kernel/linux.git/drivers/gpu/drm/display/Makefile, branch v6.19.11

drm/display: add CEC helpers code

2025-05-20T22:35:16+00:00

Add generic CEC helpers to be used by HDMI drivers. Both notifier and and adapter are supported for registration. Once registered, the driver can call common set of functions to update physical address, to invalidate it or to unregister CEC data. Unlike drm_connector_cec_funcs (which provides interface common to all implementations, including, but not limited to the CEC adapter, CEC notifier, CEC pin-based adapter, etc) the struct drm_connector_hdmi_cec_adapter_ops provides callbacks specific to the CEC adapter implementations. Signed-off-by: Dmitry Baryshkov Reviewed-by: Maxime Ripard Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-5-35651db6f19b@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov

drm/connector: implement generic HDMI audio helpers

2025-01-04T06:47:11+00:00

Several DRM drivers implement HDMI codec support (despite its name it applies to both HDMI and DisplayPort drivers). Implement generic framework to be used by these drivers. This removes a requirement to implement get_eld() callback and provides default implementation for codec's plug handling. Acked-by: Maxime Ripard Tested-by: Dave Stevenson Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-3-dc89577cd438@linaro.org Signed-off-by: Dmitry Baryshkov

Merge drm/drm-next into drm-misc-next

2024-09-11T07:48:49+00:00

Backmerging to get fixes from v6.12-rc7. Signed-off-by: Thomas Zimmermann

drm/bridge-connector: move to DRM_DISPLAY_HELPER module

2024-09-03T08:18:31+00:00

drm_bridge_connector is a "leaf" driver, belonging to the display helper, rather than the "CRTC" drm_kms_helper module. Move the driver to the drm/display and add necessary Kconfig selection clauses. Suggested-by: Maxime Ripard Acked-by: Maxime Ripard Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard

drm/display: split DSC helpers from DP helpers

2024-09-02T21:13:44+00:00

Currently the DRM DSC functions are selected by the DRM_DISPLAY_DP_HELPER Kconfig symbol. This is not optimal, since the DSI code (both panel and host drivers) end up selecting the seemingly irrelevant DP helpers. Split the DSC code to be guarded by the separate DRM_DISPLAY_DSC_HELPER Kconfig symbol. Reviewed-by: Jessica Zhang Reviewed-by: Marijn Suijten Acked-by: Rodrigo Vivi #i915 Acked-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20240704-panel-sw43408-fix-v6-1-3ea1c94bbb9b@linaro.org Signed-off-by: Dmitry Baryshkov

drm/connector: hdmi: Create an HDMI sub-state

2024-05-28T07:57:08+00:00

The next features we will need to share across drivers will need to store some parameters for drivers to use, such as the selected output format. Let's create a new connector sub-state dedicated to HDMI controllers, that will eventually store everything we need. Reviewed-by: Dave Stevenson Reviewed-by: Sui Jingfeng Reviewed-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-3-c5af16c3aae2@kernel.org Signed-off-by: Maxime Ripard

drm/display: Make DisplayPort CEC-over-AUX Kconfig name consistent

2024-03-28T10:26:47+00:00

While most display helpers Kconfig symbols have the DRM_DISPLAY prefix, the DisplayPort CEC tunnelling implementation uses CONFIG_DRM_DISPLAY_DP_AUX_CEC. Since the number of users is limited, we can easily rename it to make it consistent. Reviewed-by: Jani Nikula Reviewed-by: Lucas De Marchi Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-4-eafee11b84b3@kernel.org Signed-off-by: Maxime Ripard

drm/display: Make DisplayPort AUX Chardev Kconfig name consistent

2024-03-28T10:26:46+00:00

While most display helpers Kconfig symbols have the DRM_DISPLAY prefix, the DisplayPort-AUX chardev interface uses DRM_DP_AUX_CHARDEV. Since the number of users is limited and it's a selected symbol, we can easily rename it to make it consistent. Reviewed-by: Jani Nikula Reviewed-by: Lucas De Marchi Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-3-eafee11b84b3@kernel.org Signed-off-by: Maxime Ripard

