kernel/linux.git/drivers/gpu/drm/display, branch v6.11.8

drm/connector: hdmi: Fix writing Dynamic Range Mastering infoframes

2024-10-10T10:03:02+00:00

[ Upstream commit f0fa69b5011a45394554fb8061d74fee4d7cd72c ] The largest infoframe we create is the DRM (Dynamic Range Mastering) infoframe which is 26 bytes + a 4 byte header, for a total of 30 bytes. With HDMI_MAX_INFOFRAME_SIZE set to 29 bytes, as it is now, we allocate too little space to pack a DRM infoframe in write_device_infoframe(), leading to an ENOSPC return from hdmi_infoframe_pack(), and never calling the connector's write_infoframe() vfunc. Instead of having HDMI_MAX_INFOFRAME_SIZE defined in two places, replace HDMI_MAX_INFOFRAME_SIZE with HDMI_INFOFRAME_SIZE(MAX) and make MAX 27 bytes - which is defined by the HDMI specification to be the largest infoframe payload. Fixes: f378b77227bc ("drm/connector: hdmi: Add Infoframes generation") Fixes: c602e4959a0c ("drm/connector: hdmi: Create Infoframe DebugFS entries") Signed-off-by: Derek Foreman Acked-by: Maxime Ripard Reviewed-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20240827163918.48160-1-derek.foreman@collabora.com Signed-off-by: Maxime Ripard Signed-off-by: Sasha Levin

drm/bridge-connector: reset the HDMI connector state

2024-09-03T08:18:31+00:00

On HDMI connectors which use drm_bridge_connector and DRM_BRIDGE_OP_HDMI IGT chokes on the max_bpc property in several kms_properties tests due to the drm_bridge_connector failing to reset HDMI-related properties. Call __drm_atomic_helper_connector_hdmi_reset() if the drm_bridge_connector has bridge_hdmi. It is impossible to call this function from HDMI bridges, none of the bridge callbacks correspond to the drm_connector_funcs::reset(). Fixes: 6b4468b0c6ba ("drm/bridge-connector: implement glue code for HDMI connector") Reviewed-by: Maxime Ripard Acked-by: Maxime Ripard Reviewed-by: Abhinav Kumar Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-3-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard

drm/bridge-connector: move to DRM_DISPLAY_HELPER module

2024-09-03T08:18:31+00:00

drm_bridge_connector is a "leaf" driver, belonging to the display helper, rather than the "CRTC" drm_kms_helper module. Move the driver to the drm/display and add necessary Kconfig selection clauses. Suggested-by: Maxime Ripard Acked-by: Maxime Ripard Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard

drm/display: stop depending on DRM_DISPLAY_HELPER

2024-09-03T08:18:28+00:00

Kconfig symbols should not declare dependency on DRM_DISPLAY_HELPER. Move all parts of DRM_DISPLAY_HELPER to an if DRM_DISPLAY_HELPER block. It is not possible to make those symbols select DRM_DISPLAY_HELPER because of the link issues when a part of the helper is selected to be built-in, while other part is selected to be as module. In such a case the modular part doesn't get built at all, leading to undefined symbols. The only viable alternative is to split drm_display_helper.ko into several small modules, each of them having their own dependencies. Suggested-by: Maxime Ripard Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-1-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard

Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2024-07-25T17:42:22+00:00

Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ...

drm/display/dsc: Add a helper to dump the DSC configuration

2024-07-03T15:05:12+00:00

Add a helper to dump the Display Stream Compression configuration, taken into use in the i915 driver by a later patch. v2: - Rebase on the s/DRM_X16/FXP_Q4 change. - s/DSC configration/DSC configuration in the function documentation. Acked-by: Jani Nikula Signed-off-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20240628164451.1177612-3-imre.deak@intel.com

drm: Add helpers for q4 fixed point values

2024-07-03T15:05:12+00:00

Add helpers to convert between q4 fixed point and integer/fraction values. Also add the format/argument macros required to printk q4 fixed point variables. The q4 notation is based on the short variant described by https://en.wikipedia.org/wiki/Q_(number_format) where only the number of fraction bits in the fixed point value are defined, while the full size is deducted from the container type, that is the size of int for these helpers. Using the fxp_ prefix, which makes moving these helpers outside of drm to a more generic place easier, if they prove to be useful. These are needed by later patches dumping the Display Stream Compression configuration in DRM core and in the i915 driver to replace the corresponding bpp_x16 helpers defined locally in the driver. v2: Use the more generic/descriptive fxp_q4 prefix instead of drm_x16. (Jani) Cc: Jani Nikula Acked-by: Jani Nikula Signed-off-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20240628164451.1177612-2-imre.deak@intel.com

drm/dp_mst: Skip CSN if topology probing is not done yet

2024-07-03T13:55:54+00:00

[Why] During resume, observe that we receive CSN event before we start topology probing. Handling CSN at this moment based on uncertain topology is unnecessary. [How] Add checking condition in drm_dp_mst_handle_up_req() to skip handling CSN if the topology is yet to be probed. Cc: Lyude Paul Cc: Harry Wentland Cc: Jani Nikula Cc: Imre Deak Cc: Daniel Vetter Cc: stable@vger.kernel.org Signed-off-by: Wayne Lin Reviewed-by: Lyude Paul Signed-off-by: Lyude Paul Link: https://patchwork.freedesktop.org/patch/msgid/20240626084825.878565-3-Wayne.Lin@amd.com

drm/dp_mst: Fix all mstb marked as not probed after suspend/resume

2024-07-03T13:55:27+00:00

[Why] After supend/resume, with topology unchanged, observe that link_address_sent of all mstb are marked as false even the topology probing is done without any error. It is caused by wrongly also include "ret == 0" case as a probing failure case. [How] Remove inappropriate checking conditions. Cc: Lyude Paul Cc: Harry Wentland Cc: Jani Nikula Cc: Imre Deak Cc: Daniel Vetter Cc: stable@vger.kernel.org Fixes: 37dfdc55ffeb ("drm/dp_mst: Cleanup drm_dp_send_link_address() a bit") Signed-off-by: Wayne Lin Reviewed-by: Lyude Paul Signed-off-by: Lyude Paul Link: https://patchwork.freedesktop.org/patch/msgid/20240626084825.878565-2-Wayne.Lin@amd.com

driver core: have match() callback in struct bus_type take a const *

2024-07-03T13:16:54+00:00

In the match() callback, the struct device_driver * should not be changed, so change the function callback to be a const *. This is one step of many towards making the driver core safe to have struct device_driver in read-only memory. Because the match() callback is in all busses, all busses are modified to handle this properly. This does entail switching some container_of() calls to container_of_const() to properly handle the constant *. For some busses, like PCI and USB and HV, the const * is cast away in the match callback as those busses do want to modify those structures at this point in time (they have a local lock in the driver structure.) That will have to be changed in the future if they wish to have their struct device * in read-only-memory. Cc: Rafael J. Wysocki Reviewed-by: Alex Elder Acked-by: Sumit Garg Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh Signed-off-by: Greg Kroah-Hartman