue to add annotations. As an example of that last case, I have a treewide commit waiting with such annotations found via Coccinelle: https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b Also see commit dd06e72e68bcb4 for more details. Summary: - Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko) - Convert strreplace() to return string start (Andy Shevchenko) - Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook) - Add missing function prototypes seen with W=1 (Arnd Bergmann) - Fix strscpy() kerndoc typo (Arne Welzel) - Replace strlcpy() with strscpy() across many subsystems which were either Acked by respective maintainers or were trivial changes that went ignored for multiple weeks (Azeem Shaikh) - Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers) - Add KUnit tests for strcat()-family - Enable KUnit tests of FORTIFY wrappers under UML - Add more complete FORTIFY protections for strlcat() - Add missed disabling of FORTIFY for all arch purgatories. - Enable -fstrict-flex-arrays=3 globally - Tightening UBSAN_BOUNDS when using GCC - Improve checkpatch to check for strcpy, strncpy, and fake flex arrays - Improve use of const variables in FORTIFY - Add requested struct_size_t() helper for types not pointers - Add __counted_by macro for annotating flexible array size members" * tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits) netfilter: ipset: Replace strlcpy with strscpy uml: Replace strlcpy with strscpy um: Use HOST_DIR for mrproper kallsyms: Replace all non-returning strlcpy with strscpy sh: Replace all non-returning strlcpy with strscpy of/flattree: Replace all non-returning strlcpy with strscpy sparc64: Replace all non-returning strlcpy with strscpy Hexagon: Replace all non-returning strlcpy with strscpy kobject: Use return value of strreplace() lib/string_helpers: Change returned value of the strreplace() jbd2: Avoid printing outside the boundary of the buffer checkpatch: Check for 0-length and 1-element arrays riscv/purgatory: Do not use fortified string functions s390/purgatory: Do not use fortified string functions x86/purgatory: Do not use fortified string functions acpi: Replace struct acpi_table_slit 1-element array with flex-array clocksource: Replace all non-returning strlcpy with strscpy string: use __builtin_memcpy() in strlcpy/strlcat staging: most: Replace all non-returning strlcpy with strscpy drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy ...

drm/sysfs: rename drm_sysfs_connector_status_event()

2023-06-23T13:54:00+00:00

Rename drm_sysfs_connector_status_event() to drm_sysfs_connector_property_event(). Indeed, "status" is a bit vague: it can easily be confused with the connected/disconnected status of the connector. This function has nothing to do with connected/disconnected: it merely sends a notification that a connector's property has changed (e.g. HDCP, privacy screen, etc). Signed-off-by: Simon Ser Cc: Manasi Navare Cc: Sam Ravnborg Cc: Harry Wentland Cc: Daniel Vetter Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20230620174231.260335-1-contact@emersion.fr

drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2

2023-06-20T20:00:09+00:00

I've been experiencing some intermittent crashes down in the display driver code. The symptoms are ususally a line like this in dmesg: amdgpu 0000:30:00.0: [drm] Failed to create MST payload for port 000000006d3a3885: -5 ...followed by an Oops due to a NULL pointer dereference. Switch to using mgr->dev instead of state->dev since "state" can be NULL in some cases. Link: https://bugzilla.redhat.com/show_bug.cgi?id=2184855 Suggested-by: Jani Nikula Signed-off-by: Jeff Layton Reviewed-by: Jani Nikula Reviewed-by: Lyude Paul Signed-off-by: Lyude Paul Link: https://patchwork.freedesktop.org/patch/msgid/20230419112447.18471-1-jlayton@kernel.org