drm/display: Make DisplayPort AUX bus Kconfig name consistent

2024-03-28T10:26:36+00:00

While most display helpers Kconfig symbols have the DRM_DISPLAY prefix, the DisplayPort AUX bus implementation uses DRM_DP_AUX_BUS. Since the number of users is limited and it's a selected symbol, we can easily rename it to make it consistent. Reviewed-by: Jani Nikula Reviewed-by: Lucas De Marchi Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-1-eafee11b84b3@kernel.org Signed-off-by: Maxime Ripard

drm/dp: Add support for DP tunneling

2024-02-27T15:34:10+00:00

Add support for Display Port tunneling. For now this includes the support for Bandwidth Allocation Mode (BWA), leaving adding Panel Replay support for later. BWA allows using displays that share the same (Thunderbolt) link with their maximum resolution. Atm, this may not be possible due to the coarse granularity of partitioning the link BW among the displays on the link: the BW allocation policy is in a SW/FW/HW component on the link (on Thunderbolt it's the SW or FW Connection Manager), independent of the driver. This policy will set the DPRX maximum rate and lane count DPCD registers the GFX driver will see (0x00000, 0x00001, 0x02200, 0x02201) based on the available link BW. The granularity of the current BW allocation policy is coarse, based on the required link rate in the 1.62Gbs..8.1Gbps range and it may prevent using higher resolutions all together: the display connected first will get a share of the link BW which corresponds to its full DPRX capability (regardless of the actual mode it uses). A subsequent display connected will only get the remaining BW, which could be well below its full capability. BWA solves the above coarse granularity (reducing it to a 250Mbs..1Gps range) and first-come/first-served issues by letting the driver request the BW for each display on a link which reflects the actual modes the displays use. This patch adds the DRM core helper functions, while a follow-up change in the patchset takes them into use in the i915 driver. v2: - Fix prepare_to_wait vs. wake-up cond check order in allocate_tunnel_bw(). (Ville) - Move tunnel==NULL checks from callers in drivers to here. (Ville) - Avoid var inits in declaration blocks that can fail or have side-effects. (Ville) - Use u8 for driver and group IDs. (Ville) - Simplify API removing drm_dp_tunnel_get/put_untracked(). (Ville) - Reuse str_yes_no() instead of a local yes_no_chr(). (Ville) - s/drm_dp_tunnel_atomic_clear_state()/free_tunnel_state() and unexport the function. (Ville) - s/clear_tunnel_group_state()/free_group_state() and move kfree() to this function. (Ville) - Add separate group_free_bw() helper and describe what the tunnel estimated BW includes. (Ville) - Improve help text for CONFIG_DRM_DISPLAY_DP_TUNNEL. (Ville) - Add code comment explaining the purpose of DPCD reg read helpers. (Ville) - Add code comment describing the tunnel group name prefix format. (Ville) - Report the allocated BW as undetermined until the first allocation request. - Skip allocation requests matching the previous request. - Clear any stale BW request status flags before a new request. - Add missing error return check of drm_dp_tunnel_atomic_get_group_state() in drm_dp_tunnel_atomic_set_stream_bw(). - Add drm_dp_tunnel_get_allocated_bw(). - s/drm_dp_tunnel_atomic_get_tunnel_bw/drm_dp_tunnel_atomic_get_required_bw - Fix return value description in function doc of drm_dp_tunnel_detect(). - Add function documentation to all exported functions. v3: - Improve grouping of fields in drm_dp_tunnel_group struct. (Uma) - Fix validating the BW granularity DPCD reg value. (Uma) - Document return value of check_and_clear_status_change(). (Uma) - Fix resetting drm_dp_tunnel_ref::tunnel in drm_dp_tunnel_ref_put(). (Ville) - Allow for ALLOCATED_BW to change after a BWA enable/disable sequence. Cc: Ville Syrjälä Reviewed-by: Uma Shankar Reviewed-by: Ville Syrjälä Signed-off-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-2-imre.deak@intel.com